Answer:
14.45 g of O₂.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2KClO₃ —> 2KCl + 3O₂
Next, we shall determine the mass of KClO₃ that decomposed and the mass of O₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of KClO₃ = 39 + 35.5 + (16×3)
= 39 + 35.5 + 48
= 122.5 g/mol
Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g
Molar mass of O₂ = 2 ×16 = 32 g/mol
Mass of O₂ from the balanced equation = 3 × 32 = 96 g
SUMMARY:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Finally, we shall determine the mass of O₂ produced by heating 36.89 g of KClO₃. This can be obtained as follow:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Therefore, 36.89 g of KClO₃ will decompose to produce =
(36.89 × 96)/245 = 14.45 g of O₂
Thus, 14.45 g of O₂ were obtained from the reaction.
What is an organelle
(A)Organelles are only common to prokaryotic cells
(B)An organelle is made up of different tissues working together
(C)An organelle is structure in a cell that performs a specific task...
Answer:
CExplanation:
An organelle is structure in a cel that performs a specific task or job.
Answer:
I believe the answer is C: an organelle is structure in a cell that performs a specific task
Water’s unique properties, high heat capacity, high density, solid phase less dense than liquid phase can be attributed to
A. The shape of the molecule
B. The polarity of the molecules and hydrogen bonding between molecules.
C. The covalent oxygen hydrogen bonds in the molecule.
D. It’s formula h2o.
Answer:
B- The polarity of the molecules and hydrogen bonding between molecules.
Explanation:
Hope this helps:)
Which of the following is not a property of water?
A. It dissolves most ionic substances.
B. It has a lower density than most liquids do.
C. It has a higher density in the liquid state than in the solid state.
D. It has a high specific heat.
Answer:
b.it has a lower density than most liquid do
Balance the following equations.
Al4C3 + H2O → Al(OH)3 + CH4
NH3 + O2 → NO + H2O
Answer:
Al4C3 +12 H2O → 4Al(OH)3 + 3CH4
4NH3 + 5O2 → 4NO + 6H2O
Which is a pollutant associated with high-tech gadgets in landfills?
O A. Nitrogen
O B. Carbon Dioxide
O C. Iron
D. Mercury
Answer:
D
Explanation:
Most likely, the pollutant that is most associated with high-tech gadgets in landfills would be heavy metals like lead, cadmium and mercury since they are being used in most of the electronic devices. Usually these metals can be found in the batteries of these gadgets.
High-tech gadgets in landfills would be heavy metals like lead, cadmium and mercury since they are being used in most of the electronic devices. Usually these metals can be found in the batteries of these gadgets. Hence, option D is correct.
What are landfills?Modern landfills are well-engineered and managed facilities for the disposal of solid waste.
Landfills are located, designed, operated and monitored to ensure compliance with federal regulations.
For instance, television and computer monitors normally contain hazardous materials such as lead, mercury, and cadmium, while nickel, beryllium, and zinc can often be found in circuit boards.
Due to the presence of these substances, recycling and disposal of e-waste becomes an important issue.
Learn more about landfills here:
https://brainly.com/question/9179167
#SPJ2
Air in a closed cylinder is heated from 15°C to 36°C. If the initial pressure is 1000 torr, determine what is the final pressure? *
Answer:
1072 torr
Explanation:
To answer this problem we can use Gay-Lussac's law, which states:
P₁T₂=P₂T₁Now we convert the given temperatures into K:
T₁ = 15°C ⇒ 15+273.16 = 288.16 KT₂ = 36°C ⇒ 36+273.16 = 309.16 KWe input the data:
1000 torr * 309.16 K = P₂ * 288.16 KAnd solve for P₂:
P₂ = 1072 torrHow many kilograms of phosphorous are in a sample containing 1.00E31 phosphorous atoms?
Answer: [tex]5.15\times 10^5kg[/tex]
Explanation:
According to avogadro's law, 1 mole of every substance weighs equal to the molecular mass and contains avogadro's number of particles.
