Can someone help me asap? It’s due today!! I will give brainliest if it’s correct.

The correct order of the compounds in the medicine from least to greatest is: C, B, D, A.

To order the compounds in the medicine from least to greatest, we need to compare their amounts.

First, we can compare compounds A and C. Compound A has an amount of 0.6 milligrams, which is greater than the amount of compound C, which is only 0.08 milligrams. Therefore, we know that compound C is the smallest amount in the medicine.

Next, we can compare compounds B and D. Compound B has an amount of 0.402 milligrams, which is smaller than the amount of compound D, which is 0.46 milligrams. Therefore, we know that compound B is the second smallest amount in the medicine.

Finally, we can compare compounds A and D. Compound A has an amount of 0.6 milligrams, which is greater than the amount of compound D, which is only 0.46 milligrams. Therefore, we know that compound D is the third smallest amount in the medicine.

Therefore, the correct order of the compounds in the medicine from least to greatest is: C, B, D, A.

It's important to note that the amount of each compound in the medicine may have different effects on the patient's health, and that the order of the compounds from least to greatest may not necessarily reflect their importance or efficacy in treating a particular condition. The ordering of the compounds is simply a matter of comparing their relative amounts in the medicine.

To learn more about compounds here:

https://brainly.com/question/30217944

#SPJ4

176, 264. your welcome!

The area of the panel left after she cuts the hole is 5.215 ft²

Given that a circular hole of 1 foot by foot has been cut out of a rectangular panel of 3 feet by 2 feet,

We need to find the area of the remaining part after the cutting of the hole,

So, we will find the same by subtracting the area of the hole from the area of the panel.

So, area of the hole = π×radius² = 3.14×0.5² = 0.785 ft²

Area of the panel = length × width = 3 × 2 = 6 ft²

Area remaining part = 6-0.785 = 5.215 ft²

Hence the area of the panel left after she cuts the hole is 5.215 ft²

Learn more about area click;

https://brainly.com/question/27683633

#SPJ1

To find the derivative of sin(y²)+x=eʸ using implicit differentiation, we need to differentiate both sides of the equation with respect to x.

Starting with the left side, we use the chain rule and the derivative of sin(u), which is cos(u) times the derivative of u with respect to x:

d/dx(sin(y²)) = cos(y²) * d/dx(y²)

Using the power rule, we get:

d/dx(y²) = 2y * d/dx(y)

Putting it all together:

d/dx(sin(y²)) = 2y * cos(y²) * d/dx(y)

Now let's move on to the right side of the equation. The derivative of implicit function eʸ with respect to x is simply eʸ times the derivative of y with respect to x:

d/dx(eʸ) = eʸ * d/dx(y)

Putting it all together, we have:

2y * cos(y²) * d/dx(y) + 1 = eʸ * d/dx(y)

We can now solve for d/dx(y):

d/dx(y) = (1 - 2y * cos(y²)) / eʸ

Therefore, the derivative of sin(y²)+x=eʸ is:

d/dx(y) = (1 - 2y * cos(y²)) / eʸ.

WHAT IS IMPLICIT DIFFERENTIATION : https://brainly.com/question/11887805

#SPJ11

The equation of the circle graphed is given as follows:

(x + 1)² + (y + 3)² = 36.

The equation of a circle of center [tex](x_0, y_0)[/tex] and radius r is given by:

[tex](x - x_0)^2 + (y - y_0)^2 = r^2[/tex]

The radius of a circle represents the distance between the center of the circle and a point on the circumference of the circle.

The coordinates of the center of the circle are given as follows:

(-1, -3).

The radius of the circle is given as follows:

r = 6 units.

Then the equation of the circle is given as follows:

(x + 1)² + (y + 3)² = 36.

More can be learned about the equation of a circle at https://brainly.com/question/1506955

#SPJ1

There are 39 red blocks out of 65 total blocks.

