Larry uses the car for the first 5 slots (75 minutes) and returns it on time to avoid any fine. He then uses his bike for the remaining 2 slots, which takes 6 slots (3 times longer than using the car).
Therefore, in total, Larry uses the car for 5 slots and the bike for 6 slots, for a total of 11 slots.
On average, Larry expects to use the bike for (6/11) of his total slots. Since each bike delivery takes 3 times longer than a car delivery, we can say that Larry expects to spend 3 times as much time on the bike as he would in the car. Therefore, the average time he expects to spend on the bike (in terms of slots) is:
(6/11) * 3 = 1.636 slots
So, Larry expects to spend an average of 1.636 slots (or about 24.5 minutes) on the bike for each delivery.
To know more about average spending , refer here :
https://brainly.com/question/12763762#
#SPJ11
The figure below is not drawn to scale. The height of the triangle ABC is 2 cm shorter than its base. Find the area of the shaded portions
The area of the shaded portion in the given triangle of the attached diagram with given measurements is equal to 30 square centimeters.
In triangle ABC ,
Base 'AB' = 3+ 6 + 3
= 12cm
In the attached figure.
Let the perpendicular line passing through C intersect on AB at point D.
Height of the triangle ABC 'CD' = 12 -2
= 10 cm
Area of triangle ABC = ( 1/2) × AB × CD
= ( 1/ 2) × 12 × 10
= 60 cm²
Area of triangle excluding shaded portion = ( 1/2 ) × 6 × 10
= 30cm²
Area of the shaded portion
= Area of triangle ABC - Area of triangle excluding shaded portion
= 60 - 30
= 30 square centimeters.
Therefore, the area of the shaded portion of the triangle in the attached figure is equal to 30 square centimeters.
learn more about triangle here
brainly.com/question/13149571
#SPJ4
The above question is incomplete, the complete question is:
The figure below is not drawn to scale. The height of the triangle ABC is 2 cm shorter than its base. Find the area of the shaded portions.
Attached figure.
can someone help me answer #17 using square roots?
Answer:
13, 2x^2 - 98 = 0 ........ given
2x^2= 98 ........ take to tge left side no.98
x^2 = 98/2 = 49 ..... multiple both side by radical
x = √49 = 7 ........ simplify
17, 4x^2 + 10 = 11
4x^2 + 10 = 11 4x^2 = 11- 10 = 1
4x^2 + 10 = 11 4x^2 = 11- 10 = 1 x^2 = 1/4
4x^2 + 10 = 11 4x^2 = 11- 10 = 1 x^2 = 1/4 x = √1/4 = 1/2
what is the reference angle of 1062 degrees
Optimize: e-222-4xy-2y2 (1 point) Consider the optimization problem: Subject to 0x2 – 4xy + ly2 = 10 The method of Lagrange gives a system of three equations in three unknowns that you must solve to find the critical points. Write out those three equations (in any order). Use an l' in place of the usual .. =
To optimize the given function e - 222 - 4xy - 2y^2 subject to the constraint 0x^2 - 4xy + ly^2 = 10, we'll first set up the Lagrange function L(x, y, λ) as follows:
Langrange- L(x, y, λ) = e - 222 - 4xy - 2y^2 + λ(0x^2 - 4xy + ly^2 - 10)
Now, we'll get the partial derivatives of L with respect to x, y, and λ and set them equal to zero:
Step:1. ∂L/∂x = -4y - λ(-4y) = 0
Step:2. ∂L/∂y = -4x - 4y - 2λy = 0
Step:3. ∂L/∂λ = 0x^2 - 4xy + ly^2 - 10 = 0
These three equations represent the system of equations we need to solve to find the critical points. To reiterate, the equations are:
1. -4y + 4yλ = 0
2. -4x - 4y - 2λy = 0
3. -4xy + ly^2 - 10 = 0
Learn more about partial derivative here, https://brainly.com/question/4609414
#SPJ11
A triangle has side lengths of (7m – 2) centimeters, (9m - 5) centimeters, and
(6n – 1) centimeters. which expression represents the perimeter, in centimeters, of
the triangle?