To calculate the number of moles, we use the equation:
Putting in the values we get:
[tex]\text{Number of moles}=\frac{1.00\times 10^{31}}{6.023\times 10^{23}}=0.166\times 10^{8}moles[/tex]
1 mole of phosphorous [tex]P[/tex] weighs = 31 g
Thus [tex]0.166\times 10^8[/tex] moles of phosphorous [tex]P[/tex] weigh=[tex]\frac{31}{1}\times 0.166\times 10^8=5.15\times 10^8g=5.15\times 10^5kg[/tex]
0.01 M HCl solution has a pH of 2. Suppose that during the experiment, both the universal pH indicator and the cabbage indicator turn orange-red for 0.01 M HCl. What can you conclude about the the cabbage indicator key?
A) It matches the universal pH indicator and is indicating the proper pH.
B) It should completely match the universal indicator key for all pH values greater than 7 (base).
C) It should completely match the universal indicator key for all pH values.
D) There was some sort of experimental error, because the indicators should never match.
Answer:
(A) It matches the universal pH indicator and is indicating the proper pH.
Explanation:
Correct on edge 2021
Given the data from the question, the correct statement is:
The cabbage indicator matches the universal pH indicator and is indicating the proper pH (Option A) What is pH ?This is simply a measure of the acidity / alkalinity of a solution.
The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration
pH scaleThe pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.
The scale ranges from 0 to 14 indicating:
0 to 6 indicates acid 7 indicates neutral 8 to 14 indicate basicpH indicatorsThese are devices / equipment used to indicate if a solution is acidic, neutral or basic.
From the question given above, we were told that the universal and the cabbage pH indicator gives the same result.
Therefore, we can conclude that the cabbage indicator is indicating the proper pH (Option A)
Learn more about pH:
https://brainly.com/question/3709867
A tank of water was contaminated with a colored dye (D). To determine the concentration of D, an analyst took 5.0-mL solution from the contaminated water as a sample, and measured the absorbance, yielding a value of 0.10. Afterwards, the analyst added 5.0-mL of 0.02 M standard D solution into the sample solution, and measured the absorbance, yielding a value of 0.20. What is the concentration of D in the original sample solution
Answer:
0.005 M
Explanation:
Given data:
volume of sample solution ( volume of D ) = 5.0 mL
volume of added stock solution ( V1 ) = 5.0 mL
concentration of added stock solution ( N1 ) = 0.02 M
Total volume of concentration ( V2 )= 10 mL = ( 5.0 mL + 5.0mL)
concentration of Total volume of sample ( C2 ) = 0.01
N2 = ( N1V1 ) / V2
= ( 0.02 * 5 ) / 10 = 0.01 m
absorbance of sample solution ( A1 ) = 0.10
absorbance of additional sample solution ( A2 ) = 0.20
attached below is the remaining part of the detailed solution
The amount of exposed surface area of the liquid affects how quickly
evaporation occurs.
O True
O False
Which carbohydrate strengthens plant cells?
A. glucose
B. glycogen
C. cellulose
D. lactose
Answer: Its C
Explanation:
the eye is connected to the brain by nerves.
A. True
B. False
the answer is A..which is true
what is the molarity of a solution with 130g of CoCl2 in 1/2 liter? (can you show the steps please)
Answer:
2M
Explanation:
M=mol/L
1. Find moles of CoCl2
mass of substance/molar mass = 130/129.833 = 1.001 mol
3. Substitute in molarity equation
M=(1.001/0.5)
M= around 2M
The molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M
HOW TO CALCULATE MOLARITY:
The molarity of a solution can be calculated by dividing the number of moles of that substance by its volume:Molarity = no. of moles ÷ volumeFirst, we convert 130g of CoCl2 to moles as follows:Molar mass of CoCl2 = 129.84 g/molmoles = 130g ÷ 129.84g/molmoles of CoCl2 = 1molMolarity of CoCl2 solution = 1mol ÷ 0.5LMolarity of CoCl2 = 2MTherefore, the molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M.
