Find the ratio of the volume divided by the
temperature for the first data pair. Use significant
figures.
V/T=0.72/276= 0.002 ✓
COMPLETE
Now do the same computation for all six pairs of
values. What is the average of all six fractions V/
T?
Answers
From the pair of values given, the ratio of the volume to the temperature for the first data pair is, 0.0026 cm³/K
What is a Ratio?A ratio is a comparison between two quantities showing how much one quantity differs from another.
From the data given, the first data pair is as follows ;
Temperature = 276 KVolume = 0.72 cm³Ratio of volume to temperature = volume / temperature
Ratio = 0.72 / 276
Ratio = 0.002608 cm³/K
The significant figure's rule for division is the least number of significant figures used in the operation.
The least significant figure of the values given is 2.
Therefore, the ratio of the volume to the temperature for the first data pair is 0.0026 cm³/K
Learn more about ratio here :
brainly.com/question/25927869
#SPJ1
Answer:
0.0026
Explanation:
edge 2022 it's the same answer for both parts
Related Questions
What is the complete ionic equation for NaOH(aq) + HCl(aq) → H₂O()) + NaCl(aq)?
Answers
Answer:
OH-(aq)+H+(aq)->H2O(l)
Answer is shown in photo.
Explanation :
APEX
Which element is most likely to have a high thermal conductivity
Answers
Copper has the highest thermal conductivity as compared to other metals in the periodic table.
What is thermal conductivity?Thermal conductivity refers to the rate at which heat is transferred by conduction through a unit cross-section area of a material. When a temperature increases at one end it moves to the other end through conduction.
So we can conclude that Copper has the highest thermal conductivity as compared to other metals in the periodic table.
Learn more about thermal here: https://brainly.com/question/19666326
#SPJ1
How much percent of shops are in the city? How about in the country?
HELP PLS WILL GIVE BRAINLY FAST
Answers
Answer:
I would say there would be 5-10% in a city, and maybe 10-20% in the country. It mainly varies depending on how big the city is, how many people/districts there are, and the size of the country, which makes it hard to give a certain percent of shops, as there may be small businesses included as well or new shops being built.
Hope this helps! This was pretty confusing for me as well so i hope the answer is alright (×﹏×)
Warning signs are sometimes placed on aerosol cans to prevent people from throwing them into a fire. What is true about the gas in the aerosol can after it is placed in a fire? Check all that apply.
Answers
Answer:
If the gas in the aerosol is placed in a fire then the volume will remain constant.
Explanation:
Avogadro's Law provides the formula needed to determine the relationship between the gas amount and volume present in a container.
Plez na me brainliestt
In What season of Breaking Bad did the character Walter White die.
Answers
Answer:
Season 5 lol
Explanation:
Answer:
season 1
Explanation:
the man was shot rip
What functional group is found in a carboxylic acid?
OA. Ester
B. Amino
C. Carbonyl
D. Hydroxyl
Answers
Answer:
the answer is c
Explanation:
A carboxylic acid is an organic compound that contains the carboxyl functional group.
the physical matter of which living or non living things are composed is called a
Answers
The physical matter of which living or non living things are composed is called a molecule
What is a molecule?A molecule is the smallest particle of an element or a compound which can normally exist alone and still retain the properties of that substance.
A molecule could be made up of an atom of an element of different atoms of elements such as:
HydrogenOxygenCarbonSodiumPotassiumMagnesiumSo therefore, the physical matter of which living or non living things are composed is called a molecule.
Learn more about molecules:
https://brainly.com/question/17150869
#SPJ1
A volumetric pipette has one marked line that indicates a specific volume. Considering polar substances dip downward in a glass volumetric pippette creating a concave meniscus, what is the correct way to read a volumetric pipette to have the most accurate measurement?.
Answers
The best way to make an accurate measurement of the height of a polar liquid is to take the reading from the lowest point of the meniscus.
What is the meniscus of a liquid?The meniscus of a liquid is a curved that occurs at the top of a liquid placed in a container as a result of the attractive forces between the molecules of a the liquid.
Polar substances such as water have a concave meniscus as they dip downwards.
Therefore, the best way to make an accurate measurement of the height of a polar liquid is to take the reading from the lowest point of the meniscus.
