Answer:
3.2 g/cm3
Explanation:
Mass = 253 g
Volume = 80.0 cm3
Density = Mass / Volume = 253 g / 80.0 cm3
Density = 3.1625 g/cm3
The precision rule means the answer must not have more significant values than the value with the least number of significant figures. In this case, the value with the least number of significant figures is 80.0 with two signiificant figures. Hence;
Answer = 3.2 g/cm3
Explain what you discovered from the Simulation about why food coloring spreads faster in warmer water.
Answer:
the water molecules have more energy and are moving faster than the molecules of cold water. This makes it easier for the dye to get mixed throughout the hot water.
Explanation:
Answer:
Because particles moves more by kinetic energy and diffusion will spread with the particles
Explanation:
How does molecular formula differ from empirical formula and structural
formula? Cite an example.
Answer:
Empirical formulas show the simplest whole-number ratio of atoms in a compound, molecular formulas show the number of each type of atom in a molecule, and structural formulas show how the atoms in a molecule are bonded to each other.
Explanation:
this is the correct answer you want
please follow me ☺️.
sound travels 1,500 m/s through water at 25 degrees celciesunder these conditions how long would it take to travel 300m
Answer:
[tex]v = s \div t[/tex]
[tex]t = s \div v[/tex]
[tex]t = 300 \div 1500 = 0.2s[/tex]
What type of cloud produces severe weather like thunderstorms, thunder
and lighting, occasional hail, and possibly tornadoes?
Answer:
The cumulonimbus cloud
Explanation:
The cumulonimbus cloud, or thunderstorm, is a convective cloud or cloud system that produces rainfall and lightning. It often produces large hail, severe wind gusts, tornadoes, and heavy rainfall.
pls mark brainliest
Answer:
cumulonimbus clouds
Explanation:
that's the answer.
1 = 2 Amps, R = 3 Ohms, V = ? Volts
Answer:
6 volts
Explanation:
Use Ohm's Law:
V = IR
V = (2 amps)(3 ohms) = 6 volts
How many grams does 5.29 x 10^25 molecules of AgNO3 weigh?
14900 g AgNO₃
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 5.29 × 10²⁵ molecules AgNO₃
[Solve] grams AgNO₃
Step 2: Identify Conversions
Avogadro's Number
[PT] Molar Mass of Ag - 107.87 g/mol
[PT] Molar Mass of N - 14.01 g/mol
[PT] Molar Mass of O - 16.00 g/mol
Molar Mass of AgNO₃ - 107.87 + 14.01 + 3(16.00) = 169.88 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 5.29 \cdot 10^{25} \ molecules \ AgNO_3(\frac{1 \ mol \ AgNO_3}{6.022 \cdot 10^{23} \ molecules \ AgNO_3})(\frac{169.88 \ g \ AgNO_3}{1 \ mol \ AgNO_3})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 14923 \ g \ AgNO_3[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
14923 g AgNO₃ ≈ 14900 g AgNO₃
Why does concentration increase when the solvent evaporates?
Answer:
The concentration increases because the solution becomes more pure because the solvent leaves the solution.
Explanation:
Which of the following answers is true for the following statement?
The conjugate acid of a strong base is:
O aweak acid
O an amphiprotic acid
O a polyprotic acid
O a lousy (or very weak) acid
O a strong acid
it is either "aweak acid or a lousy (or very weak) acid"
Type the CONVERSION factor (fraction) to calculate the moles in 15.0 g
of potassium sulfide, K2S. *
10 points
Explanation:
5g C7H8 / 92g/mole = 0.054moles
total moles = 0.232moles
mole fraction C6H12 = 0.178moles / 0.232moles = 0.767
mole fraction C7H8 = 0.233
At point a the object has 30 joules of energy. how much energy does the object have at point b?
Answer:
It’s 10
Explanation:
I looked it up
To solve this we must be knowing each and every concept related to energy and its calculations. Therefore, at point b, 10joule of energy is present.
What is energy?Energy is defined in physics as the ability to accomplish work or heat items. It's a scalar measurement with magnitude but no direction. Energy is maintained, which implies it can change forms but is not generated or destroyed. potential energy transforms into kinetic energy.