Learn more at: https://brainly.com/question/15948514?referrer=searchResults
An aqueous solution containing 6.06 g of lead(II) nitrate is added to an aqueous solution containing 6.58 g of potassium chloride. Enter the balanced chemical equation for this reaction. Be sure to include all physical states. balanced chemical equation: What is the limiting reactant
Answer:
Pb(NO₃)₂ is the limiting reactant.
The equation is: Pb(NO₃)₂ (aq) + 2KCl (aq) → PbCl₂ (s) ↓ + 2KNO₃ (aq)
Explanation:
We identify our reactants:
Pb(NO₃)₂ → Lead (II) nitrate
KCl → Potassium chloride
Our reaction is:
Pb(NO₃)₂ (aq) + 2KCl (aq) → PbCl₂ (s) ↓ + 2KNO₃ (aq)
1 mol of Lead (II) nitrate reacts to 2 moles of KCl, in order to produce 2 moles of potassium nitrate and 1 mol of slid Lead (II) chloride.
We determine the moles of the reactants:
6.06 g . 1mol /331.2 g = 0.0183 moles of Lead (II) nitrate
6.58 g . 1mol / 74.55g = 0.0882 moles of KCl
2 moles of KCl react to 1 mol of Pb(NO₃)₂
Then, 0.0882 moles of KCl may react to (0.0882 . 1) /2 = 0.0441 moles
We have 0.0183 moles of Pb(NO₃)₂ and we need 0.441 moles. Then, the
Pb(NO₃)₂ is our limiting reactant.
upal.
Consider the elements sodium, aluminium, silicon and sulphur. Which one will form
an oxide that will give a pH of less than 7 when in solution?
Answer:
sodium
Explanation:
this is because sodium is neutral ....hence the pH formed will be 7
The element sodium will form an oxide that will give a pH of less than 7 when in solution.
What is element?Any compound that could be broken down into simpler chemicals by regular chemical processes is referred to as a chemical element.
What is pH?pH is a measurement of how acidic or basic an aqueous solution is in relation to other liquids.
Sodium is neutral in nature that's why the element sodium will form an oxide that will give a pH of less than 7 when in solution.
To know more about pH and element.
https://brainly.com/question/491373
#SPJ2
A white crystalline salt conducts electricity
when it is melted and when it is dissolved
in water. Which type of bond does this salt
contain?
A. ionic
B. metallic
C. covalent
D.
network
1 How many milliliters of a 1.75 M LiCl solution contain 15.2 g of LiCI? (9.4)
Answer:
I dont no ok bye
Thank you
what is the mass of 1mol of chlorine ions?
Answer:
71g
Explanation:
i think thats right?
One mole of chlorine would be 71 g unless they said "1 mole of chlorine ATOMS".
Plzz help
How many moles of H2O can be made from the complete reaction of 5.5 moles of C3H8? (Only enter the number, NO UNITS, and round to the tenth place, 1 decimal) Given: C3H8 + 5 O2 → 3 CO2. + 4 H2O
Answer:
22
Explanation:
5.5 mol C3H8 • (4 mol H2O / 1 mol C3H8 ) = 22 mol H2O
A 33.0g sample of glass, which has a specific heat capacity of 0.670·J·g−1°C−1, is dropped into an insulated container containing 200.0g of water at 70.0°C and a constant pressure of 1atm. The initial temperature of the glass is 7.6°C. Assuming no heat is absorbed from or by the container, or the surroundings, calculate the equilibrium temperature of the water. Be sure your answer has 3 significant digits.
