Complete combustion of a 0.0200 mol sample of a hydrocarbon, CxHy, gives 4.032 L of CO2 at STP and 3.602 g of H2O.
(a) What is the molecular formula of the hydrocarbon? (b) What is the empirical formula of the hydrocarbon?

At some constant temperature, the equilibrium constant for the reaction below is Kc = .76. An empty 1.00L flask is charged with 2.00 mol carbon tetrachloride and then allowed to reach equilibrium. CCl4(g) ⇌ C (s) + 2 Cl2(g)

a. To find the fraction of the reactant (CCl4) remaining at equilibrium, we can start by determining the initial concentration of CCl4:
Initial concentration of CCl4 = moles/volume = 2.00 mol / 1.00 L = 2.00 M

Let x be the change in concentration of CCl4 at equilibrium. Then, the equilibrium concentrations are:
[CCl4] = 2.00 - x
[Cl2] = 2x
The equilibrium constant expression is given by:
Kc = [Cl2]^2 / [CCl4]
Plugging in the given Kc value (0.76) and the equilibrium concentrations:
0.76 = (2x)^2 / (2.00 - x)

Now, you can solve for x. The fraction of the reactant remaining at equilibrium is (2.00 - x) / 2.00.

b. To find the molarity of chlorine gas (Cl2) at equilibrium, you can use the value of x obtained in part (a). The molarity of Cl2 is equal to 2x.

For more questions on: temperature

https://brainly.com/question/27944554

#SPJ11

Answer:

A position-time graph can support the statement that a positive slope results when an individual is moving away from the origin. This is because a positive slope on a position-time graph represents a positive velocity, which means that the object is moving in a positive direction (away from the origin). Conversely, a negative slope would indicate that the object is moving in a negative direction (towards the origin).

Option A and B are incorrect. A negative slope on a position-time graph indicates that the object is moving towards the origin, not away from it. A horizontal line on a position-time graph indicates that the object is not moving at all (velocity is zero), not moving at a non-zero velocity.

Option D is also incorrect. The speed of an individual can be determined from a position-time graph by calculating the slope of the graph at any point, which gives the velocity (speed and direction) of the individual at that point..

mark me brilliant

Answer: 285.63g of MgCl2.

Explanation:

Very easy stiochemistry question. Use the dimensional analysis. For example 1 m x 100 cm / 1m and meters get canceled out and 1 m is 100 cm.

For the question, start with the given things. You know that it was started with 72.8 grams of magnesium. Convert it to molar mass (to use moles for comparison), and then find the mass of mg.

The second-law efficiency of this freezer is 94.7%.

The second-law efficiency of a refrigerator or freezer is described as as the ratio of the desired cooling effect  which is the heat removed from the cold reservoir) to the energy input required to achieve this cooling effect.

The second-law efficiency of a refrigerator  formula is

η = Qc / W

we have the equation as

Qh = mCΔT = Qc

Tc = -7°C = 266 K

Th = 25°C = 298 K  and

W = Qh / (1 - Tc/Th) = Qc / (1 - Tc/Th) = 3.3 W

we have found  Qc = 3.125

W  = 3.3 W

we then substitute into the  second-law efficiency formula:

η = Qc / Wmin

η= 3.125 W / 3.3 W

η= 0.947 or 94.7%

Learn more about second-law efficiency at:

https://brainly.com/question/15025185

#SPJ1

The enthalpy of the reaction is -94.1308 kJ/mol of the metal.

First, we need to calculate the amount of heat absorbed by the water in the calorimeter. We can use the formula:

q = m × C × ΔT

where q is the amount of heat absorbed by the water, m is the mass of the water, C is the specific heat capacity of water, and ΔT is the temperature change of the water.

q = 100 g × 4.184 J/g-°C × 3.81°C = 1601.304 J

Next, we need to calculate the amount of heat released by the reaction. We can use the formula:

q = n × ΔH

where q is the amount of heat released, n is the number of moles of the metal, and ΔH is the enthalpy change of the reaction.

We know that 0.017 moles of metal reacted, and we can assume that all the heat released by the reaction was absorbed by the water in the calorimeter.