To solve this problem, we need to find the total number of blocks in each repeating pattern. The pattern is three red blocks followed by two blue blocks. So in each pattern, there are five blocks total.

To find the number of red blocks in 65 total blocks, we need to figure out how many times the pattern repeats. We can do this by dividing the total number of blocks (65) by the number of blocks in each pattern (5):

65 ÷ 5 = 13

So the pattern repeats 13 times.

In each pattern, there are three red blocks. So to find the total number of red blocks, we need to multiply the number of red blocks in each pattern (3) by the number of times the pattern repeats (13):

3 x 13 = 39

Therefore, there are 39 red blocks out of 65 total blocks.

The correct answer is option B.

To know more about blocks refer here:

https://brainly.com/question/30332935

#SPJ11

The set of numbers is an example of the integers.

The set of numbers is an example of the integers. Integers are whole numbers (positive or negative) and zero. They are often represented by the symbol "Z". In this set, we have all the whole numbers from negative infinity to positive infinity, including negative and positive 3, 2, 1, 0, and all the numbers in between. The use of ellipses indicates that the set goes on indefinitely in both directions. It is worth noting that 1 appears twice in the set, indicating that sets of integers may have repeated elements. Overall, the set of numbers shown is an infinite set of integers.

Learn more about numbers in: https://brainly.com/question/17429689

#SPJ1

"The probability that the first freshman to arrive will be seated at a round table is (5/13)."

To calculate the probability, we need to determine the total number of seats and the number of seats at round tables.

There are 8 rectangular tables with 6 chairs each, so the total number of seats at rectangular tables is 8 * 6 = 48.

There are 5 round tables with 4 chairs each, so the total number of seats at round tables is 5 * 4 = 20.

The total number of seats in the community center is 48 + 20 = 68.

The probability of the first freshman being seated at a round table is the number of seats at round tables (20) divided by the total number of seats (68), which gives us 20/68 = 5/17.

Therefore, the correct answer is option C: 5/17.

In conclusion, the probability that the first freshman to arrive will be seated at a round table is 5/17. This is obtained by dividing the number of seats at round tables by the total number of seats in the community center.

To know more about probability refer here:

https://brainly.com/question/31828911

#SPJ11

The service should wax approximately 233 cars daily to maximize profit.

To maximize profit, we need to find the number of cars (q) that would result in the highest profit. Profit function P(q) can be calculated as:

P(q) = Revenue - Cost
P(q) = 65q - (0.06q² + 37q + 360)

Now, to find the optimal value of q, we can calculate the derivative of the profit function with respect to q and set it to zero:

dP(q)/dq = 65 - (0.12q + 37)
0 = 65 - 0.12q - 37

Solve for q:

0.12q = 28
q = 28 / 0.12
q ≈ 233.33

Since the number of cars must be a whole number, we can round q to the nearest integer. Therefore, the service should wax approximately 233 cars daily to maximize profit.

To learn more about optimal value, refer below:

https://brainly.com/question/31025731

#SPJ11

The expected cost of Bob's lunch is $9.69, rounded to the nearest cent.

To figure out the probability of Bob and Anna successfully meeting up, we need to use a unitary method. The probability of Bob choosing a specific time is 1/4, and the probability of Anna choosing the same time is also 1/4. Since they both need to choose the same time, we can multiply their individual probabilities to find the probability of them meeting up:

1/4 x 1/4 = 1/16

This means that the probability of Bob and Anna successfully meeting up is 1/16 or 0.0625.

Now we can use this probability to find the expected cost of Bob's lunch. If Bob and Anna meet up, Bob will get a discount on his lunch and pay $5. If they don't meet up, he'll have to pay the full price of $10. So the expected cost of Bob's lunch is:

(Probability of meeting up x Cost if they meet) + (Probability of not meeting up x Cost if they don't meet)

(1/16 x $5) + (15/16 x $10) = $0.3125 + $9.375 = $9.69

To know more about unitary method here

https://brainly.com/question/28276953

#SPJ4

The main types of markets are:

So, the correct answer is "consumer" and "industrial".

