Answer:
v = 2683.33 m/s
Explanation:
The magnetic force and the electric force on the electron must be the same, in order for them to cancel each other:
[tex]Electric\ Force = Magnetic\ Force\\Eq = qvBSin\theta \\\\v = \frac{E}{BSin\theta}[/tex]
where,
v = velcoity of electron = ?
E = Electric Field = 3059 V/m
B = Magnetic Field = 1.14 T
θ = Angle between velocity and magnetic field = 90°
Therefore,
[tex]v = \frac{3059\ V/m}{(1.14\ T)Sin90^o}[/tex]
v = 2683.33 m/s
When carbon bonds with oxygen,
what
gas is formed?
When carbon bonds with oxygen, what gas is formed?
Answer:
Carbon dioxide
Explination:
I remember it from biology.
I hope this helps ^-^
In a chemical reaction, carbon combines with oxygen to form carbon dioxide gas.
What is a chemical reaction?A chemical reaction can be defined as a process that causes the chemical transformation of one chemical substance to another. The chemical reactions accompany chemical changes that involve the rearrangement of electrons in the forming and breaking of bonds between atoms, with no change to the nuclei.
The substances which are primarily involved in a reaction are known as reactants or reagents. Chemical reactions are commonly characterized by a chemical change, and yield products, which exhibit properties different from the reactants.
Chemical reactions take place at a characteristic rate of reaction at a given temperature, pressure, and chemical concentration. The rates increase with the increasing temperature of the reaction when more thermal energy is available to achieve the activation energy for breaking bonds between atoms.
The combustion reaction takes place when carbon combines with oxygen to produce carbon dioxide gas.
Learn more about Chemical reactions, here:
https://brainly.com/question/22817140
#SPJ2
I've got this question, which option is correct?
Answer:
option c is the correct one
If a = 30 cm, b = 20 cm, q = +2.0 nC, and Q = –3.0 nC in the figure, what is the magnetude of the potential difference between A and B is
The magnitude of the potential difference between A and B is 195 V.
Potential of charge A
The potential of charge A is calculated as follows;
Va = kq/r
where;
k is Coulomb's constantq is magnitude of the charger is the position of the chargeVa = (9 x 10⁹ x 2 x 10⁻⁹) / (0.3)
Va = 60 Volts
Potential of charge BVb = kq/r
Vb = (9 x 10⁹ x -3 x 10⁻⁹) / (0.2)
Vb = -135 Volts
Potential between A and BVAB = VB - VA
VAB = -135 V - 60 V
VAB = -195 V
Thus, the magnitude of the potential difference between A and B is 195 V.
Learn more about potential difference here: https://brainly.com/question/9060304
#SPJ1
A basketball is at rest on the floor. It is heated with a Bunsen burner to make it warmer. A student argues
that the thermal energy in the basketball could be converted to kinetic energy and the basketball will
spontaneously move upwards. This claim violates which law of nature?
Answer:
Newton's first law of motion - The law of inertia
Explanation:
The student's claim violates Newton's first law of motion which states that a body will continue in its state of rest or uniform motion except a force is applied to change that state of rest or uniform motion.
In the case of the student, no external force is applied to the basketball, so as to change its inertia, so it continues to stay in the same position. But, the student assumes that the kinetic energy of the ball will change as its thermal energy can be converted to kinetic energy.
This is incorrect because, the thermal energy only raises the temperature of the basketball and thus the energy of the molecules of the ball, it cannot cause the kinetic energy of the basketball to change since it applies NO FORCE to be basketball so as to change its inertia.
5. During a heat transfer investigation, students filled two cups with water. One cup contains 100mL of cold water while the other contains 100 mL of hot water.
A metal heat wire is placed inside the water of both cups and thermometers are attached to each cup. Which of the following BEST explains how the heat is transferred? Cold Water Hot Water.