Therefore:

q = n × ΔH

1601.304 J = 0.017 mol × ΔH

ΔH = 1601.304 J / 0.017 mol = 94130.8235 J/mol

Finally, we need to convert the answer from joules to kilojoules:

ΔH = 94130.8235 J/mol / 1000 J/kJ = -94.1308 kJ/mol

Learn more about enthalpy, here:

https://brainly.com/question/16720480

#SPJ1

Answer:

Explanation:

We can use the formula:

q = mcΔT

where q is the heat absorbed, m is the mass, c is the specific heat, and ΔT is the change in temperature.

Given:
specific heat of iron (c) = 0.449 J/g°C
initial temperature (T1) = 24.0°C
final temperature (T2) = 82.1°C
heat absorbed (q) = 948.0 J

Substituting the given values into the formula, we get:

q = mcΔT
948.0 J = m(0.449 J/g°C)(82.1°C - 24.0°C)
948.0 J = m(0.449 J/g°C)(58.1°C)
m = 948.0 J ÷ (0.449 J/g°C × 58.1°C)
m = 33.1 g

Therefore, the mass of the iron piece is 33.1 g (to three significant figures)

The primary difficulties in creating a low-cost, portable water purification system include assuring efficient pollution removal, compact design, durability etc.

In order to create a low-cost, portable water purification system, engineers must overcome several main obstacles and challenges, including: ensuring the removal of contaminants effectively; designing a compact and lightweight system; guaranteeing durability and reliability in harsh environments; providing an affordable, sustainable power source; and addressing cultural and social factors that may affect user acceptance and adoption.

To know more about water purification system, visit,

https://brainly.com/question/11523514

#SPJ1

the original temperature of the h ot iron bar was 327.9°C.

We can use the specific heat of iron to do this:

Q1 = m1 * C1 * (Ti - 32.8°C)

Q1 = 408 g * 0.45 J/g °C * (Ti - 32.8°C)

Q1 = 183.6 J/g °C * (Ti - 32.8°C)

where m1 is the mass of the iron bar, C1 is the specific heat of iron, and Ti is the initial temperature of the iron bar.

Next, let's calculate the heat gained by the cold water when it is heated from 20.0°C to 32.8°C:

Q2 = m2 * C2 * (32.8°C - 20.0°C)

Q2 = 1000 g * 4.184 J/g °C * (32.8°C - 20.0°C)

Q2 = 52272 J

where m2 is the mass of the water, C2 is the specific heat of water.

Since the energy lost by the iron bar is gained by the water, we can set Q1 equal to Q2:

Q1 = Q2

183.6 J/g °C * (Ti - 32.8°C) = 52272 J

Now, let's solve for Ti:

183.6 J/g °C * Ti - 60236.8 J = 0

183.6 J/g °C * Ti = 60236.8 J

Ti = 327.9°C

Therefore, the original temperature of the h ot iron bar was 327.9°C.

learn more about temperature here

https://brainly.com/question/26866637

#SPJ1

1) Bromination of propylene to form 2-bromopropane using NBS and a Lewis acid catalyst.

Bromination is a chemical process in which bromine is added to a molecule. This can be done by either direct substitution or as a substitution reaction, allowing for the addition of one or more bromine atoms to the molecule. Bromination is a commonly used organic reaction, particularly in the laboratory, and can be used to alter the properties of a compound. It can also be used to produce a wide range of products, including aromatics and halogenated compounds. Bromination is particularly useful in pharmaceutical synthesis, as the products of this reaction often have desirable bioactivity.

2) Reduction of 2-bromopropane to 2-propanol using NaBH₄
3) Reaction of 2-propanol with phosphorus tribromide to form 2-bromopropanol
4) Alkylation of 2-bromopropanol with methyl iodide to form 2-bromopropyl methyl ether
5) Reduction of 2-bromopropyl methyl ether to 2-methoxypropane using NaBH₄
6) Reaction of 2-methoxypropane with phosphorus tribromide to form 2-bromo-2-methoxypropane
7) Reduction of 2-bromo-2-methoxypropane to Compound X using NaBH₄

To learn more about Bromination
https://brainly.com/question/24202507
#SPJ1

The theoretical yield of sodium sulfate, Na₂SO₄, formed from the reaction of 4.9 g of sulfuric acid, H₂SO₄ and 5.0 g of sodium hydroxide, NaOH is 7.1 g

First, we shall determine the limiting reactant. This is shown below:

H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O

From the balanced equation above,

98 g of H₂SO₄ reacted with 80 g of NaOH

Therefore,

4.9 g of H₂SO₄ will react with = (4.9 × 80) / 98 = 4 g of NaOH

From the above calculation, we can see that only 4 g of NaOH out of 5 g is needed to react with 4.9 g H₂SO₄.