To know more about Consumer markets refer here

https://brainly.com/question/13249779#

#SPJ11

The inequality that represents the cost of each cookie is C ≤ $2, where C is the cost of each cookie.

An inequality is a mathematical expression that shows a relationship between two values that may not be equal. To represent the cost of each cookie using an inequality, we can first determine the cost per cookie by dividing the total cost of a box by the number of cookies in each box. In this case, that would be $16 divided by 8 cookies.

Let C represent the cost of an individual cookie. Since the most a box can cost is $16, the highest cost per cookie would be $16 / 8 = $2. To express this situation as an inequality, we can write:

C ≤ $2

This inequality indicates that the cost of each cookie (C) must be less than or equal to $2, ensuring that the total cost for a box of cookies does not exceed the maximum price of $16. By using this inequality, we can evaluate different cookie flavors and their respective costs to confirm that they meet Cindy's Sweet Treats' pricing requirements.

Learn more about inequality here: https://brainly.com/question/30238989

#SPJ11

The linearization of the function z = x =√y at the point (-2, 4) is L(x, y) = 2 + (1/4)(y-4).

To find the linearization of the function z = x =√y at the point (-2, 4), we need to use the formula for the linearization:

[tex]L(x, y) = f(a, b) + f_x(a, b)(x-a) + f_y(a, b)(y-b)[/tex]

where f(a, b) is the value of the function at the point (a, b), f_x(a, b) is the partial derivative of f with respect to x evaluated at (a, b), f_y(a, b) is the partial derivative of f with respect to y evaluated at (a, b), and (x-a) and (y-b) are the distances from the point (a, b) to the point (x, y).

In this case, we have:
f(x, y) = √y
a = -2
b = 4

So, we need to find the partial derivatives f_x and f_y:

[tex]f_x(x, y) = 0f_y(x, y) = 1/(2√y)[/tex]

evaluated at (a, b):

f_x(-2, 4) = 0
f_y(-2, 4) = 1/(2√4) = 1/4

Now, we can plug in all the values into the linearization formula:

[tex]L(x, y) = f(-2, 4) + f_x(-2, 4)(x-(-2)) + f_y(-2, 4)(y-4)L(x, y) = √4 + 0(x+2) + (1/4)(y-4)L(x, y) = 2 + (1/4)(y-4)[/tex]

Therefore, the linearization of the function z = x =√y at the point (-2, 4) is L(x, y) = 2 + (1/4)(y-4).

To learn more about partial derivative, refer below:

https://brainly.com/question/29652032

#SPJ11

The minimum sample size which is need to to create the given confidence interval is equal to 467.

Sample size n

z = z-score for the desired confidence level

From attached table,

For 85% confidence level, which corresponds to a z-score of 1.44.

Maximum error or margin of error E = 0.06

Population standard deviation σ = 0.9

Minimum sample size required to construct a 85% confidence interval with an error of no more than 0.06,

Use the formula,

n = (z / E)^2 × σ^2

Plugging in the values, we get,

⇒ n = (1.44 / 0.06)^2 × 0.9^2

⇒ n = 466.56

Rounding up to the next integer, we get a minimum sample size of 467.

Therefore, the minimum sample size required to construct a 85% confidence interval with an error of no more than 0.06 is 467.

Learn more about sample size here

brainly.com/question/15120195

#SPJ4

The probability that the mean of the sample would differ from the population mean by less than 43 points is approximately 0.7597 or 0.7600 (rounded to four decimal places).

Given that the standard deviation of the scores on a skill evaluation test is 320 points with a mean of 1434 points. And we have a sample of size n = 338.

We need to find the probability that the mean of the sample would differ from the population mean by less than 43 points.

The standard error of the mean is given by:

SE = σ/√n

where σ is the population standard deviation and n is the sample size.