One type of energy can be transferred into another without breaking a thermodynamic rule. Not all of these energy sources are equally beneficial in practical applications. At point a the object has 30 joules of energy. At point b, 10joule of energy is present.
Therefore, at point b, 10joule of energy is present.
To learn more about energy, here:
https://brainly.com/question/29763772
#SPJ5
Each person in a room is assumed to be producing carbon dioxide at the average rate of 0.0107 cfm (5.0 ml/s) and air with a CO2 concentration of 280 ppm is being supplied to the room at the rate of 6000 cfm (2.8 m3/s). It is desired to keep the concentration level of CO2 in the space below 1000 ppm. Assuming complete mixing, determine how many persons could occupy the room and not exceed the desired CO2 level.
Answer:
404 persons
Explanation:
To get n= number of persons
We use this formula
n = I(Dc - EaC)Eaf
I = 6000 = inflow rate
Dc = desired concentration = 1000
Eac = Exhaled air concentration = 280ppm = 0.00028
Exhaled air flow rate = Eaf = 0.0107
When we put values into the formula above
6000(0.001-0.00028)/0.0107
= 6000(0.00072)/0.0107
= 4.32/0.0107
= 403.7
= 404 persons
Aside from direct harm, what secondary issue do invasive species present?
They may be able to eat all kinds of native organisms.
They might introduce other organisms like viruses and bacteria.
They might damage the habitat that other organisms rely on.
They may not have any predators.
Answer:
B
Explanation:
HELPPP PLZz nowww!!!
A. C
B. B
C. A
D. D
Answer:
b
Explanation:
Answer:
answer b I think so I'm.not clear about it ,I think its CRT ans plz follow me
How many grams of MgCl2 would be needed to make 5.3 liters of a 0.25 molar solution? Round your answer to the nearest 0.01,
Answer: 126.1 grams of are needed to make 5.3 L of 0.25 M solution
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
To calculate the mass of solute for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{given mass of solute}}{\text {Molar mass of solute}\times \text{Volume of solution in L}}[/tex]
[tex]0.25M=\frac{x}{95.2g/mol\times 5.3L}[/tex]
[tex]x=126.1g[/tex]
Thus 126.1 grams of are needed to make 5.3 L of 0.25 M solution
Cells are made of cells true or false
false
cells are made up of nucleus and cytoplasm and it's contained within the cell membrane
A sample of gas at a pressure of 0.850 atm has a volume of 675 mL. What will the
volume be if the pressure is increased to 1.50 atm?
Answer:
382mL
Explanation:
Boyle's Law P₁V₁ = P₂V₂
(0.850atm)(675mL) = (1.50atm)(V₂)
573.75 = (1.50atm)(V₂)
V₂ = 573.75/1.50
V₂ = 382.5mL = 382mL
Which chemical element represents the most abundant “atoms of an element” found in air?
Answer:
The order of elements by volume-fraction (which is approximately molecular mole-fraction) in the atmosphere is nitrogen (78.1%), oxygen (20.9%), argon (0.96%), followed by (in uncertain order) carbon and hydrogen because water vapor and carbon dioxide, which represent most of these two elements in the air, are variable.
I copied and pasted but I hope this information is helpful :)
Small particles that settle out of wind and water are called.
If 95.0 g Zn is added to an excess of H2SO4, how many
liters of hydrogen gas will be produced at STP?
Write and balance the equation. Then, calculate the
liters of hydrogen produced.
Please help
Answer:
32.7 L of H₂
Explanation:
We'll begin by calculating the number of mole in 95 g of Zn. This can be obtained as follow:
Mass of Zn = 95 g
Molar mass of Zn = 65 g/mol
Mole of Zn =?
Mole = mass /Molar mass
Mole of Zn = 95/65
Mole of Zn = 1.46 mole
Next, we shall determine the number of mole of H₂ produced by the reaction of 95 g (i.e 1.46 mole) of Zn. This can be obtained as illustrated below:
Zn + H₂SO₄ —> ZnSO₄ + H₂
From the balanced equation above,
1 mole of Zn reacted to produce 1 mole of H₂.
Therefore, 1.46 mole of Zn will also react to produce 1.46 mole of H₂.