The expression that represents the perimeter, in centimeters, of the triangle is (7m - 2) + (9m - 5) + (6n - 1).
How to find the perimeter of a triangle?The perimeter of a triangle is the sum of the lengths of its sides. Therefore, to find the perimeter of the triangle with side lengths (7m - 2) cm, (9m - 5) cm, and (6n - 1) cm, we need to add these lengths together.
Thus, the expression that represents the perimeter of the triangle is (7m - 2) cm + (9m - 5) cm + (6n - 1) cm.
Simplifying this expression, we get 16m + 6n - 8 cm, which is the final answer. Therefore, the perimeter of the triangle is 16m + 6n - 8 cm.
Learn more about triangle
brainly.com/question/2773823
#SPJ11
if you pay $ for a 20-year zero coupon bond with a face value of $, what is your annual compound rate of return?
The annual compound rate of return on this 20-year zero coupon bond is 6%. To calculate the annual compound rate of return, we need to use the following formula:
Annual Compound Rate of Return = (Face Value / Purchase Price)^(1/Number of Years) - 1
Here, the face value of the bond is $1000, the purchase price is $500, and the bond has a term of 20 years. Substituting these values in the above formula, we get:
Annual Compound Rate of Return = (1000/500)^(1/20) - 1
Simplifying this expression, we get:
Annual Compound Rate of Return = 1.06 - 1
Annual Compound Rate of Return = 0.06 or 6%
Therefore, the annual compound rate of return on this 20-year zero coupon bond is 6%.
Learn more about compound rate
https://brainly.com/question/29344169
#SPJ4
The dot plot shows the number of pencils each boy has at his desk in class.
+++ hhh
1 2 3 4 5 6
number of pencils at desk
find the median for the number of pencils.
The median for the number of pencils can be found by locating the middle value on the dot plot, which appears to be 3 pencils.
What is the middle value of the number of pencils on the dot plot?The dot plot displays the number of pencils each boy has at his desk in class. By locating the middle value of the data on the dot plot, the median number of pencils can be determined to be 3.
This indicates that half of the boys have 3 pencils or fewer, while the other half have 4 pencils or more.
The dot plot provides a visual representation of the distribution of the data and allows for easy identification of the median value.
Learn more about median
brainly.com/question/28060453
#SPJ11
2 Decide if each statement about r = 6 is true or false. Choose True or False for each statement. a. The equation has the same solution as fr = 3. True False
Answer:
Step-by-step explanation:
True
Sam has worn a green shirt o 10 of the last 20 days. Considering this data,how many times would you expect sam to wear a green shirt in the next 12 days?
PLEASE GIVE AN EXPLANATION STEP BY STEP
THANKS
Answer: 6
Step-by-step explanation:
So, he wears the shirt 10 out of 20 days.
10 days is half of 20 days.
This means he wears the shirt approximately half of the time, by the logic of 10/20 days.
So, now we apply this to 12 days.
What's half of 12? 6.
This means that he most likely wears the green shirt on 6 out of the 12 days.
Malia had 15 lb of birdseed. She fed her birds 5 lb of birdseed every day until all the birdseed was gone. For how many days did Malia feed the birdseed to her birds? A.20 days B. 3 days C.90 days D.75 days
Answer:
B
Step-by-step explanation:
15 pounds and 5 pounds per day so to figure out how many days you do division. The equation is 15÷5=3 so the answer is 3 days.
Your friend purchased a medium pizza for 10. 32 with a 30% off coupon what is the price of the pizza with out a coupon
The price of the medium pizza without the coupon is approximately $14.74.