A. This investigation would not result in any heat being transferred.
B. Convection, because the metal wire was heated through convection currents.
C. Radiation, because the metal wire was heated by electromagnetic waves.
D. Conduction, because the metal wire was in direct contact with water in both containers.
Answer:
D.Conduction, because the metal wire was in direct contact with water in both containers
Conduction, because the metal wire was in direct contact with water in both containers. Option D is correct.
Given that,
Students filled two cups with water. One cup contains 100mL of cold water while the other has 100 mL of hot water. A metal heat wire is placed inside the water of both cups and thermometers are attached to each cup.
It is to be identified, the system contains which type of heat transfer between the cups
Heat transfer is the process, in a thermodynamic system, when an object at a higher temperature is placed with an object at has a lower temperature, after some time the system attains equilibrium because heat flows from higher temperature to lower temperature.
In the given question,
Cups, that are connected through a metal wire, one is hot and the other is cold, Principal of conduction state that when there is a system of connected bodies the heat flows throughout the connected system till the thermal equilibrium attain. Implies heat flow from hot cup to cold cup through the wire through conduction heat transfer.
Thus, Conduction, because the metal wire was in direct contact with water in both containers. Option D is correct.
Learn more about heat transfer here:
https://brainly.com/question/20699475
#SPJ2
Which statement is true for two pieces of iron at the same temperature ? A. The total kinetic energy of their particles is equal
The complete options are;
A. The average kinetic energy of their particles is the same.
B. The total kinetic energy of their particles is equal.
C. Heat flows from the larger object to the smaller object.
D. Heat flows from the object with higher potential energy to the object with lower potential energy.
Answer:
Explanation:
From the relationship between average kinetic energy and temperature, we have the formula;
E_k = (3/2)kT
Where;
k is a constant known as boltzmann constant.
T is known as temperature
We can see that at the same temperature (T), kinetic energy will remain the same because from the formula, E_k depends km only the temperature.
Thus, average kinetic energy of their particles saying that.
10 You are given the following list of vo-
lumes: 0.45 m3; 375 cm3; 75 cL; 0.6 dm3.
a. Express all the volumes of the list in
liters.
b. Arrange these volumes in a descending
order.
Volumes can be transfered to liters only when their measurement units are dm³. a) Which means that: 0.45m³=450dm³ you move the decimal place three places to the right because m³ is larger measurement unit than dm³. 375 cm³ = 0.375 dm³; 75cl = 0.75l because of the prefix centi. 0.6dm³ = 0.6 dm³
So it will be 450l; 0.375l; 0.75l; 0.6l
b) 450l>0.75l>0.6l>0.375l
0.45m³>75cl>0.6dm³>375cm³
I hope i didn't make a mistake, but it would be good if somebody else answered too, so you can compare the answers and see if i made a mistake
The given volumes in liter will be 450 L, 0.375 L, 0.75 L, 0.6 L and the arrangement in descending order will be 450 L > 0.75 L > 0.6 L > 0.37 L .
What is Volume?Every three-dimensional item takes up space in some way. The volume of this area is what is used to describe it. The area covered within an entity's three-dimensional bounds is referred to as its volume. The object's size is another name for it.
As per the given information in the question,
a.
The given volume in a meter cube is 0.45.
Unit conversion:
1 m³ = 1000 L
So, 0.45 m³ = 0.45 × 1000
= 450 L
The given volume in a centimeter cube is 375.
Unit conversion:
1 cm³ = 0.001 L
375 cm³ = 0.001 × 375
= 0.375 L.
The given volume in a centiliter cube is 75.
Unit conversion:
1 cl³ = 0.01 L
75 cl³ = 75 × 100
= 0.75 L
The given volume in the decimeter cube is 0.6.
1 dm³ = 1 L
0.6 dm³ = 0.6 L
b.