Finally, we shall determine the volume of H₂ obtained at STP. This can be obtained as follow:
1 mole of H₂ = 22.4 L at STP.
Therefore,
1.46 mole of H₂ = 1.46 × 22.4
1.46 mole of H₂ = 32.7 L at STP
Thus, 32.7 L of H₂ were obtained from the reaction.
HELP I DON'T HAVE TIME LEFT
Answer:
mass
Explanation:
Answer:
C Mass
Explanation:
mass wont change when a force is put upon it.
What is the pH of this solution?
Answer:
pH = 11.216.
Explanation:
Hello there!
In this case, according to the ionization of ammonia in aqueous solution:
[tex]NH_3+H_2O\rightleftharpoons NH_4^++OH^-[/tex]
We can set up its equilibrium expression in terms of x as the reaction extent equal to the concentration of each product at equilibrium:
[tex]Kb=\frac{[NH_4^+][OH^-]}{[NH_3]} \\\\1.80x10^{-5}=\frac{x*x}{0.150-x}[/tex]
However, since Kb<<<1 we can neglect the x on bottom and easily compute it via:
[tex]1.80x10^{-5}=\frac{x*x}{0.150}\\\\x=\sqrt{1.80x10^{-5}*0.150}=1.643x10^{-3}M[/tex]
Which is also:
[tex][OH^-]=1.643x10^{-3}M[/tex]
Thereafter we can compute the pOH first:
[tex]pOH=-log(1.643x10^{-3}M)\\\\pOH=2.784[/tex]
Finally, the pH turns out:
[tex]pH=14-2.784\\\\pH=11.216[/tex]
Regards!
What happens after coral is bleached?
It produces peroxides.
It releases algae into the ocean.
It dies immediately.
It is susceptible to starvation
Mention two functions performed by the concentrated sulfuric acid in the reaction
Answer:
Concentrated sulfuric acid is used as a catalyst, and has a dual role:
-Speeds up the reaction.
-Acts as a dehydrating agent, forcing the equilibrium to the right and resulting in a greater yield of ester.
The two functions performed by the concentrated sulfuric acid in the reaction is that Concentrated sulphuric acid often removes molecules of water from formic acid and it acts as a dehydrating agent in creation of carbon monoxide.
The function of the concentrated sulfuric acid in a reaction is that Concentrated sulfuric acid can be used as a catalyst.
It help to Speeds up the reaction and can also be a dehydrating agent, by bringing in the equilibrium to the right and leading to a greater yield of ester.
learn more about sulphuric acid from
https://brainly.com/question/4018599
A student is given an antacid tablet that weighs 5.4630 g. The tablet is crushed and 4.3620 g of the antacid is added to 200. mL of simulated stomach acid. It is allowed to react and then filtered. It is found that 25.00 mL of this partially neutralized stomach acid required 13.6 mL of a NaOH solution to titrate it to a methyl red end point. It takes 27.7 mL of this NaOH solution to neutralize 25.00 mL of the original stomach acid. How much of the stomach acid (in mL) has been neutralized in the 25.00 mL sample that was titrated
Solution :
It is given that :
Weight of the antacid tablet = 5.4630 g
4.3620 gram of antacid is crushed and is added to the stomach acid of 200 mL and is reacted.
25 mL of the stomach acid that is partially neutralized required 13.6 mL of NaOH to be titrated for a red end point.
27.7 mL of [tex]$NaOH$[/tex] solution is equivalent to [tex]$25 \ mL$[/tex] of the original stomach acid. Therefore, 13.6 mL of NaOH will take x [tex]$\frac{25\text{ mL of original stomach acid}}{\text{27.7 mL of NaOH}}$[/tex]
= 12.27 ml of the original stomach acid.
People can hear ultrasound easily.
A. True
B. False
what is the total pressure in a 10.0L flask which contains 0.200mol of H2 and 0.215mol of N2
Answer:
0.998 atm.
Explanation:
NOTE: The temperature is missing in the above question and the value is 20 °C
From the question given above, the following data were obtained:
Volume (V) = 10.0 L
Number of mole of H₂ = 0.2 mole
Number of mole N₂ = 0.215 mole
Temperature (T) = 20 °C
Total pressure (P) =?