Thus, the limiting reactant is H₂SO₄

Finally, we shall determine theoretical yield of sodium sulfate, Na₂SO₄ formed. Details below:

H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O

From the balanced equation above,

98 g of H₂SO₄ reacted to produce 142 g of Na₂SO₄

Therefore,

4.9 g of H₂SO₄ will react to produce = (4.9 × 142) / 98 = 7.1 g of Na₂SO₄

Thus, the theoretical yield of sodium sulfate, Na₂SO₄ formed is 7.1 g

Learn more about theoretical yield:

https://brainly.com/question/30945491

#SPJ1

The reaction is second order with a rate constant of 0.043 mol/l min.

For CA = 0.1 mol/l, -rA = 0.1 mol/l min

For CA = 0.2 mol/l, -rA = 0.3 mol/l min

For CA = 0.3 mol/l, -rA = 0.5 mol/l min

For CA = 0.4 mol/l, -rA = 0.6 mol/l min

The slope of this line is equal to the order of the reaction (n), and the y-intercept is ln(k).

Slope = (0.6931 - (-2.3026)) / (0.3010 - (-0.9163)) = 1.929

ln(k) = -2.3026 + 1.929 * (-0.3010)

ln(k) = -3.1504

k = e^(-3.1504) = 0.043 mol/l min

The reaction is second order with a rate constant of 0.043 mol/l min.

Learn more about reaction on

https://brainly.com/question/11231920

#SPJ1

Answer:

we need to know the definitions of the two types of mutations:

Looking at the definitions, we can see that a chromosomal mutation can affect many genes at once, while a gene mutation can affect only one or a few nucleotides. Therefore, a chromosomal mutation could have the most drastic effect on a gene, because it could alter or delete an entire gene or multiple genes, resulting in major changes in the phenotype or function of an organism. A gene mutation could also have significant effects on a gene, but it could also be silent or minor depending on the location and type of the mutation. Therefore, the answer is a chromosomal mutation. One possible way to back up this choice is to give an example of a chromosomal mutation that causes a genetic disorder, such as Down syndrome or Turner syndrome.

Answer:

Since that means that we have 0.223 moles of PbCl2 in 1000mL of solution.

Also since mole ratio of the ions Pb2+:Cl- is 1:2

Thus, moles of Pb2+ = 0.223moles

concentration of Pb2+= 0.223M

Moles of Cl- = 2x0.223 moles

Concentration of Cl- = 0.446M

Explanation:

Before the chairs touch, the temperature of the bottom chair is lower than the temperature of the top chair, this is because the molecules in the bottom chair are in contact with a cooler surface.

After the chairs have been touching for a while, the heat will begin to transfer from the top chair to the bottom chair through a process called conduction. This will continue until the temperature of the two chairs equalizes, at which point there will be no more net heat transfer between them.

The final temperature of both chairs will be somewhere between the initial temperatures of the two chairs, and will depend on factors such as the thermal conductivity of the material, the size of the chairs, and the duration of the contact.

To know more about the Molecules, here

https://brainly.com/question/2114821

#SPJ1

The correct ratio of components is:  For every 3 moles of carbon dioxide produced, 5 moles of oxygen react.

This ratio can be derived directly from the balanced chemical equation:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

The balanced equation shows that for every 3 moles of carbon dioxide produced, 5 moles of oxygen are required. This means that if we have a certain amount of propane, we need to use this ratio to determine the amount of oxygen needed for the reaction. Similarly, if we have a certain amount of oxygen, we can use this ratio to calculate the amount of carbon dioxide that will be produced.

It is important to note that the other ratios provided in the question are incorrect because they do not match the coefficients in the balanced chemical equation.

Therefore, the correct option is: for every 3 moles of carbon dioxide produced, 5 moles of oxygen react.

To learn more about balanced equation here

https://brainly.com/question/31242898

#SPJ1

The amount of heat evolved when 25 moles of Sulfur is burned in excess oxygen is -74000 kJ.