Learn more about meniscus at: https://brainly.com/question/10868896
#SPJ1
write the transitional metals and their electronic configuration
Answers
Answer:
yo no se nada
Explanation:
solo se que no se nada xd
PLEASE answer ASP.
How is the strength of an electrostatic force determined?
Answers
Answer:
Explanation:The ratio of Coulomb force to gravitational force for an electron and a proton is given as,
r
1
=
R
2
Gm
1
m
2
4πε
0
1
×
R
2
q
1
q
2
=
6.67×10
−11
×9.1×10
−31
×1.67×10
−27
9×10
9
×(1.6×10
−19
)×(1.6×10
−19
)
=
1
2.27×10
39
The ratio of Coulomb force to gravitational force for two protons is given as,
r
2
=
R
2
Gm
2
4πε
0
1
×
R
2
q
1
q
2
=
6.67×10
−11
×(1.67×10
−27
)
2
9×10
9
×(1.6×10
−19
)×(1.6×10
−19
)
=
1
1.24×10
36
(b)
The magnitude of Coulomb force between electron and proton is given as,
F=
4πε
0
1
×
R
2
q
1
q
2
=
(10
−10
)
2
9×10
9
×(1.6×10
−19
)×(1.6×10
−19
)
=2.304×10
−8
N
The acceleration of electron is given as,
a
1
=
m
1
F
=
9.1×10
−31
2.304×10
−8
=2.5×10
22
m/s
2
The acceleration of proton is given as,
a
2
=
m
2
F
=
1.67×10
−27
2.304×10
−8
=1.4×10
19
m/s
2
2. The table below shows the atomic numbers of elements of the periodic table represented by letters I to Q The letters are not the actual chemical symbols for the elements. Element J Atomic number www I 且 } T H 3 Lithiur K 7 Witrogen 8 Select two elements which belong ta Olygin The same period of the periodic table Jk The same group of the period table. Select the element which: twitt form a divalent andon Reacts murst vigorously with water. 9 N Home 10 (Ink (1mk bºr (Ink 12 May Nashy 13 Aluminian C 14 St Veer
Answers
Explanation:
cudhdbsieehe eirbruwnee8ebeuw eodjsuww8
There are two common oxides of copper; one is 80% copper and the other is 89% copper by weight. Calculate the formula and name each compound.
Answers
80% copper (Cu)
Cu: 80 : 63.546 = 1.259
O: 20 : 16 = 1.25
Cu:O = 1 : 1
the formula: CuO
89% copper (Cu)
Cu: 89 : 63.546 = 1.4
O: 11 : 16 = 0.6875
Cu:O = 2:1
the formula: Cu₂O
A substance has a melting point of 80 °C. Which of the following is true for the substance? (5 points)
a) It will also change from a liquid to a gas at 80 °C while the liquid loses energy.
b) It will also change from a liquid to a gas at 80 °C while the liquid gains energy.
c) It will also change from a liquid to a solid at 80 °C while the liquid gains energy.
d) It will also change from a liquid to a solid at 80 °C while the liquid loses energy.
Answers
Answer:
D
Explanation:
The liquid loses energy while being cooled. It therefore changes to a solid when the liquid is cooled from a temperature above 80°C to 80°C
A substance has a melting point of 80 °C. It will also change from a liquid to a solid at 80 °C while the liquid loses energy and the correct option is option D.
At the substance's melting point of 80 °C, it undergoes a phase transition from a liquid to a solid. During this transition, the substance loses energy to the surroundings as it releases heat to form a solid structure. The process is called solidification or freezing.
As the substance cools down from a higher temperature to 80 °C, its molecules lose kinetic energy, and they arrange themselves into a more ordered and stable lattice, resulting in the formation of a solid. This release of energy is why the liquid loses energy during the transition. Once the substance reaches 80 °C, it remains at this temperature until the entire amount has solidified.
Thus, the ideal selection is option D.
Learn more about Melting point, here:
https://brainly.com/question/20551307
#SPJ3
The density of water is 1 g/cm3. brent used the following method to convert 1 g/cm3 to kg/m3.
(1 kg = 1,000 g and 1 m = 100 cm)
what is the error in brent's conversion method?
a - 1 kg should be written as 1 g.
b - (1 m)3 should be written as (1 cm)3.
c - 1,000 kg should be written as 1,000 g.
d - (100 cm)3 should be written as (100 m)3.