Next, we shall determine the total number of mole in flask. This can be obtained as follow:
Number of mole of H₂ = 0.2 mole
Number of mole of N₂ = 0.215 mole
Total number of mole (n) =?
n = mole of H₂ + mole of N₂
n = 0.2 + 0.215
n = 0.415 mole
Thus, the total number of mole in the flask is 0.415 mole
Next, we shall convert 20 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Temperature (T) = 20 °C + 273
Temperature (T) = 293 K
Finally, we shall determine the total pressure in the flask. This can be obtained as follow:
Volume (V) = 10.0 L
Total number of mole (n) = 0.415 mole
Temperature (T) = 293 K
Gas constant (R) = 0.0821 atm.L/Kmol
Total pressure (P) =?
PV = nRT
P × 10 = 0.415 × 0.0821 × 293
Divide both side by 10
P = (0.415 × 0.0821 × 293) / 10
P = 0.998 atm.
Therefore, the total pressure in the flask is 0.998 atm.
What is the meaning of ground state energy?
hope it helps you ❣❣
Mark me as brainliest
how many grams of P3O9 contain 9.67x10^23 atoms of oxygen?
Answer:
49.1 g
Explanation:
First we convert 9.67x10²³ atoms of oxygen into moles, using Avogadro's number:
9.67x10²³ atoms ÷ 6.023x10²³ atoms/mol = 1.60 mol OThen we calculate how many P₃O₉ moles there would be with 1.60 O moles:
1.60 mol O * [tex]\frac{1molP_3O_9}{9molO}[/tex] = 0.18 mol P₃O₉Finally we convert 0.18 P₃O₉ moles into grams, using its molar mass:
0.18 mol P₃O₉ * 237 g/mol = 49.1 gFor each molecule, specify the polarity of the bonds and the overall polarity of the molecule.
A. A central beryllium atom is connected to two chlorine atoms through single bonds.
B. Each chlorine atom has three lone pairs of electrons.
C. A central oxygen atom is connected to two hydrogen atoms through single bonds.
D. There are two lone pairs of electrons around the oxygen atom.
Are the bonds for each one polar or non polar? Are the molecules for each one polar or non polar?
A. BeCl2
B. H2O
C. O3
Answer:
See explanation
Explanation:
We know that the possession of polar bonds does not make a molecule polar. The BeCl2 molecule has Be-Cl bonds which are polar. However, the molecule is symmetrical and has a zero net dipole moment hence the molecule is nonpolar.
H2O is a polar molecule. It has polar O-H bonds. The molecule is bent and has a resultant dipole moment hence it is polar.
Ozone is a triatomic molecule which is bent in shape. This bent geometry creates an overall dipole moment in the molecule, hence the molecule is polar.
Which of the following represents a beta decay?
O A. 220/86 Rn → 294/84Po + 4/2 He
O B. 60/28 Ni → 60/28 Ni + y
C. 235/93 Np → 23/91 Pa+ x
O D. 213/83 Bi → 214/84 Po+0/-1e
Answer:
Option D
Explanation:
Parent isotope has 83 protons, daughter isotope has only one more proton (84). Beta particle is very small, atomic mass of 212 stays the same in beta decay.
[tex]^2^1^2_8_3Bi\;\rightarrow\;^2^1^2_8_4Po\;+\;^0_-1e[/tex] represents a beta decay. Parent isotope has 83 protons, daughter isotope has only one more proton (84). Beta particle is very small, atomic mass of 212 stays the same in beta decay.
What beta decay?In nuclear physics, beta decay (β-decay) is a type of radioactive decay in which a beta particle (fast energetic electron or positron) is emitted from an atomic nucleus, transforming the original nuclide to an isobar of that nuclide.
[tex]^2^1^2_8_3Bi\;\rightarrow\;^2^1^2_8_4Po\;+\;^0_-1e[/tex]
In beta decay, one of the neutrons in the nucleus suddenly changes into a proton, causing an increase in the atomic number of an element.
Hence, option D is correct.
Learn more about beta decay here:
https://brainly.com/question/25455333
#SPJ2