Substituting the given values, we get:

SE = 320/√338

SE ≈ 17.398

To find the probability, we need to standardize the sample mean using the standard error as follows:

Z = (X - μ) / SE

where X is the sample mean, μ is the population mean, and SE is the standard error of the mean.

Substituting the given values, we get:

Z = (1434 - 1434) / 17.398

Z = 0

Since the mean difference is 0, we can find the probability of a difference less than 43 points by finding the probability that Z lies between -43/17.398 and 43/17.398.

Using a standard normal distribution table or calculator, we find that this probability is approximately 0.7597.

Therefore, the probability that the mean of the sample would differ from the population mean by less than 43 points is approximately 0.7597 or 0.7600 (rounded to four decimal places).

To learn more about population visit:

https://brainly.com/question/24786731

#SPJ11

The surface area of the pyramid is 72 + 486√3 metres.

The pyramid above is an hexagonal pyramid. The surface area of the hexagonal pyramid can be found as follows:

surface area of a hexagonal pyramid = ph / 2 + B

where

Therefore,

Base area = 1 / 2pa

where

Base area = 1 / 2 × (18 × 6) × 9√3

Base area = 1 / 2 × 108 × 9√3

Base area = 54 × 9√3

Base area = 486√3 metres

surface area of a hexagonal pyramid = 108 × 18 / 2 + 486√3

Therefore,

surface area of a hexagonal pyramid = 972 + 486√3 metres

learn more on surface area here: https://brainly.com/question/14563874

#SPJ1

Answer:

1.03x 10^{10}

Step-by-step explanation:

No explanation, simple calculator calculation does the job.

Answer:

approximately 42.85 of whatever unit

The value of c is 0.4 and  the corresponding horizontal distance travelled by the ball is 4 meters.

We are given the projectile equation:

y = -1/8x² + x + c

To find the value of c, we can use the fact that the maximum height attained by the ball is 2.4 meters. The maximum height occurs at the vertex of the parabola, which is given by:

x = -b/2a

where a = -1/8 and b = 1.

Therefore,

x = -(1)/(2*(-1/8)) = 4

So, the corresponding horizontal distance travelled by the ball is 4 meters.

Now, we can use the maximum height attained by the ball to solve for c.

y = -1/8x² + x + c

Substituting x = 4 and y = 2.4, we get:

2.4 = -1/8(4)² + 4 + c

2.4 = -1/8(16) + 4 + c

2.4 = -2 + 4 + c

c = 0.4

Therefore, the value of c is 0.4.

Learn more about Projectile motion

brainly.com/question/1761464

#SPJ11

The minimum surface area of the box is 68 cm², which corresponds to option (d).

Let the side length of the square base be x and the height of the box be h. Then, we have:

Volume of the box = x²h = 32

h = 32/x²

The surface area of the box is given by:

S = x² + 4(xh) = x² + 4x(32/x²) = x² + 128/x

To find the minimum surface area, we can differentiate S with respect to x, set the derivative equal to zero, and solve for x:

dS/dx = 2x - 128/x² = 0

2x = 128/x²

x⁴ = 64

x = 2 cm

Note that we need to check that this critical point gives us a minimum surface area. We can do this by checking the second derivative:

d²S/dx² = 2 + 256/x³

d²S/dx² at x = 2 is positive,

indicating that this critical point gives us a minimum surface area.

Substituting x = 2 in the equation for S, we get:

S = 2² + 128/2 = 4 + 64 = 68

Therefore, the minimum surface area of the box is 68 cm², which corresponds to option (d).

Learn more about differentiate

brainly.com/question/24062595

#SPJ11

It seems that you have provided some information about the scenario, but there is no question. How may I assist you?

To know more about probability refer here:

https://brainly.com/question/30034780

#SPJ11

Answer:

a)  15, 18, 27, 48, 52, 86, 103

b)  Minimum number = 15

c)  Maximum number = 103

d)  Median = 48

e)  First quartile = 18

f)  Third quartile = 86

g)  Interquartile range = 68

Step-by-step explanation:

To write the data from least to greatest, arrange the numbers in ascending order:

[tex]\hrulefill[/tex]

The minimum number in a set of data is the smallest value.