Answers
Answer:
a) The wrong denominator for the equivalent fraction of kilograms to grams
b) The use of the scale factor of length rather than the scale factor of volume for the equivalent fraction of cubic centimeters to cubic meters
c) The arrival at the correct 1000 kg/m³ rather than 0.1 g/m³ based on the expression on the left of the equation
The density of water = 1 g/cm³
The given equation is presented as follows;
1 g/cm³ × 1 kg/(1000 kg) × 100 cm³/(1 m³) = 1000 kg/m³
The error in the conversion method are;
a) The conversion, 1 kg/(1,000 kg) has an error, the correct conversion is (1 kg)/1,000 g)
b) The volume conversion error, 100 cm³/(1 m³), the correct volume conversion is (100 cm)³/(1 m³) = 1,000,000 cm³/(1 m³)
c) The right of the equal to sign error; using the left side expression only, the (wrong) answer is 0.1 g/m³
The correct equation is presented as follows;
1 g/cm³ × 1 kg/(1000 g) × 1,000,000 cm³/(1 m³) = 1000 kg/m³
Explanation: hope this help.
Answer:
c - 1,000 kg should be written as 1,000 g.
Explanation:
got it correct on the test.
b) Explain what happens when a drop of concentrated sugar solution is placed on a rheo leaf peel mounted on a glass slide. Name this phenomenon. Would the same happen if the rheo leaf was boiled before mounting? Give reason for your answer
Answers
The rheo leaf peel will lose water by osmosis and become flaccid. If the rheo leaf was boiled, this would not happen.
What is osmosis?Across living membranes, water moves from a region of high to a region of low water potential.
Concentrated sugar solutions have low water potential when compared to the cell sap of the cells of rheo leaf peel. Thus, water will move from the rheo leaf peel to the sugar solution.
This will result in the wilting of the leaf peel.
If the leaf peel is boiled, the membranes in the cells die and can no longer function as a selectively permeable interface.
More on osmosis can be found here: https://brainly.com/question/1799974
#SPJ1
In a titration, 25.0 mL of a 0.40 M NaOH solution is used to neutralize 10.0 mL of HCl. Calculate the molarity of the acid.
Answers
The molarity of the HCl acid will be 0.001 M.
What is Neutralization ?A neutralization reaction is when an acid and a base react to form water and a salt and involves the combination of H⁺ ions and OH⁻ ions to generate water.
This is the neutralization of a strong acid (HCl) and a strong base (NaOH), which is ruled by this equation :
HCl (aq) + NaOH (aq) → NaCl (aq) + H₂O (l)
Mole Ratio : 1 mol HCl : 1 mol NaOH
Formula used ;
Molarity = number of moles / Volume (in liters)
Solve for n ;
n = M × V
Substitute values and compute ;
n = 0.40 M × 0.025 liter = 0.01 moles NaOH.
As the molar ratio is NaOH : HCl
Therefore, there will be same number mole for the HCl
Now, Molarity of HCl Solution ;
Molarity = n / volume
Molarity = 0.01 / 10
= 0.001 M HCl
Hence, The molarity of the HCl acid will be 0.001 M.
Learn more about neutralization here ;
https://brainly.com/question/16188332
#SPJ1
what is carbon cycle
Answers
which sugar is called milk sugar
Answers
Answer:
Lactose is called milk sugar.
Explanation:
Hope It Helps!!!
Answer:
lactose
Explanation:
credits to the answer above !
How many moles of electrons are transferred when 2.0 moles of aluminum metal react with excess copper(II) nitrate in aqueous solution to form Al(NO3)3(aq) and Cu(s)
Answers
Moles of electrons:
The moles of electrons that are transferred are 12F
A balanced equation:
2 moles of Aluminium metal react with excess copper(II) nitrate.
[tex]2Al + 3Cu{(NO_3)}_2 \rightarrow 2Al{(NO_3)}_3 +3 Cu[/tex]
Given:
Moles of Aluminium = 2
As Aluminium goes from 0 to +3 oxidation state
[tex]Al \rightarrow Al^{3+} + 3e^-[/tex]
And copper goes from +2 to 0
[tex]Cu^{2+} + 2e^-\rightarrow Cu[/tex]
On balancing the number of electrons we get:
For 1 mole of Al [tex]6e^-[/tex] is required.