So, the volumes in descending order will be,
450 L > 0.75 L > 0.6 L > 0.37 L or,
0.45 m³ > 75 cl³ > 0.6 dm³ > 375 cm³
To know more about Volume:
https://brainly.com/question/13338592
#SPJ2
I WILL REPORT YOU IF YOU ANSWER WITH LINK!!! WILL GIVE BRAINLIEST
You have two identical bowling balls that are 1.00 m apart as measured from their centers. There is an attractive force of gravity between them due to their mass. When a net charge of +0.40 nC is placed on each bowling ball, the force exerted by the electrostatic forces exactly balances the force of gravity on the bowling balls resulting in a net charge of zero. The formula for the electrostatic force is similar to the formula for the gravitational force. There is a constant that is multiplied by the magnitude of each of the two charges and divided by the square of the distance between them. What two conclusions can you draw from this information?
CHOOSE 2 ANSWERS
Answer:
I think is is
Explanation:
B and C why because i have a gut feeling
The vector matrix [6 -2] is rotated at different angles. Match the angles of rotation with the vector matrices they produce.
Answer:
Hello your question is incomplete hence I will give you a general answer as regards rotation of vector matrix assuming angle of rotation = [tex]\frac{\pi }{4}[/tex]
answer :
angle of rotation = [tex]\frac{\pi }{4}[/tex]
vector matrix produced = attached below
Explanation:
lets assume the vector matrix [ 6, -2 ] is rotated clockwise by an angle of [tex]\frac{\pi }{4}[/tex]
The resultant matrix = attached below
Result of the rotation = attached below
attached below is the detailed solution
Answer: I got it right on Edmentum
Explanation: Answers attached below
Which explanation best describes a wave?
A.
a disturbance that travels through a medium with a transfer of energy and matter
B.
a disturbance that travels through a medium without a transfer of energy and matter
C.
a disturbance that travels through a medium with a transfer of energy and without a transfer of matter
D.
a disturbance that travels through a medium with a transfer of matter and without a transfer of energy
E.
a disturbance that travels only in the absence of a material medium
Answer:
D
Explanation:
A disturbance that travels through a medium with a transfer of matter and without a transfer of energy best describes a wave. Option D best describes a wave.
What is wave?A wave is a phenomenon that flows across a material medium without leaving any lasting mark. Mechanical or electromagnetic waves can be used to classify it. Transverse and longitudinal are the two main forms.
Wave motion that is parallel to the wave direction is described as longitudinal wave.
A wave is a disturbance that moves across a medium with a transfer of matter , but not an energy transfer.
A disturbance that travels through a medium with a transfer of matter and without a transfer of energy best describes a wave.
Hence, option D best describes a wave
To learn more about the wave, refer to the link;
brainly.com/question/3004869
#SPJ2
Types of RM radiation that make up the electromagnetic spectrum are microwaves, infrared light, ultraviolet light, X-rays, and gamma rays.
True
False
Answer:
True
Explanation:
The electromagnetic spectrum can be regarded as term that give description of range of light that are in existence, and this range from radio waves up to gamma rays. It can be explained as
range of frequencies that electromagnetic radiation takes with thier respective wavelengths as well as photon energies
The Types of electromagnetic radiation that make up the electromagnetic spectrum are
✓ microwaves
✓ infrared light
✓ ultraviolet light
✓X-rays,
✓gamma rays.
o reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 18 to 14 ft2. Assume the car is driven 12,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3, the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the engine to be 30 percent. Take the drag coefficient as CD
Complete question
To reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 18 to 14 ft2. Assume the car is driven 12,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3, the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the engine to be 30 percent. Take the drag coefficient as CD=0.3 for a passenger car.
