4. In the following reaction: 2NaN3 decomposes to form 2Na + 3N2. If 500 grams of NaN3 decomposes to form 320 grams of Na, how much Na is produced?
180 grams
320 grams
500 grams
Some vitamins and dietary supplements are stored in opaque, darkened
bottles to protect them from UV light because UV light would cause a
reaction. Which word could be used to describe UV light in this situation?
O A. Catalyst
B. Enzyme
C. Solvent
D. Reactant
The correct option for the given question about Harmfull effect of UV light is Option D) Reactant.
Why UV light is so harmfull for some vitamins?In general, temperature, oxygen, and light impacts on vitamins and minerals are sensitive. A nutrient can lose its biological potency if its molecular structure is slightly altered.Numerous vitamins, including vitamin A, vitamin B2 (riboflavin), vitamin B6, vitamin B12, and folic acid, are known to be particularly susceptible to UV radiation oxidation.Additionally, light speeds up the negative interactions between vitamins.For instance, the combination of riboflavin and light together speeds up the breakdown of both folic acid and vitamin C. This is what causes milk that has been exposed to light to lose vitamin C.Thus to conclude we can say that UV light damages some vitamins by reacting with them.
Learn more about Harmfull effect of UV light here:
https://brainly.com/question/11126315
#SPJ2
What pressure is exerted by 1.11 mol of hydrogen gas in a 8.17 L container at 50◦C?
Answer in units of atm.
Answer:
20.0
Explanation:
20
very very very very very very very very hard
Determine which molecule in each pair has the stronger intermolecular forces. Explain why. The main reason that NH3 has [ Select ] intermolecular forces than CH4 is that NH3 [ Select ] . The main reason that NO2 has [ Select ] intermolecular forces than CO2 is that NO2 [ Select ] . The main reason that CS2 has [ Select ] intermolecular forces than CO2 is that CS2 [ Select ] .
Answer:
See explanation
Explanation:
As for NH3 and CH4, the former is a polar molecule and possess a dipole. Hence, in addition to dispersion forces, dipole-dipole interaction as well as hydrogen bonding creates a stronger intermolecular interaction than in nonpolar CH4 where only dispersion forces are in operation.
Between NO2 and CO2, the former possesses a dipole moment while the later does not. As a result of that, dipole interaction are in operation in NO2 while only dispersion forces are n operation in CO2.
Between CO2 and CS2, the both molecules are nonpolar but CS2 has a greater molecular mass than CO2. Recall that the greater the molecular mass of a substance the greater its magnitude of intermolecular forces.
Taking into account the intermolecular forces, you get that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Intermolecular forces or bonds are those interactions that hold molecules together. These are electrostatic forces.
Van der Waals forces are weak attractions that hold electrically neutral molecules together. At some point these molecules present an induced dipole, that is, the molecule acquires a partially positive and a partially negative charge momentarily, causing them to attract each other. They are Van de Waals forces: Dipole - Dipole Forces, London Forces, Ion - Dipole Forces.
London Dispersion Forces: occurs between nonpolar molecules due to the movement of electrons. At some point there are more electrons to one side, which, being close to another atom or molecule, the electrons of the second are repelled, originating two instantaneous dipoles, which originate an attractive force. In summary, this type of force occurs because when two molecules approach, a distortion of the electronic clouds of both is originated, generating in them, transient induced dipoles, due to the movement of the electrons, thus allowing them to interact with each other. They are very weak forces.Ion-ion forces: It is the attraction between two ions of different charges: cations (positively charged ion) and anions (negatively charged ion). That is, it occurs between different charged molecules that will tend to form an electrostatic bond between the ends of opposite charges due to the attraction between them.Ion-dipole forces: these are forces of attraction between an ion (an atom that has lost or gained an electron, so it has a charge) and a polar molecule. A molecule is a dipole when there is an asymmetric distribution of electrons because the molecule is made up of atoms of different electronegativity. The ion then binds to the part of the molecule that has its opposite charge: the positive end of the polar molecule is oriented towards the anion (negatively charged ion) and the negative end of the polar molecule is oriented towards the cation ( positively charged ion).Dipole-dipole forces: dipole-dipole forces are forces of attraction between polar molecules. These molecules attract when the positive end of one of them is close to the negative of the other.Hydrogen bonds: they are a type of dipole-dipole force. In this interaction, a molecule that presents hydrogen interacts with another that presents an atom with high electronegativity, such as oxygen, fluorine or nitrogen (O, F, N). In this way, between the hydrogen, which has a low electronegativity and the electronegative atom, an interaction is established, due to their opposite charges.The relative order of magnitude of the intermolecular forces is:
Ion-ion forces> Ion-dipole forces> Hydrogen bonds> Dipole-dipole forces> London Dispersion Forces
Taking into account all the above, it can be said that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Learn more:
https://brainly.com/question/17111432?referrer=searchResultshttps://brainly.com/question/14220340?referrer=searchResultsHow many molecules is 7.22 mole H2O
Answer:
no H2O molecules are produced:)
Explanation:
Answer: 18 g of water occupies one mole and one mole contains Avagadro’s no. of molecules = 6.023*10^23 molecules .