To find the original price of the pizza without the coupon, we can use the following formula:
Original Price = Discounted Price / (1 - Discount Percentage)
In this case, the discounted price is $10.32 and the discount percentage is 30% or 0.3. Plugging the values into the formula:
Original Price = $10.32 / (1 - 0.3)
Original Price = $10.32 / 0.7
Original Price ≈ $14.74
So, the price of the medium pizza without the coupon is approximately $14.74.
To learn more about coupon, refer below:
https://brainly.com/question/30177801
#SPJ11
The vector
u
u has magnitude
2
2 and direction
5
5
∘. 55
∘. If vector
v
=
−
2
u
,
v=−2u, then what is the magnitude and direction of vector
v
?
v? Write your direction in degrees in the interval
0
∘
≤
θ
<
36
0
∘. 0
∘
≤θ<
The magnitude of vector v is 4 and the direction is 125 degrees.
Given that vector u has a magnitude of 2 and a direction of 55 degrees, we can determine the magnitude and direction of vector v.
To find the magnitude of vector v, we can use the equation:
|v| = |-2u|
Since u has a magnitude of 2, we can substitute it into the equation:
|v| = |-2 * 2|
|v| = |-4|
|v| = 4
The magnitude of vector v is 4.
To find the direction of vector v, we can note that multiplying a vector by -1 (in this case, multiplying u by -2) reverses its direction. So the direction of v is the exact opposite of the direction of u.
Since the direction of u is 55 degrees, the direction of v is 55 degrees in the opposite direction. In the interval of 0 degrees ≤ θ < 360 degrees, the direction of v can be expressed as:
θ = 180 - 55
θ = 125 degrees
To learn more about vector
https://brainly.com/question/28197250
#SPJ11
A sphere has a radius of 12 cm. a cylinder has the same radius and has a height of 12 cm. what is the difference in their volumes in cubic cm? record your answer to the nearest hundredth. use 3.14
The difference in volumes between the sphere and the cylinder is approximately 3619.14 cubic cm.
We need to find the difference in volumes between a sphere and a cylinder with the same radius (12 cm) and the cylinder has a height of 12 cm.
Step 1: Find the volume of the sphere.
The formula for the volume of a sphere is V_sphere = (4/3)πr³.
V_sphere = (4/3) × 3.14 × (12 cm)³
V_sphere = (4/3) × 3.14 × 1728 cm³
V_sphere ≈ 9047.78 cm³
Step 2: Find the volume of the cylinder.
The formula for the volume of a cylinder is V_cylinder = πr²h.
V_cylinder = 3.14 × (12 cm)² × 12 cm
V_cylinder = 3.14 × 144 cm² × 12 cm
V_cylinder ≈ 5428.64 cm³
Step 3: Find the difference in volumes.
Difference = V_sphere - V_cylinder
Difference = 9047.78 cm³ - 5428.64 cm³
Difference ≈ 3619.14 cm³
The difference in volumes between the sphere and the cylinder is approximately 3619.14 cubic cm.
Learn more about volume,
https://brainly.com/question/27710307
#SPJ11
A random sample of 18 observations taken from a normally distributed population produced the following data:
28. 4 27. 3 25. 5 25. 5 31. 1 23. 0 26. 3 24. 6 28. 4
37. 2 23. 9 28. 7 27. 9 25. 1 27. 2 25. 3 22. 6 22. 7
What is the point estimate of μ?
Make a 99% confidence interval for μ.
What is the margin of error of estimate for μ in part b?
Point estimate of μ [tex]26.15[/tex]
99% confidence interval: [tex](24.213, 28.087)[/tex]
Margin of error:[tex]1.437[/tex]
How to estimate μ and create a 99% confidence interval ?The point estimate of (population mean) is calculated by finding the sample mean , which is the average of the given sample data. Adding up all the observations and dividing by the sample size (18), we get:
To make a 99% confidence interval for we can use the t-distribution and the sample mean. Since the sample size is 18, we have (18 - 1) = 17 degrees of freedom. Using a t-distribution table or a calculator, we find the critical value for a 99% confidence level and 17 degrees of freedom to be approximately 2.898.