Answer:
22.22%
$57
Explanation:
From the question we are told that
Initial area of frontal area [tex]a_1=18ft^2[/tex]
Final area of frontal area [tex]a_2=14ft^2[/tex]
Distance covered a year [tex]D=12000mile[/tex]
Average speed a year [tex]V_{avg}=55mile/h[/tex]
Density [tex]\rho=50 lbm/ft3[/tex]
Price [tex]P= $3.10/gal[/tex]
Density of air [tex]\rho_{air} 0.075 lbm/ft3[/tex]
Heating value of gasoline [tex]Q=20,000 Btu/lbm[/tex]
Efficiency [tex]\eta=30\%[/tex]
Drag coefficient [tex]CD=0.3[/tex]
[tex]\triangle A=18-14ft^2=4ft^2[/tex]
Generally the equation for drag force [tex]C_D[/tex] is mathematically given as
[tex]F_D=\frac{C_DAPV^2}{2}[/tex]
[tex]F_D=\frac{0.3*18*0.075*(80.685^2)*A}{2}[/tex]
[tex]F_D=73.24Alb[/tex]
where [tex]v=55mil/h*1.467=80.685ft/s[/tex]
Generally the equation for work done W is mathematically given as[tex]W=F_D*L[/tex]
where [tex]L=12000mile*5280[/tex]
[tex]L=63360000[/tex]
[tex]W=73.24A*63360000[/tex]
[tex]W=4.6*10^9A[/tex]
Generally the equation for overall efficiency [tex]\eta[/tex] is mathematically given as
where
[tex]W_{req}=required\ gasoline\ power\ efficiency[/tex]
[tex]\eta=\frac{W}{W_{req}}[/tex]
[tex]W_{req}=\frac{W}{\eta}[/tex]
[tex]W_{req}=\frac{4.6*10^9}{0.3}[/tex]
[tex]W_{req}=1.55*10^{10}A[/tex]
Generally the equation for reduction fee with change in frontal area [tex]\triangle M[/tex] is mathematically given as
[tex]\triangle M =\triangle Vgasoline*cost[/tex]
Where
[tex]\triangle Vgasoline= volume\ reduction\ of\ gasoline[/tex]
[tex]\triangle Vgasoline=\frac{E_{req}}{H*P}[/tex]
[tex]\triangle Vgasoline=\frac{1.55*10^{10}A}{20000*778.169*32.2*50}[/tex]
if
[tex]20000btu/ibm=20000*778.169*32.2(1bm.ft^2/s)[/tex]
[tex]\triangle Vgasoline=\frac{1.55*10^{10}A}{20000*778.169*32.2*50}[/tex]
[tex]\triangle Vgasoline=0.61859A[/tex]
Therefore
[tex]\triangle M =0.61859A*3.10[/tex]
if [tex]1ft^2=7.48gal[/tex]
[tex]\triangle M =0.61859(4)*3.10*7.48[/tex]
[tex]\triangle M = \$ 57.671[/tex]
Generally the equation for reduction of fuel [tex]F_r[/tex]is mathematically given as
[tex]F_r=\frac{\triangle A}{\triangle i}*100[/tex]
where
[tex]\triangle i=18ft^2[/tex]
[tex]F_r=\frac{4}{18}*100[/tex]
Fuel reduction price by reducing front area is 22.22%
Money saved per year is $57
Why is Alternating Current important
Explanation:
La corriente alterna es de gran importancia, entre otras cosas, porque nos proporciona la red eléctrica domiciliaria. Es aquella con la cual funcionan habitualmente los transformadores y un gran número de dispositivos.
The electron gun in a television tube uses a uniform electric field to accelerate electrons from rest to 4.1 x 10^7 m/s in a distance of 1.4 cm
Answer:
a = 6 x 10¹⁶ m/s²
Explanation:
The acceleration of the electrons can be found by using the third equation of motion:
[tex]2as = v_f^2-v_i^2[/tex]
where,
a = acceleration = ?
s = distance = 1.4 cm = 0.014 m
vf = final speed = 4.1 x 10⁷ m/s
vi = initial speed = 0 m/s
Therefore,
[tex]2a(0.014\ m) = (4.1\ x\ 10^7\ m/s)^2-(0\ m/s)^2\\\\a = \frac{1.681\ x\ 10^{15}\ m^2/s^2}{0.028\ m}[/tex]
a = 6 x 10¹⁶ m/s²
The acceleration of the electron will be a = 6 x 10¹⁶ m/s²
What is acceleration?The acceleration is defined as when the velocity of any moving object changes with respect to the time it is called as the acceleration.