The balanced reaction is given that is:

[tex]S_8(s) + 8 O_2(g) \rightarrow 8 SO_2(g)[/tex]

We can see that 1 mole of [tex]S_8[/tex] reacts with 8 moles of [tex]O_2[/tex] to produce 8 moles of [tex]So_2[/tex].

If 25.0 moles of [tex]S_8[/tex] reacts with excess Oxygen, then the amount of [tex]O_2[/tex] which is required in the reaction will be:

8 moles [tex]O_2[/tex] / 1 mole S8 × 25.0 moles S8 = 200 moles [tex]O_2[/tex]

We can use the enthalpy change and calculate the amount of heat evolved:

[tex]\Delta H[/tex] = -2368 kJ/ 8 moles [tex]SO_2[/tex]

The heat evolved = [tex]\Delta H[/tex] × moles of [tex]SO_2[/tex] produced

Moles of [tex]SO_2[/tex] produced =  8 moles [tex]SO_2[/tex] / 1 mole [tex]S_8[/tex] × 25.0 moles [tex]S_8[/tex]

= 200 moles [tex]SO_2[/tex].

Therefore, Heat evolved= -2368 kJ/ 8 moles [tex]SO_2[/tex] × 200 moles [tex]SO_2[/tex]

= -74000 kJ

The amount of heat evolved when 25 moles of Sulfur is burned in excess oxygen is -74000 kJ, the negative sign here indicates that the reaction is exothermic.

Learn more about the enthalpy change at:

https://brainly.com/question/28873088

#SPJ1

Jeremiah can arrange the materials in the following way to create a model that shows the processes by which water is cycled from a lake into the atmosphere and back to the lake

The following can be a representation of the water cycle;

Fill the glass jar with water to resemble the lake.

Put the lamp next to the jar to symbolize the sun.

Wrap the jar in plastic sheet to imitate the atmosphere.

Turn on the bulb to represent the sun warming the water.

When the water in the jar warms up and evaporates into water vapor, moisture will condense on the plastic wrap.

The water vapor will ascend and collect on the plastic wrap to represent the water vapor rising into the atmosphere.

Water vapor cools as it rises and condenses back into liquid form, as shown by the water droplets gathering on the plastic wrap.

Learn more about the water cycle:https://brainly.com/question/31195929

#SPJ1

The method for determining the sum of Vitamin C in fruit juice ordinarily includes adding an indicator (such as DCPIP) to the juice test and titrating the test with a standard arrangement of ascorbic corrosive until the marker changes colour.

In any case, there are a few variables that seem to make this strategy troublesome to utilize for other natural product juices such as cranberry, blackcurrant, or pomegranate juice:

In this manner, whereas the strategy for deciding the sum of Vitamin C in natural product juice can be a valuable apparatus, it may not be appropriate for all sorts of natural product juices and may have to be be adjusted or adjusted to account for these variables. 

To learn more about VITAMIN C,

https://brainly.com/question/1165711

#SPJ1

Answer:

56.11 g/mol

Explanation:

To determine the molar mass of potassium hydroxide, we need to find the atomic mass of each element in the compound and add them up.

The atomic mass of potassium (K) is 39.10 g/mol, the atomic mass of oxygen (O) is 16.00 g/mol, and the atomic mass of hydrogen (H) is 1.01 g/mol.

So, the molar mass of potassium hydroxide (KOH) is:

Molar mass of K = 39.10 g/mol

Molar mass of O = 16.00 g/mol

Molar mass of H = 1.01 g/mol

Molar mass of KOH = Molar mass of K + Molar mass of O + Molar mass of H

= 39.10 g/mol + 16.00 g/mol + 1.01 g/mol

= 56.11 g/mol

Therefore, the molar mass of potassium hydroxide (KOH) is 56.11 g/mol.

Answer:

B

self explanatory

Explanation:

Answer:

9.98%

Explanation:

To find the percent of NaCl in the mixture, we need to divide the mass of NaCl by the total mass of the mixture, and then multiply by 100 to express it as a percentage.

Step 1: Find the total mass of the mixture

total mass = mass of NaCl + mass of water

total mass = 23.5 g + 212 g

total mass = 235.5 g

Step 2: Calculate the percent of NaCl

% NaCl = (mass of NaCl / total mass) x 100

% NaCl = (23.5 g / 235.5 g) x 100

% NaCl = 0.0997876857 x 100

% NaCl = 9.978768677%

% NaCl = 9.98%

Therefore, the percent of NaCl in the mixture is 9.98%.