Explanation:question says 72 g of water . 72 g of water occupies 4 moles.
So the no. of molecules in 72 g of water has 4*(6.023*10^23) molecules .
Zr + O ⇒
B + O ⇒
Zn + C ⇒
Co + I ⇒
Mg + Br ⇒
WHAT- WHAT GRADE R YOU IN 0,0
pls show ur work will mark the brainliest
Answer:
M = 0.47
Explanation:
1 - Turn grams to moles using molar mass:
16g NaOH × 1 mol NaOH / 40g NaOH = 0.4 mol NaOH
2- Turn milliliters to liters:
855mL × 1 L / 1000mL = 0.86 L
3- Use formula which is M = moles of solute / liters of solvent:
M = 0.4 mol NaOH / 0.86 L = 0.47
PLEASE HELO DOES ANYONE KNOW THE RIGHT ANSWER ??
Answer:
the last one because matter is the amount of space
Waves that we cannot actually see (unlike ripples in water) and that DO NOT need a medium to travel through belong to which category of waves?
Answer:
electromagnetic waves
Explanation:
The waves that do not need a medium to travel through are known as electromagnetic waves.
What are electromagnetic waves?These waves do not need any medium for their propagation or traveling. The waves have different wavelength and energy factors depending upon their rate of propagation. EMR waves travel from the sun to the earth in space.
Examples of electromagnetic waves are Xrays, gamma rays, radio waves, and more.
Find more information about electromagnetic waves here:
brainly.com/question/25847009
What are the mole ratios of the following chemical equation: C3H8 + 5O2 --> 3CO2 + 4H2O?
Answer:Redox and combustion.
Explanation:
C3H8) reacts with oxygen in the air, so C3H8(g) + 5O2(g) = 3CO2(g) + 4H2O(g) Classification: Redox and combustion.
65 g of NaOH is dissolved to make 500 mL of solution. Find moles of NaPH and Molarity of solution.
Answer:
3.25 M
Explanation:
Number of moles = mass/ molar mass
mass of NaOH = 65 g
Molar mass of NaOH = 40 g/mol
Number of moles of NaOH = 65g/40 g/mol = 1.625 moles
Let us recall that;
n = CV
n = number of moles of solute
C = concentration of solution
V = volume of solution
C = n/V
n = 1.625 moles
V = 500/1000 L = 0.5 L
C = 1.625 moles/0.5
C = 3.25 M
How does temperature affect the spontaneity of a reaction?
A. Increasing the temperature always makes a reaction less likely to
be spontaneous
B. Increasing the temperature will not affect the spontaneity of a
reaction.
C. Increasing the temperature always makes a reaction more likely to
be spontaneous.
D. Increasing the temperature makes a reaction spontaneous in
some situations.
Answer:
D
Explanation:
took the test
The statement 'increasing the temperature makes a reaction spontaneous in some situations' indicates how temperature affects the spontaneity of a reaction.
What is a chemical reaction?A chemical reaction is a given process in which one or more reactants are converted into different products.
A chemical reaction is composed of catalysts such as enzymes that speed up its velocity.Temperature represents a fundamental variable in a chemical reaction.In conclusion, the statement 'increasing the temperature makes a reaction spontaneous in some situations' indicates how temperature affects the spontaneity of a reaction.
Learn more in:
https://brainly.com/question/1156488
what are some ways that you can change the physical phase of matter?