Next, we calculate the standard error (SE) using the sample standard deviation (s) divided by the square root of the sample size .Assuming the population standard deviation is unknown, we estimate it using the sample standard deviation, which is approximately 3.858.
Learn more about population
brainly.com/question/15889243
#SPJ11
u = 28.8
The 99% confidence interval for μ is (27.01, 30.59).
How to solve the data28.4 + 27.3 + 25.5 + 25.5 + 31.1 + 23.0 + 26.3 + 24.6 + 28.4 + 37.2 + 23.9 + 28.7 + 27.9 + 25.1 + 27.2 + 25.3 + 22.6 + 22.7 = 518.3
The sample mean (or the point estimate of μ) is:
518.3 / 18 = 28.8
Calculate each data point's deviation from the mean, square it, and then sum up these values.
(28.4-28.8)² + (27.3-28.8)² + (25.5-28.8)² + (25.5-28.8)² + (31.1-28.8)² + (23.0-28.8)² + (26.3-28.8)² + (24.6-28.8)² + (28.4-28.8)² + (37.2-28.8)² + (23.9-28.8)² + (28.7-28.8)² + (27.9-28.8)² + (25.1-28.8)² + (27.2-28.8)² + (25.3-28.8)² + (22.6-28.8)² + (22.7-28.8)²
= 116.4
Divide by (n - 1), where n is the number of observations. In this case, n = 18, so n - 1 = 17.
So, the variance (s²) is 116.4 / 17 = 6.85 (approximately)
s = √6.85 = 2.62
CI = x ± (t * (s/√n))
CI = 28.8 ± (2.898 * (2.62/√18))
CI = 28.8 ± 1.79
So, the 99% confidence interval for μ is (27.01, 30.59).
Read more on confidence interval here https://brainly.com/question/15712887
#SPJ4
Evaluate the integral 4 cos x2 dx dy dz, 2y by changing the order of integration in an appropriate way. CILLS
To evaluate the integral 4 cos x^2 dx dy dz, 2y by changing the order of integration, we first need to determine the limits of integration.
Integrating with respect to x first, we have:
∫∫∫ 4 cos x^2 dx dy dz, 2y
= ∫∫ [2 sin x^2]y=0 to y dz, 2y
= ∫ [2 sin x^2]z=0 to z dz, 2y
= 2y ∫ [sin x^2]z=0 to z dz
Next, integrating with respect to z, we have:
2y ∫ [sin x^2]z=0 to z dz
= 2y [cos x^2]z=0 to z
= 2y [cos z^2 - 1]
Finally, integrating with respect to y, we have:
∫∫∫ 4 cos x^2 dx dy dz, 2y
= ∫∫ 2y [cos z^2 - 1] dy dz
= ∫ [y^2(cos z^2 - 1)]z=0 to z dz
= ∫ y^2(cos z^2 - 1) dz
Therefore, we have changed the order of integration from dx dy dz, 2y to dz dy dx, and the new limits of integration are:
0 ≤ z ≤ √(π/2)
0 ≤ y ≤ √(π/2 - z^2)
0 ≤ x ≤ √(π/2 - y^2 - z^2)
We can now evaluate the integral using these new limits and the equation we derived earlier:
∫∫∫ 4 cos x^2 dx dy dz, 2y
= ∫∫∫ 4 cos x^2 dz dy dx, 2y
= ∫ from 0 to √(π/2) ∫ from 0 to √(π/2 - z^2) ∫ from 0 to √(π/2 - y^2 - z^2) y^2(cos z^2 - 1) dx dy dz
= -4/3π
Therefore, the value of the integral is -4/3π.
To evaluate the integral by changing the order of integration, first, we need to rewrite the given integral in the correct notation. Unfortunately, the provided integral seems to have some errors or missing information, making it difficult to give a complete answer.
Please provide the correct integral and the limits of integration for each variable (x, y, and z) so I can assist you better.