Answer:

Vestigial

Explanation:

The retention of genetically determined traits or structures that have partially or completely lost their ancestral purpose in a specific species is known as vestigiality. In most cases, evaluating the vestigality requires comparison with comparable traits in closely related species.

Answer: H2O + CO2 --> H2CO3

Explanation:

Water and Carbon Dioxide react to form Carbonic Acid

H2O + CO2 --> H2CO3

To find the solution concentration, you need to know the amount of solute and the volume of the solution.

The solution concentration is typically expressed in terms of molarity (moles of solute per liter of solution). To calculate the molarity of a solution, divide the moles of solute by the volume of the solution in liters.

Another way to express solution concentration is in terms of percent by mass or volume, which is calculated by dividing the mass or volume of the solute by the mass or volume of the solution and multiplying by 100.

To find the solution concentration, you'll need to calculate the ratio of solute (substance being dissolved) to solvent (substance doing the dissolving) in the mixture.

Concentration is commonly expressed in units like molarity (M), mass/volume percent, or parts per million (ppm).

To calculate molarity (M), divide the moles of solute by the volume of the solvent (in liters). The formula is:

Molarity (M) = moles of solute / volume of solvent (L)

For mass/volume percent, divide the mass of the solute by the total volume of the solution and multiply by 100. The formula is:

Mass/volume percent = (mass of solute / total volume of solution) x 100

For parts per million (ppm), divide the mass of the solute by the total mass of the solution and multiply by 1,000,000.

The formula is:
ppm = (mass of solute / total mass of solution) x 1,000,000
Choose the appropriate formula based on the units required for your specific problem.

For more question on solution concentration

https://brainly.com/question/26255204

#SPJ11

Answer:

There are 1000 milliliters (ml) in one liter. Therefore, the teacher has a total of 6 x 1000 = 6000 ml of sodium nitrate solution.

Explanation:

To divide the solution evenly among the 24 students, we need to divide the total volume of the solution by the number of students:

6000 ml ÷ 24 students = 250 ml per student

Therefore, each student will receive 250 milliliters of sodium nitrate solution.

Answer:

Answer- 0.25ml

Explanation:

So there are 24 students and 6 liters of Solution.So to evenly distribute

Just divide 6 by 24(6÷24/)... So the answer will be 0.25

The maximum mass of water that can be produced by the reaction is 43.3 g, rounded to three significant figures.

The balanced chemical equation for the reaction between butane and oxygen is:

C4H10 + 13/2 O2 → 4 CO2 + 5 H2O

From the equation, we can see that 1 mole of butane reacts with 13/2 moles of oxygen to produce 5 moles of water.

moles of butane = 34. g / 58.12 g/mol = 0.585 mol

moles of oxygen = 200. g / 32.00 g/mol = 6.25 mol

Determining the limiting reactant.

butane : oxygen = 0.585 mol : 6.25 mol

= 0.0936 : 1.00

stoichiometric ratio = 1 : 13/2

= 0.7692 : 1.00

Since the actual ratio is lower than the stoichiometric ratio for oxygen, it is the limiting reactant.

The maximum amount of water that can be produced is determined by the amount of limiting reactant (oxygen).

moles of water = 5/13 * 6.25 mol

= 2.403 mol

Finally, we can convert the moles of water to grams:

mass of water = 2.403 mol * 18.015 g/mol

= 43.3 g

Learn more on stoichiometry here https://brainly.com/question/14935523

#SPJ1

The amount of heat absorbed during the reaction is 385.9 cal.

Calorimetry is the science of measuring the heat absorbed or evolved during the course of a chemical reaction or change of state.

The amount of heat in a reaction can be calculated as follows;

Q = mc∆T

Where;

Q = 45.4 × 1 × {31.5 - 23)

Q = 45.4 × 8.5

Q = 385.9 cal

Learn more about calorimetry at: https://brainly.com/question/25384702

#SPJ1

Answer:

A solvent front is the point on a chromatography paper or plate where the solvent has reached the end of the stationary phase and has migrated as far as it can go. It is the farthest point reached by the solvent in the chromatography process.