Therefore, the minimum number of animals is 15.

[tex]\hrulefill[/tex]

The maximum number in a set of data is the greatest value.

Therefore, the maximum number of animals is 103.

[tex]\hrulefill[/tex]

The median of a set of data is the middle value when all data values are placed in order of size.  

[tex]\begin{array}{ccccccc}\sf 15, &\sf 18, &\sf 27, &\sf 48, &\sf 52, &\sf 86,& \sf 103\\ &&&\uparrow&&&\\&&&\sf median&&&\end{array}[/tex]

Therefore, the median is the fourth number, which is 48.

[tex]\hrulefill[/tex]

The lower quartile (Q₁) is the median of the data values to the left of the median.  

[tex]\begin{array}{ccccccc}\sf 15, &\sf 18, &\sf 27, &\sf 48, &\sf 52, &\sf 86,& \sf 103\\ &\uparrow &&\uparrow&&&\\&\sf Q_1&&\sf median&&&\end{array}[/tex]

Therefore, the median of the first half of the data is 18.

[tex]\hrulefill[/tex]

The lower quartile (Q₃) is the median of the data values to the right of the median.  

[tex]\begin{array}{ccccccc}\sf 15, &\sf 18, &\sf 27, &\sf 48, &\sf 52, &\sf 86,& \sf 103\\ &&&\uparrow &&\uparrow&\\&&&\sf median&&\sf Q_3&\end{array}[/tex]

Therefore, the median of the second half of the data is 86.

[tex]\hrulefill[/tex]

The interquartile range (IQR) is the difference between the third quartile (Q₃) and the first quartile (Q₁).

[tex]\begin{aligned}\sf IQR &=\sf Q_3 - Q_1 \\&= \sf 86 - 18 \\&= \sf 68\end{aligned}[/tex]

Therefore, the interquartile range is 68.

The cost of a Powerade is $0.75 if 2 bags of chips and 2 Powerades cost $3.50 and one bag of chips and 3 Powerades cost $3.75.

Let the cost of one Powerade be x

The cost of one bag of chips be y

Cost of 2 bags of chips and 2 Powerades = $3.50

Cost of 2 bags of chips = 2y

Cost of 2 Powerades = 2x

2x + 2y = 3.50 ----(i)

Cost of one bag of chips and 3 Powerades= $3.75

Cost of 1 bag of chips = y

Cost of 3 Powerades = 3x

x + 3y = 3.75

Multiply the above equation by 2

2x + 6y = 7.50 -----(ii)

Subtract (ii) and (i)

4y = 4

y = $1

The cost of one bag of chips is $1

x + 3 = 3.75

x = $0.75

The cost of one Powerade is $0.75

Learn more about Equation:

https://brainly.com/question/28871326

#SPJ4

1)  x+y=4. This is the equation of the line in standard form.

2)  x+y=4. This is the equation of the line in standard form.

3) The equation of the other diagonal is x=0.

1) The median of a trapezoid connects the midpoints of the non-parallel sides. The midpoint of RT is ((-1+7)/2,(5-2)/2)=(3,1.5) and the midpoint of SU is ((1+2)/2,(8+0)/2)=(1.5,4). The line containing the median passes through these two points, so we can use them to find the equation of the line. The slope of the line is (4-1.5)/(1.5-3)=1.5/(-1.5)=-1. The midpoint formula for a line gives us (y-1.5)=-1(x-3), which simplifies to x+y=4. This is the equation of the line in standard form.

2) To find the altitude to the hypotenuse of a right triangle, we need to find the midpoint of the hypotenuse and the slope of the hypotenuse. The midpoint of PQ is ((-1+3)/2,(1+5)/2)=(1,3), and the midpoint of PR is ((-1+5)/2,(1-5)/2)=(2,-2). The slope of PQ is (5-1)/(3-(-1))=4/4=1, so the slope of the altitude is -1. We can use the point-slope form of a line to get y-3=-1(x-1), which simplifies to x+y=4. This is the equation of the line in standard form.