To know more about Integral click here
brainly.com/question/18125359
#SPJ11
Suppose you have a bag of m&ms 4 green 6 yellow 7 purple 3 red. what is the probability you select a brown m&m
The probability of selecting a brown M&M from this bag is 0.
Since there are no brown M&Ms mentioned in your bag, the probability of selecting a brown M&M is 0. In probability terms, we can express this as:
Probability of selecting a brown M&M = Number of brown M&Ms / Total number of M&Ms
There are 0 brown M&Ms, and there are a total of 4 green + 6 yellow + 7 purple + 3 red = 20 M&Ms in the bag. So the probability is:
Probability = 0 / 20 = 0
Thus, the probability of selecting a brown M&M from this bag is 0, meaning it's impossible with the given information.
Learn more about probability,
https://brainly.com/question/24756209
#SPJ11
Find the measure of each labeled angles in the rhombus below:
The measure of each labeled angles in the rhombus are ∠1 = 49°, ∠2 = 90°, ∠3 = 49° and ∠4 = 41°
Finding the measure of each labeled angles in the rhombusFrom the question, we have the following parameters that can be used in our computation:
The rhombus
By corresponding angles, we have
∠3 = 49°
∠1 = 49°
The diagonals of a rhombus bisect each other at right angles
So, we have
∠2 = 90°
Ths sum fo angles in a triangle is 180
So, we have
∠4 = 180 - 90 - 49°
Evaluate
∠4 = 41°
Hence, the measure of the angles in the rhombus are ∠1 = 49°, ∠2 = 90°, ∠3 = 49° and ∠4 = 41°
Read more about rhombus at
https://brainly.com/question/29713304
#SPJ1
Work out without a calculator.
√
45
×
√
1
20
Answer:
3
√
10
√
5
Step-by-step explanation:
You can only make four different cuboids with 12 cubes complete the table to show the dimensions
Each cuboid has a total of 12 cubes, but they have different shapes and sizes. The table is attached below.
What is the cube?A cube is a three-dimensional geometric shape that has six equal square faces, 12 equal edges, and eight vertices (corners). All the angles between the faces and edges of a cube are right angles (90 degrees), and all the edges are of equal length. A cube is a special type of rectangular prism where all the sides are equal in length, making it a regular polyhedron.
Sure, here's a table showing the possible dimensions of the four different cuboids that can be made with 12 cubes:
Cuboid Length Width Height
A 1 2 6
B 1 3 4
C 2 2 3
D 1 1 12
Note that the dimensions are given in terms of the number of cubes in each direction. For example, cuboid A has a length of 1 cube, a width of 2 cubes, and a height of 6 cubes.
Therefore, Each cuboid has a total of 12 cubes, but they have different shapes and sizes.
To learn more about Cubes at
https://brainly.com/question/28134860
#SPJ4
the figure above, AB is parallel to DE; (ABC = 800 and (CDE = 280. Find (DCB.(3mks)
Answer:
Step-by-step explanation:
Since AB is parallel to DE, we know that:
(ABC + BCD) = (CDE + EDC)
Substituting the given values, we get:
800 + BCD = 280 + EDC
Simplifying, we get:
BCD = EDC - 520
We also know that:
(BCD + CDE + DCE) = 180
Substituting BCD = EDC - 520 and CDE = 280, we get:
(EDC - 520 + 280 + DCE) = 180
Simplifying, we get:
EDC + DCE - 240 = 0
EDC + DCE = 240
Now we can solve for DCE in terms of BCD:
DCE = 240 - EDC
DCE = 240 - (BCD + 520)
DCE = 760 - BCD
Substituting this expression for DCE into the equation (BCD + CDE + DCE) = 180, we get:
BCD + 280 + (760 - BCD) = 180
Simplifying, we get:
1040 - BCD = 180
BCD = 860
Therefore, (DCB) = 180 - (BCD + CDE) = 180 - (860 + 280) = -960. However, since angles cannot be negative, we can add 360 degrees to this value to get:
(DCB) = -960 + 360 = -600
Therefore, (DCB) = -600 degrees.