The acceleration of the electrons can be found by using the third equation of motion:
[tex]2as=v_f^2-v_i^2[/tex]
where,
a = acceleration = ?
s = distance = 1.4 cm = 0.014 m
vf = final speed = 4.1 x 10⁷ m/s
vi = initial speed = 0 m/s
Therefore, By putting the values we will get
[tex]2a(0.014)=(4.1\times 10^7)-(0)[/tex]
[tex]a=\dfrac{1.681\times 10^{15}}{0.028}[/tex]
a = 6 x 10¹⁶ m/s²
Thus the acceleration of the electron will be a = 6 x 10¹⁶ m/s²
To know more about acceleration, follow
https://brainly.com/question/25749514
A star that is one of the coolest,
about 3,200°C, is going to be which
of the following colors?
Resourcos
A. greenish
Help
B. bluish
C. yellowish
D. reddish
Archerfish are tropical fish that hunt by shooting drops of water from their mouths at insects above the water’s surface to knock them into the water, where the fish can eat them. A 65-g fish at rest just at the surface of the water can expel a 0.30-g drop of water in a short burst of 5.0 ms. High-speed measurements show that the water has a speed of 2.5 m/s just after the archerfish expels it. What is the average force the fish exerts on the drop of water?
(a) 0.00015 N;
(b) 0.00075 N;
(c) 0.075 N;
(d) 0.15 N.
Answer:
(d) 0.15 N
Explanation:
mass of the fish, m₁ = 65 g = 0.065 kg
initial velocity of the fish, u₁ = 0
mass of water expelled by the fish, m₂ = 0.30 g = 0.0003 kg
time during which the water was expelled, t = 5.0 ms = 5.0 x 10⁻³ s
velocity of the water, v = 2.5 m/s
The magnitude of force of the exerted water is equal to the magnitude of force the fish exerted on the water.
The magnitude of force of the exerted water is calculated as follows;
[tex]F = ma = m\frac{v}{t} \\\\F = \frac{mv}{t} \\\\F = \frac{m_2 \ \times \ v}{t} \\\\F = \frac{0.0003 \ \times \ 2.5}{5 \times 10^{-3}} \\\\F = 0.15 \ N[/tex]
The correct option is D.
Therefore, the average force the fish exerts on the drop of water is 0.15 N.
5.
What is gravity?
a) A force
D b) Energy
c) A push
d) All of them
science
A). force
hope it helps and your day will be full of happiness
An electron with an initial speed of 700,000 m/sm/s is brought to rest by an electric field. Did the electron move into a region of higher potential or lower potential?
Answer:
lower potential
Explanation:
Given that,
An electron with an initial speed of 700,000 m/s is brought to rest by an electric field. The electric field is defined as the electric force per unit charge. The electron must go in the opposite direction to get to the rest. It would imply that the electron would move in a region of lower potential.
You desire to observe details of the Statue of Freedom, the sculpture by Thomas Crawford that is the crowning feature of the dome of the United States Capitol in Washington, D.C. For this purpose, you construct a refracting telescope, using as its objective a lens with focal length 86.3 cm. In order to acheive an angular magnification of magnitude 5.01, what focal length fe should the eyepiece have?
Answer:
the focal length of the eyepiece is 17.23 cm
Explanation:
The computation of the focal length of the eyepiece is shown below:
= Focal length of objective lens ÷ angular magnification magnitude
= 86.3 ÷ -5.01
= 17.23 cm
Hence, the focal length of the eyepiece is 17.23 cm
We simply divided the angular magnification magnitude from the focal length of objective lens so that the focal length of the eyepiece could come
'J
A student on a skateboard, with a combined mass of 78,2 kg, is moving east at
1,60 m.s 1. As he goes by, the student skilfully scoops his 6,4 kg backpack from the
bench where he had left it. What will be the velocity of the student immediately
after the pickup?