3) The diagonals of a square are perpendicular bisectors of each other, so we can find the equations of both diagonals using the midpoint and slope formulas. The midpoint of AC is ((3-3)/2,(3-3)/2)=(0,0), and the midpoint of BD is ((-3+3)/2,(3-3)/2)=(0,0). The slope of AC is (3-(-3))/(3-(-3))=6/6=1, so the slope of BD is -1. Using the point-slope form of a line, we can get y-0=-1(x-0), which simplifies to y=-x. This is the equation of one diagonal. To find the equation of the other diagonal, we use the midpoint of AB ((-3+3)/2,(3+3)/2)=(0,3) and the midpoint of CD ((3-3)/2,(-3-3)/2)=(0,-3). The slope of AB is (3-3)/(3-(-3))=0, so the slope of the other diagonal is undefined (since it's perpendicular to AB). The equation of the other diagonal is x=0.

learn more about "standard form":-https://brainly.com/question/19169731

#SPJ11

The per unit total cost at an output level of 1,000 bicycles is calculated to be $139.13.

To calculate the per unit total cost using the high-low method, follow these steps:

1. Identify the highest and lowest output levels (1,150 and 950 bicycles).
2. Calculate the difference in variable costs and output levels: ($115,000 - $95,000) / (1,150 - 950) = $20,000 / 200 = $100 per bicycle.
3. Calculate the variable cost for 1,000 bicycles: $100 x 1,000 = $100,000.
4. Add the fixed cost: $100,000 (variable cost) + $45,000 (fixed cost) = $145,000 (total cost).
5. Calculate the per unit total cost: $145,000 / 1,000 = $139.13 per bicycle.

To know more about variable costs click on below link:

https://brainly.com/question/27853679#

#SPJ11

Let's start by using algebra to represent the relationships between the dimensions of the box:

So the dimensions of the box are: height = h, width = 2h, length = 3h.

Now let's find the volume of the box:

Since we know that each chocolate rests in a cube with a side length of 1 inch, the volume of each chocolate is [tex]1^3 = 1[/tex] cubic inch. So the total volume of all 48 chocolates is 48 cubic inches.

Therefore, we can set up an equation to solve for h:

  [tex]48 = (6h^3) / (1 cubic inch/chocolate)[/tex]

[tex]48 = 6h^3[/tex]

[tex]8 = h^3[/tex]

   h = 2

So the height of the box is 2 inches, the width is 4 inches (since it is 2 times the height), and the length is 6 inches (since it is 1.5 times the width).

To check our work, we can calculate the volume of the box:

   Volume = height x width x length

   Volume = 2 x 4 x 6

   Volume = 48 cubic inches

This matches the total volume of all  48 chocolates, so we can be confident in our answer.

To know more about volume  refer here

https://brainly.com/question/24086520#

#SPJ11

Answer:

90

Step-by-step explanation:

The top industries are agriculture, mining, tourism, and manufacturing.

The quadratic equations are as given.A manufacturing company in my fiefdom produces and sells ceramic pots.

The company has fixed costs of$ 10,000 per month and variable costs of$ 5 per pot. The company's profit is given by the quadratic function R( x) = -0.2 x2 50x, where x is the number of pots produced and vended in a month.

What's the maximum profit that the company can induce in a month: To break this problem, we can use the formula for chancing the maximum value of a quadratic function, which is given by x = - b/ 2a. In this case, the measure of the x2 term is-0.2, and the measure of the x term is 50. Plugging these values into the formula, we get x = -50/( 2 *(-0.2)) = 125 Hence we obtain the quadratic equation.

Learn more about quadratic function at

https://brainly.com/question/29053174

#SPJ4