What is 7-12 problems. The image is attached.
The number of bases, faces, edges and vertices are;
7. 2, 4, 6, 6
8. 6, 5, 10, 10
9. 1, 4, 5, 5
10. 1, 5, 7 , 7
11. 1, 5, 7, 7
12. 1, 3, 4 , 4
How to determine the numberTo determine the number, we need to take the following into considerations;
An edge is a line segment that is between faces. Vertices are angular corners where two lines or edges and more meet between faces.A face is any of the sole flat surfaces of a solid objectBase is the surface the shape stands onLearn about edges at: https://brainly.com/question/22735873
#SPJ1
"Reduce the quadratic form 2yz^2+2xz+2xy to canonical form by an
orthogonal transformation and also find rank, index and
signature."
To reduce the quadratic form 2yz^2+2xz+2xy to canonical form, we need to complete the square.
First, we factor out the coefficient of z^2 from the yz^2 term:
2yz^2 = 2z(yz)
Next, we add and subtract the square of half the coefficient of z from the resulting expression:
2z(yz + (x/y)^2 - (x/y)^2)
= 2z((y + x/y)^2/4 - (x/y)^2)
= z(y + x/y)^2/2 - zx^2/y
Now, we can see that the quadratic form can be written in the canonical form:
q(x,y,z) = (y + x/y)^2/2 - x^2/y
To find the rank, we need to count the number of non-zero eigenvalues. In this case, we have two non-zero eigenvalues, so the rank is 2.
To find the index, we need to count the number of positive, negative, and zero eigenvalues. We can see that there is one positive eigenvalue and one negative eigenvalue, so the index is 1.
Finally, to find the signature, we subtract the index from the rank. In this case, the signature is 1.
To reduce the quadratic form 2yz^2 + 2xz + 2xy to canonical form by an orthogonal transformation, we first find the matrix representation of the form. The given quadratic form can be written as Q = [x, y, z] * A * [x, y, z]^T, where A is a symmetric matrix:
A = | 0 1 1 |
| 1 0 1 |
| 1 1 2 |
Now, we find the eigenvalues and eigenvectors of A. The eigenvalues are λ₁ = 3, λ₂ = -1, and λ₃ = 0, with corresponding eigenvectors:
v₁ = [1, 1, 1]
v₂ = [-1, 1, 0]
v₃ = [-1, -1, 2]
Normalize the eigenvectors to form an orthogonal matrix P:
P = | 1/√3 1/√2 -1/√6 |
| 1/√3 -1/√2 -1/√6 |
| 1/√3 0 2/√6 |
Now, we can transform A to its canonical form using the orthogonal matrix P:
D = P^T * A * P
D = | 3 0 0 |
| 0 -1 0 |
| 0 0 0 |
So, the canonical form of the quadratic form is:
Q canonical = 3x'^2 - y'^2
The rank of the quadratic form is the number of non-zero eigenvalues in the diagonal matrix D. In this case, the rank is 2.
The index of the quadratic form is the number of positive eigenvalues in D, which is 1 in this case.
The signature of the quadratic form is the difference between the number of positive and negative eigenvalues in D. In this case, the signature is 1 - 1 = 0.
learn more about quadratic form here: brainly.com/question/9929333
#SPJ11
An exclusive Yoghurt manufacturer sells 4,000 gallons per month at a price of GHS 40 each. When the price is reduced to GHS 30 sales increase to 6,000 gallons per month.
a. Calculate the price elasticity of demand for the Yoghurts over this price range.
b. Is demand elastic, unit elastic or inelastic?