Therefore for 2 moles of Al,
Total [tex](2\times6)[/tex]F mole of electrons
Where F= Faraday's constant= 96500 C
So, 12F moles of electrons are transferred.
Learn more about Faraday's Law here,
https://brainly.com/question/27985929
#SPJ4
12.11 liters of gas at atmospheric pressure is compressed into a 0.669 L gas cylinder. What is the pressure (mm Hg) of the compressed gas if its temperature remains constant?
a. 1.38e4
b. 42.0
c. 93.8
d. 18.1
Answers
Answer:
a. [tex]P_2=1.38*10^4[mmHg][/tex]
Explanation:
If the Temperature of a gas remains constant (and if the amount of gas molecules doesn't change), then compressing the gas from 12.11 L to 0.669L will increase its pressure through Boyle's Law: [tex]P_1V_1=P_2V_2[/tex]
We'll also need to recall that atmospheric pressure with units of mmHg (since that is the unit requested in the answer) is 760 mmHg.
Letting the initial Pressure and Volume be the P1 and V1, and the final pressure be the P2 and V2, we can substitute and solve:
[tex]P_1V_1=P_2V_2[/tex]
[tex](760[mmHg])(12.11[L])=P_2(0.669[L])[/tex]
[tex]\dfrac{(760[mmHg])(12.11[L \!\!\!\!-])}{0.669[L \!\!\!\!-]}=\dfrac{P_2(0.669[L]\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----})}{0.669[L]\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----}}[/tex]
[tex]13757.2496[mmHg]=P_2[/tex]
Since the final pressure is only measured to 3 significant figures, we round the pressure accordingly
[tex]13800[mmHg]=P_2[/tex]
Note that in scientific notation, this is [tex]P_2=1.38*10^4[mmHg][/tex], occasionally written as [tex]1.38\text{E}4[mmHg][/tex]
How many hydrogen bonds will be found within an alpha helix that is 18 amino acids long?.
Answers
An alpha helix which is 18 amino acids long will have 12 hydrogen bonds.
What is alpha helix (α-helix) ?The alpha helix (α-helix) is a common in the secondary structure of proteins and is a right hand-helix conformation in which every backbone N−H group hydrogen bonds to the backbone C=O. group of the amino acid located four residues earlier along the protein sequence.
The alpha helix is stabilized by hydrogen bonds (shown as dashed lines) from the carbonyl oxygen of one amino acid to the amino group of a second amino acid.
Because the amino acids connected by each hydrogen bond are four apart in the primary sequence, these main chain hydrogen bonds are called "n to n+4.
Learn more about protein structure here ;
https://brainly.com/question/14652022
#SPJ1
. You need to prepare 755ml of a 3.50M solution of sodium hydroxide solution. If
the original solution had a molarity of 20.0M how much should you take out to
make the diluted solution?
Answers
M₁V₁=M₂V₂
20 x V₁ = 3.5 x 755
V₁ = 132.125 ml
What are two ways in which the safe house of lean might influence a product owner?
Answers
The safe house of lean might influence a product owner to provide better customer service.
What is the main purpose of safe house of lean?The safe house of lean is designed to provide ultimate value to the customer one the shortest possible time.
Employing the safe house of lean might influence the product owner in the following two ways:
enable the product ownerr work together with Agile Teams to develop stories with clear acceptance criteria.assist Agile Teams gain a clear understanding of their customers and how best to serve them.Therefore, the safe house of lean might influence a product owner to provide better customer service.
Learn more about customer service at: https://brainly.com/question/10714566
#SPJ12
Phase change involves changing states of matter (solid-liquid-gas). How do these three states of matter differ from each other? (on a molecular level)
Answers
solid : the molecules are tightly packed
liquid : the molecules have some space in them
gas : molecules can freely move around
Which word equation best describes the following formula equation:
4Al+3O2→2Al2O3?
A. Four molecules of aluminum and three molecules of diatomic oxygen react to form two molecules of aluminum oxide.
B. Four molecules of aluminum react with six molecules of oxide to form twelve molecules of aluminum oxide.
C. Two molecules of aluminum oxide reacts to form three molecules of oxygen and four molecules of aluminum.
D. Aluminum reacts with oxide to form aluminum oxide.
Answers
Option A is the correct answer that describes the equation best as compared to other statement.