How does matter change from one state to another
Answer:
Adding or removing energy can change the physical matter.
Explanation:
Like for example changing temperature
Why is Chemistry so hard? And why is it required when most of us aren't going to use it after high school?
Read the sentence from "Black Hole Beginnings."
As more stuff gathers, its combined gravitation grows stronger.
What question should readers ask to determine the effect in the sentence?
How much stuff is combined?
Where does the stuff gather?
Why does the gravitation grow stronger?
What happens when more stuff gathers?
Answer: the answer Is d
Explanation:
The question that readers should ask to determine the effect in the sentence is that what happens when more stuff gathers?
What is a sentence?Sentence is defined as a group of words, usually containing a subject and a verb, expressing a statement, question, instruction, or exclamation, and, when written, starting with a capital letter and ending with a period or other mark, example, Your sentences are too long and complicated.Many sentences written together form a paragraph.
In law, a punishment is which is given by a law court to a person or organization that is guilty of a crime. It is a grammatical unit of one or more words that expresses an independent statement, question, request, command, exclamation, etc.
In print or writing, a sentence typically begins with a capital letter and ends with appropriate punctuation; in speech it displays recognizable, communicative intonation patterns and is often marked by preceding and following pauses.
Learn more about sentence,here:
https://brainly.com/question/16890064
#SPJ6
9. Which indicator would show a pH change from 6 to 7?
Phenol red indicator
Blue litmus indicator
Red litmus indicator
Methyl red indicator
Will give brainliest!!!!
Answer:
hi
Explanation:
because
State one type of additional information that could be used to determine if these three species are closely related.
Answer:
Study the bone structure of limbs.
Explanation:
Study the bone structure of limbs can be used to find out the relatedness and relationship among three species because the pattern of bones structure is similar but the structure is different from one another due to different environmental conditions. This study provides important and useful information whether the three species are closely related or not. If they have similar bone structure than we can say that there are more chances that they are closely related to each other.
If 12 moles of Al2O3
are produced, how many moles of aluminum reacted?
Answer:
if 12 moles are produced then it came 24 moles of Al(OH)3
Explanation:
The number that is written in front of the molecule is called stoichiometry, represents the number of mole of that molecule. 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
What is stoichiometry?Stoichiometry is a part of chemistry that help us in making relationship between reactant and product from quantitative aspects. It tells about how much part of reactant will be required to produce particular product. Unitary method is always applied in case of stoichiometry chemistry.
The balanced equation is
[tex]4Al+3O_{2}\rightarrow 2Al_{2}O__{3}[/tex]
The mole ratio between [tex]Al_{2}O__{3}[/tex] and Al is 2:4, means to produce 4 moles of [tex]Al_{2}O__{3}[/tex] we need 2 moles of Aluminum
4 mole of [tex]Al_{2}O__{3}[/tex]= 2 moles of Aluminum
1 mole of [tex]Al_{2}O__{3}[/tex]=(1÷2) moles of Aluminum
12 moles of [tex]Al_{2}O__{3}[/tex]= 24 mole of Aluminum
Therefore 12 moles of [tex]Al_{2}O__{3}[/tex] is produced by 24 mole of Aluminum.
To learn more about stoichiometry, here:
https://brainly.com/question/28780091
#SPJ2
Estructura correcta de los siguientes compuestos e indique si el nombre está escrito de forma correcta; 1,4-ciclohexadieno
Answer:
En la imagen adjunta.
Explanation:
¡Hola!
En este caso, dados los lineamientos IUPAC que tenemos en cuenta para dibujar la estructura de hidrocarburos cíclicos, para el 1,4-ciclohexadieno, es posible determinar que esta estructura viene dada por hexágono que representa el ciclohexano y dos dobles enlaces en los carbonos 1 y 4 al ser un dieno. Por lo anterior, en la imagen adjunta, puede encontrar la estructura requerida.
¡Saludos!
Which statement is correct?
Natural processes happen spontaneously when they decrease the entropy of a system because entropy increase is counteracted by the flow of enthalpy from high temperatures to low temperatures.
Among solids, liquids, and gases, solids generally have the highest entropy because solid particles are the least mobile, and entropy is inversely related to mobility of particles.