c. Calculate the change in revenue due to the change in price
a. The price elasticity of demand for the Yoghurts over this price range is -2.5
b. The demand is elastic
c. The change in revenue due to the change in price is GHS 20,000
a. The price elasticity of demand is given by the formula:
Price elasticity of demand = (Percentage change in quantity demanded) / (Percentage change in price)
The percentage change in quantity demanded is (6000 - 4000) / 4000 * 100% = 50%
The percentage change in price is (30 - 40) / 40 * 100% = -20%
Therefore, the price elasticity of demand = 50% / (-20%) = -2.5
b. Since the price elasticity of demand is greater than 1,-2.5. This means that the percentage change in quantity demanded is greater than the percentage change in price.
c. The revenue is given by the formula:
Revenue = Price x Quantity
At a price of GHS 40, the revenue is 4000 x 40 = GHS 160,000
At a price of GHS 30, the revenue is 6000 x 30 = GHS 180,000
Therefore, the change in revenue is GHS 20,000, which is an increase of 12.5%.
Learn more about elasticity at https://brainly.com/question/30910899
#SPJ11
A normal distribution curve, where x = 70 and o = 15,
was created by a teacher using her students' grades.
What information about their performances can be obtained by analyzing the curve?
The normal distribution curve gives useful information regarding the distribution of students' grades, such as the average grade, the dispersion of grades, the likelihood of receiving a specific grade, and the presence of any outliers.
Obtainable Information's from the Distribution Curve?The normal distribution curve generated by the educator offers multiple insights into the distribution of academic achievement among her pupils. The analysis of the curve yields various informative data such as:
The parameter of central tendency for this distribution is represented by the mean, denoted as x=70, signifying that the students' mean grade is at 70.The normal distribution's degree of dispersion is represented by the standard deviation, denoted by o=15 in this context, conveying the extent of variability among grades. In this particular instance, the presence of a higher standard deviation denotes a greater degree of variability in the distribution of grades from the central tendency.Probability theory allows for the utilization of the normal distribution curve to determine the likelihood of a student achieving a particular grade. An illustration of this notion can be depicted by estimating the likelihood of an individual receiving a marks within the range of 55 and 85 through the computation of the region beneath the curve that occupies those particular values.The utilization of the normal distribution in statistical analysis is instrumental in recognizing any possible outliers within the dataset. An outlier refers to a data point that deviates considerably from the rest of the data. In the present scenario, grades whose values extend beyond two standard deviations from the mean, calculated as 70 + 215 = 100 or 70 - 215 = 40, may be considered as outliers.Learn more about distribution curve here: https://brainly.com/question/23418254
#SPJ1
Write the following sets of identities
a) minor- to -minor b) reciprocal
c. )CFCs d) pythgurean
*right answers only don't answer unless you 100%*
The set builder form of the sets are
1) { | = ², where is a positive integer between 1 and 9}
2) { | = 5ⁿ, where n is a non-negative integer less than or equal to 5}
3) { | = 3, where is a positive integer between 1 and 6}
In set-builder notation, we use the curly brackets {} to enclose the elements of a set, and a rule or condition to define the elements that belong to the set.
Let's look at each of the sets given and express them in set-builder form:
{1, 4, 9,……..81}
This set contains the perfect squares of the numbers 1 to 9. To express it in set-builder notation, we can use the following rule:
{ | = ², where is a positive integer between 1 and 9}
{1, 5, 25, 125, 625, 3125}
This set contains the powers of 5, starting from 5⁰=1 up to 5⁵=3125. To express it in set-builder notation, we can use the following rule:
{ | = 5ⁿ, where n is a non-negative integer less than or equal to 5}
{3, 6, 9, 12, 15, 18}
This set contains the multiples of 3, from 3 to 18. To express it in set-builder notation, we can use the following rule:
{ | = 3, where is a positive integer between 1 and 6}
In this rule, we multiply 3 by the positive integers 1 to 6 to obtain the elements of the set.
To know more about set builder here
https://brainly.com/question/28276299
#SPJ4
Complete Question:
Express the following sets in set-builder form.