Answer:
v = 1.48 m / s
Explanation:
This is an exercise in conserving the moment. Let's define a reference system made up of the student, the scooter and the collected mass. For this system the forces during the collection are internal and element and conserves
initial interim. Before picking up the merchandise
p₀ = M v₀
final instant. After picking up the object
p_f = (M + m ') v
how the moment was created
p₀ = p_f
M v₀ = (M + m) v
let's calculate
v = [tex]\frac{M}{m+ M}[/tex] vo
v = 78.2 / (6.4 +78.2) 1.60
v = 1.48 m / s
We can see stars like the Sun because they
Answer:
are nearby and bright i hope this helps
If a gas turned into a solid without going through the liquid state and how do you reverse it?
Answer:
put it in a volcano
Explanation:
How is the L-section filter useful at both low and high frequencies?
Answer: High pass filters, and in particular LC high pass filters are used in many RF applications where they block the lower frequencies and allow through higher frequency signals. Typically LC filters are used for the higher radio frequencies where active filters are not so manageable, and inductors more appropriate.
Answer:
high pass filters and in particular LC high pass filter are used in many RF application where they block the lower frequencies and allow through higher frequency signals. Typically LC filters are used for the higher radio frequencies where active filters are not so manageable and indicators more appropriate
11.
How can we increase pressure?
Reducing surface area
Increasing surface area
Reducing force
If the surface area becomes smaller, the pressure becomes larger.
528 nm light passes through a single slit. the second (m=2) diffraction minimum occurs at an angle of 3.48 degrees. what is the width of the slit
Answer:
1.74
Explanation:
right on acellus
Answer:
1.74
Explanation:
acellus
PLEASE HELP
A problem says a plane is accelerating
3.42 m/s2 northeast. Which one of these
tables includes that information correctly?
Answer:
The answer is C, I just guessed and got it right lol
Explanation:
Can anyone help please
Answer:
Option C, the current is constant through the wire.
Explanation:
Ok, so we know that as larger cross-section we have, smaller resistance, so makes sense to think that the current will be larger in the first piece of wire.
But now let's think in a simpler case.
Suppose that in the image we see pipes, and through these pipes, there is water flowing.
You would say that the water flow in WX is larger than the current in XY?
No, it can´t be, the volume of water that leaves WX in a lapse of time Δt, must be the exact same volume of water that enters XY in that lapse of time, then the water flow is constant.
The only thing that can happen is that the velocity at which the water moves in WX is smaller than the velocity at which the water moves in the other parts.
The same thing happens here, the current will be constant, and the thing that changes is the velocity at which the electrons flow in each part of the wire.
So if you actually had a wire like this, you would see that the thinner parts heat a lot more than the others, and this happens because the electrons in those parts have a lot more kinetic energy.
The correct graph is C.
write formula of Plank's constant ,angular momentum, impulse ,stress,Young s modulus.
Answer:
E = hf. Plank's constant
L=mvr Angular momentum
F • t = m • Δ v. Implulse
: σ = F/A Stress
Explanation:
for youngs modulus its in the pictuure
According to Newton, which of these will determine if and how an object will move?
1. how much energy the object has
2. how unstable the object is
3. whether a net force acts on the object
4. he total mass of the object
Answer:
3
Explanation:
Answer:
whether a net force acts on the object
If an irregularly shaped object (such as a wrench) is dropped from rest in a classroom and feels no air resistance, it will If an irregularly shaped object (such as a wrench) is dropped from rest in a classroom and feels no air resistance, it will accelerate and turn about its center of gravity with uniform angular speed. accelerate and turn about its center of gravity with uniform angular acceleration. accelerate and turn until its center of gravity reaches its lowest point. accelerate and spin until its center of gravity reaches its highest point. accelerate but will not spin.
Answer:
It accelerate but will not spin.
Explanation:
If an irregular shaped object is dropped from rest without feeling any form of air resistance it will accelerate without spinning and this is due to the fact that there is no Torque around the center of gravity