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Dissolving table salt (NaCl) in water leads to a decrease in entropy because salt particles, which are numerous individual crystals in solid form, become a homogenous solution in water.
Answer:
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Explanation:
Imagine dropping a glass pitcher on a hard surface. The pitcher breaks into numerous shards. If the shards were collected and dropped again, they would tend to break into smaller shards; they would not reassemble themselves into a pitcher. In the universe, there is a tendency for order to be replaced with disorder. This tendency is related to a concept called entropy. The formal definition of entropy is a measure of the degree of randomness and disorder in a system.
Can someone help me pls?
Zr + O ⇒
B + O ⇒
Zn + C ⇒
Co + I ⇒
Mg + Br ⇒
Explanation:
tttttttttttttttttttttttt
Why do you think we use heat to dissolve sodium tetraborate?
Answer:
Explanation:90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u this is irrelevent but idrc lol
46 POINTS!!! help me with chemistry, please!
Water Sugar Lemon Juice Lemonade Percent Yield Leftover Ingredients
946.36g 196.86g 193.37g 719.84g 95% Water and Sugar
4. Try to reduce the amount of leftover ingredients by changing the amount of one, two, or all three starting ingredients. Show your stoichiometric calculations below.
5. During factory inspection, Just Lemons, Inc. discovered that a water valve to the lemonade mixing station was not functioning. Once they repair it, more water will enter the mixing station. From what you know about the limiting and excess ingredients for current lemonade production, what advice would you give engineers about the upcoming increase in water?
Answer:
are you sure it is 95%?????
Explanation:
a sample of gas X occupies 10 m^3 at a pressure of 120 kPa.if the volume of the sample is compressed to 3m^3 ,what is the new pressure of the gas?
Answer:
400 kPaExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we're finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
120 kPa = 120,000 Pa
We have
[tex]P_2 = \frac{120000 \times 10}{3} = \frac{1200000}{3} \\ = 400000[/tex]
We have the final answer as
400,000 Pa = 400 kPaHope this helps you
Five liters of air at -35°C is warmed to 89°C. What is the new volume if the pressure remains constant
Answer:
7.61 liters
Explanation:
From the question,
Applying Charles law formula,
V₁/T₁ = V₂/T₂...................... Equation 1
Where P₁ = initial volume of of air, V₂ = Final volume of air, T₁ = Initial Temperature of air, T₂ = Final Temperature of air.
make V₂ the subject of the equation
V₂ = (V₁×T₂)/T₁............... Equation 2
Given: V₁ = 5 liters, T₁ -35 °C = (-35+273) K = 238 K, T₂ = 89°C = (89+273) K = 362 K
Substitute these values into equation 2
V₂ = (5×362)238
V₂ = 1810/238
V₂ = 7.61 liters
???????????????????????
Answer:
B and D
Explanation:
Bc it has more fat than the other
PLEASE I NEED HELP ILL GIVE BRAINLYEST
What percentage increase did CO2 experience from 1800 to 2004 AD?
The percentage of CO2 increased 48 percent. Hope this helped!
Genetic material (_____) is passed from cell to cell.
Answer:
DNA
Explanation:
Genetic material DNA is passed from cell to cell.
What is DNA?DNA is Deoxyribonucleic acid. It is a polymer composed of two polynucleotide chains. These chains coil around each other to form a double helix. The polymer carries genetic instructions for the development, functioning, growth and reproduction of all known organisms and many viruses. It keeps on transferring from generation to generation. Two types of Nucleic acids are DNA and ribonucleic acid.
In DNA, 4 bases are present that are Adenine, Guanine, Cytosine and Thymine. Whereas Thymine is replaced by Uracil in case of RNA.
These bases are connected by hydrogen bonds with each other.
The configuration of the DNA molecule is highly stable, allowing it to act as a template for the replication of new DNA molecules, as well as for the production (transcription) of the related RNA (ribonucleic acid) molecule.
Therefore, Genetic material DNA is passed from cell to cell.
Learn more about DNA here:
https://brainly.com/question/264225
#SPJ3
Which gas law would apply to the following scenario.
A family is going to a party in the mountains (no change in temperature). It was their job to bring balloons. By the time they arrived 2 of the balloons had
popped,
Gay-Lussac's Law
Boyle's Law
Charles Law
Avogadro's Law