Answer:
68.4°C is the final temperature of the water
Explanation:
In this problem, the heat lost by the water is equal to the heat lost by the sample of glass, that is:
W(Gl)*S(Gl)*ΔT(Gl) = W(H₂O)*S(H₂O)*ΔT(H₂O)
Where W is mass (Gl = 33.0g; H₂O = 200.0g)
S is specific heat (Gl = 0.670J/g°C; H₂O = 4.184J/g°C)
And ΔT is change in temperature ( Gl = T-7.6°C; H₂O = 70.0°C-T)
Replacing:
33.0g*0.670J/g°C*(T-7.6°C) = 200.0g*4.184J/g°C*(70.0°C-T)
22.11*(T-7.6) = 836.8*(70.0-T)
22.11T - 168.04 = 58576 - 836.8T
858.91T = 58744.04
T = 68.4°C is the final temperature of the water
I am an element that has 4 valence electrons that are present in my third energy level. Who am I?
Answer:
silicone (Si) is the answer
Determine if each compound shown is soluble or insoluble.
Drag the appropriate items to their respective bins.
The solubility rules shows which compounds are soluble in water.
According to the solubility rules, all chlorides and bromides are soluble in water except those of silver and mercury. This explains why most of the chlorides and bromides are designated as "soluble".
All nitrates are also soluble in water. The hydroxide of copper is not soluble in water as well as the sulfates of divalent group II elements.
In summary, the soluble and insoluble elements are shown as follows;
1) Soluble
FeCl3KNO3KClCu(NO3)2NaClKBr2) Insoluble
BaSO4Cu(OH)2AgClLearn more: https://brainly.com/question/24846690
Please tell 4 strong alkalis and 4 weak alkalis
Red: weak
Orange: Strong
3) How many grams of calcium hydroxide are necessary to create 49.5 mL of a 1.55 M solution?
Answer:
5.68g
Explanation:
NH3(g) + O2(g) + CH4(g) → HCN(aq) + H20(l)
Answer:
2 NH3(g) + 3 O2(g) + 2 CH4(g) = 2 HCN(aq) + 6 H2O(l)
Explanation:
Reaction stoichiometry Limiting reagent
Compound Coefficient Molar Mass Moles Weight
NH3(g) 2 17.03052
O2(g) 3 31.9988
CH4(g) 2 16.04246
HCN(aq) 2 27.02534
H2O(l) 6 18.01528
Instructions on balancing chemical equations:
Enter an equation of a chemical reaction and click 'Balance'. The answer will appear below
Always use the upper case for the first character in the element name and the lower case for the second character. Examples: Fe, Au, Co, Br, C, O, N, F. Compare: Co - cobalt and CO - carbon monoxide
To enter an electron into a chemical equation use {-} or e
To enter an ion specify charge after the compound in curly brackets: {+3} or {3+} or {3}.
Example: Fe{3+} + I{-} = Fe{2+} + I2
Substitute immutable groups in chemical compounds to avoid ambiguity.
For instance equation C6H5C2H5 + O2 = C6H5OH + CO2 + H2O will not be balanced,
but PhC2H5 + O2 = PhOH + CO2 + H2O will
Compound states [like (s) (aq) or (g)] are not required.
If you do not know what products are enter reagents only and click 'Balance'. In many cases a complete equation will be suggested.
Reaction stoichiometry could be computed for a balanced equation. Enter either the number of moles or weight for one of the compounds to compute the rest.
Limiting reagent can be computed for a balanced equation by entering the number of moles or weight for all reagents.
The given chemical equation is already balanced and does not require any further balancing.
The chemical equation NH₃(g) + O₂(g) + CH₄(g) → HCN(aq) + H₂O(l) is already balanced because the number of atoms of each element is the same on both sides of the equation.
On the left side of the equation, there is 1 nitrogen (N) atom in NH₃ and 1 nitrogen (N) atom in HCN.
On the right side of the equation, there are 3 hydrogen (H) atoms in NH₃, 2 hydrogen (H) atoms in HCN, and 2 hydrogen (H) atoms in H₂O.