1. {1, 4, 9,……..81}
2. {1, 5, 25, 125, 625, 3125}
3. {3, 6, 9, 12, 15, 18}
The table shows the part of the students in
each grade that participated in a sport this
year. Which grade had the greatest rate of participation? The least?
we see that the greatest rate of participation was in Grade 8, and the least rate of participation was in Grade 6.
How to find the grade had the greatest rate of participation?To compare the rates of participation in sports among the three grades, we can convert each percentage or fraction to a decimal and then compare the values.
Grade 6: 0.872
Grade 7: 0.87 (87% converted to decimal)
Grade 8: 0.875 (7/8 converted to decimal)
Therefore, we see that the greatest rate of participation was in Grade 8, and the least rate of participation was in Grade 6.
Answer:
Grade 8 had the greatest rate of participation.
Grade 6 had the least rate of participation.
To know more about Percentage visit:
brainly.com/question/16797504
#SPJ1
helpppp me please……….
Answer:
45°
Step-by-step explanation:
sin∠U = 5√2 / 10 = √2/2
m∠U = sin⁻¹(√2/2) = 45°
Given square ertn, what is the length of nt?
In the given square ERTN, the length of the side NT is found to be equal to 25.
The square ERTN has ER = 5x and RT = 10x - 25. Because it is a square, the sides will be equal in magnitude. So, we can write,
Length of ER = Length of RT
5x = 10x - 25
5x = 25
x = 25/5
x = 5
So, the length of ER will be 5(5) = 25 and the length of RT will be 10(5)-25 = 25.
So, finally the length of NT would also be equal to 25.
To know more about squares, visit,
https://brainly.com/question/822130
#SPJ4
A prospector graphed the locations of gold vein and all of the gold dust strikes in the vicinity. She positioned the gold vein at (-3,9) and the farthest gold dust strikes at (33,9). If each unit on the graph represents 1 mile then how far away from the gold vein is the farthest gold dust strike?
Answer:
Step-by-step explanation:
The gold vein is at (-3,9) and the farthest gold dust strike is at (33,9). The distance between the two points is 36 miles.
A spring gun at ground level fires a golf ball at an angle of 45 degrees. The ball lands 10 m away.
a) What was the ball's initial speed?
b) For the same initial speed, find the two firing angles that make the range 6 m.
Recall that the Ideal Projectile Motion Equation is
r=(vo*cos(theta))ti+((vo*sin(theta)t-1/2*g*t^2)j.
Answer: a) vo=sqrt(10g)
b) theta=1/2*arcsin(3/5),
theta=pi-1/2*arcsin(3/5).
And is arcsin the same thing as sin^-1?
Yes, arcsin and sin^-1 both represent the inverse sine function.
process of finding inital speed:
a) To find the ball's initial speed, we can use the range formula for projectile motion:
R = (v₀² * sin(2θ)) / g
where R is the range (10 m),
v₀ is the initial speed,
θ is the launch angle (45 degrees), and
g is the acceleration due to gravity (9.81 m/s²).
We can solve for v₀:
10 = (v₀² * sin(90)) / 9.81
10 = (v₀²) / 9.81
v₀² = 10 * 9.81
v₀ = sqrt(10 * 9.81)
The ball's initial speed is sqrt(10 * 9.81) m/s.
b) For the same initial speed, we can find the two firing angles that make the range 6 m:
6 = (v₀² * sin(2θ)) / 9.81
Now, we can use the initial speed found in part (a):
6 = (10 * 9.81 * sin(2θ)) / 9.81
0.6 = sin(2θ)
To find the two angles, we can use the arcsin function:
θ₁ = 1/2 * arcsin(0.6)
θ₂ = π - 1/2 * arcsin(0.6)
The two firing angles are 1/2 * arcsin(0.6) and π - 1/2 * arcsin(0.6).Yes, arcsin is the same as sin^(-1);
To know more about sin functions:
https://brainly.com/question/24500215
#SPJ11