Which statement best describes the equation?Four molecules of aluminum and three molecules of diatomic oxygen react to form two molecules of aluminum oxide is the statement best describes the equation because this statement have same number of molecules that reacted in the equation. We considered an equation correct that have wrong numbers in front of atoms.
4Al+3O2------------>2Al2O3
So we can conclude that option A is the correct answer that describes the equation best as compared to other statement.
Learn more about equation here: https://brainly.com/question/2972832
#SPJ1
How many moles of oxygen gas (02) are needed to completely react with 54.0 g of aluminum?
4A1+30₂2Al₂O3
54.0 g Al
1 mol Al
26.98 g Al
3 mol O₂
4 mol Al
[?] mol O₂
Answers
1.5 moles of [tex]O_{2}[/tex] gas
Reaction of Al with [tex]O_{2}[/tex] to form [tex]Al_{2} O_{3}[/tex] is given below...
2 Al + 1.5 [tex]O_{2}[/tex] → [tex]Al_{2} O_{3}[/tex]
Here, 2 moles of Aluminum reacts with 1.5 moles of [tex]O_{2}[/tex]
atomic weight of aluminum = 27 g / mole
so, 1 mole of aluminum contains 27 g
then how many moles are there if it has 54 g in it.
moles of aluminum in 54 g = 54/27 = 2 moles
As per the equation mentioned above,
2 moles of aluminum reacts with 1.5 moles of [tex]O_{2}[/tex].
∴1.5 moles of oxygen gas (02) are needed to completely react with 54.0 g of aluminum.
Learn more about moles here...
https://brainly.com/question/1427235
#SPJ10
An atom contains one proton, one electron, and one neutron. Which two particles are most similar in mass?
O the neutron and the electron
O the proton and the electron
O the proton and the neutron
O the neutron and the atom
Answers
Answer:
the pro on and the electron
3. Which nuclear radiation is similar to high energy X-rays?
beta
alpha
gamma
neutron
Answers
Answer: Gamma radiation
Explanation:
Gamma rays have high penetrating power, similar to high-energy X-rays.
Assertion (A): Naphthalene balls disappear with time without leaving any solid.
Reason (R): Solid converted to liquid is called sublimation.
a) Both A and R are true and R is the correct
explanation of A.
b) Both A and R are true but R is not the
correct explanation of A.
c) A is true but R is false. d) A is false but R is true.
Answers
Explanation:
a) Both A and R are true and R is the correct
explanation of A.
Answer:
[tex]\fbox {c) A is true but R is false.}[/tex]
Explanation:
Assertion (A):
⇒ Naphthalene balls disappear with time without leaving any solid.
⇒ True √
Reason (R):
⇒ Solid converted to liquid is called sublimation.
⇒ False ×
⇒ Solid converted to liquid is called melting
What is the oxidation state of Hg in Hg2Cl₂?
O A. +1
OB. -1
O C. +2
OD. -2
Answers
Answer:
+1
Explanation:
The oxidation state of Hg in Hg2Cl2 is +1. It has +1 state. 0=2Hg +2 (-1) Hg=+1. Mercury chloride (HgCl2) is considered as the dominant form of mercury in coal combustion flue gas. The oxidation state of an atom is the charge of this atom after ionic approximation of its heteronuclear bonds. The oxidation number is synonymous with the oxidation state. Determining oxidation numbers from the Lewis structure (Figure 1a) is even easier than deducing it from the molecular formula (Figure 1b). The oxidation number of each atom can be calculated by subtracting the sum of lone pairs and electrons it gains from bonds from the number of valence electrons. Bonds between atoms of the same element (homonuclear bonds) are always divided equally. When dealing with organic compounds and formulas with multiple atoms of the same element, it's easier to work with molecular formulas and average oxidation numbers (Figure 1d). Organic compounds can be written in such a way that anything that doesn't change before the first C-C bond is replaced with the abbreviation R (Figure 1c). Unlike radicals in organic molecules, R cannot be hydrogen. Since the electrons between two carbon atoms are evenly spread, the R group does not change the oxidation number of the carbon atom it's attached to.
source: www.chegg.com
Answer: O A. +1
Explanation: i took the test