There are 3 oxygen (O) atoms in O₂ on the left side of the equation and 1 oxygen (O) atom in H₂O on the right side of the equation.
Finally, there is 1 carbon (C) atom in CH₄ on the left side of the equation.
Since the number of atoms of each element is balanced on both sides of the equation, we can conclude that the given equation is already balanced and does not require any further adjustments or coefficients.
To learn more about balanced equation, here
https://brainly.com/question/31242898
#SPJ2
The complete question is:
How can I balance NH₃(g) + O₂ (g) + CH₄ (g) -> HCN (aq) + H₂O (l)?
what mass of sodium hydroxide is needed to neutralise 24.5kg of sulfuric acid
H2SO4 + N2 = 2NH3
Answer:
23.92 g
Explanation:
Molar mass of H2SO4 = (2×1)+32+(16×4)= 2+32+48= 82g/mol
H2SO4 + 2NaOH ---> Na2SO4 + 2H2O
I mole of H2SO4 = 2 moles of NaOH
24.5/82 = 24.5/82 × 2
= 0.598 moles of NaOH will neutralize
Mass= mole× molar mass
Molar mass of NaOH= 23+16+1 = 40g/mol
Mass= 0.598 × 40 = 23.92g of NaOH
Answer:
20g
Explanation:
First of all, you have got your formula wrong. It should be [tex]H_{2}SO_{4} + 2NaOH = Na_{2}SO_{4} + 2H_{2}O[/tex].
Start by finding the Relative Formula Mass for sulfuric acid. [tex]H_{2}SO_{4}[/tex] is equal to (2x1)+32+(16x4)=98. You then calculate Mols by doing [tex]Mols=\frac{Mass}{Relative Formula Mass}[/tex]. So, [tex]\frac{24.5}{98} = 0.25[/tex], so the Mols of Sulfuric Acid is 0.25.
The Mol ratio of Sulfuric Acid to Sodium Hydroxide is 1:2, so 0.25:0.5.
Now, you have to find the Relative Formula Mass of Sodium Hydroxide, or [tex]NaOH[/tex]. 23+16+1=40. Finally, multiply 0.5 by 40, and you'll find that the maximum mass is 20g.
3.
Describe how photosynthesis is
related to respiration.
Answer: Photosynthesis converts carbon dioxide and water into oxygen and glucose. ... Cellular respiration converts oxygen and glucose into water and carbon dioxide. Water and carbon dioxide are by-products, and ATP is the energy that is transformed from the process.
A student needs 7.6 liters of a 0.18 molar solution for an experiment. How many grams of solute does the student need if the molar mass of the solute is 22.71 g/mol? Round your answer to the nearest 0.01
Answer:
31.07 g
Explanation:
First we calculate how many moles of solute would there be in 7.6 liters of a 0.18 molar solution, using the definition of molarity:
molarity = moles / volume0.18 M = moles / 7.6 Lmoles = 1.368 molNow we calculate the mass of 1.368 moles of solute, using the given molar mass:
1.368 mol * 22.71 g/mol = 31.07 gwhy fermentation carried temperature in range of 30 to 40°C
Answer:
i dont kno
Explanation:
Explanation:
As temperature increases, fermentation rate accelerates. With increased fermentation rate, more aromatic compounds are produced because the metabolic intermediates are excreted from the yeast cells just like people getting sweaty and stinky during vigorous exercise.
A double replacement reaction is a chemical reaction between two ionic compounds in which ions are interchanged to form two new compounds
a. True
b. False
Answer: True
Explanation:
The statement that "A double replacement reaction is a chemical reaction between two ionic compounds in which ions are interchanged to form two new compounds" is true.
We should also note that a double replacement reaction can also be referred to as a metathesis reaction. In such cases, the ions of the compounds involved will be exchanged in order for a new compound to be formed. An example of a metathesis reaction is:
FeSO4 + CuCl2 = FeCl2 + CuSO4
