The population density is 87.4, under the condition that a study report shows that in 2010 the population of the United States was counted to be 308,745,538 people and the land area is approximately 3,531,905 square miles.
Now to evaluate the population density of the United States in 2010, here we have to use the principles of division
Population density = Population / Land area
Staging the values from the study
Population density = 308,745,538 / 3,531,905
The evaluated Population density = 87.4 people per square mile
Then, the United State's population density in 2010 was evaluated as 87.4 people per square mile.
To learn more about population density
https://brainly.com/question/13902749
#SPJ4
The complete question is
A study reports that in 2010 the population of the United States was 308,745,538 people and the land area was approximately 3,531,905 square miles. Based on the study, what was the population density, in people per square mile, of the United States in 2010? Round your answer to the nearest tenth.
Claire flips a coin 4 times. Using the table, what is the probability that the coin will show tails at least once?
2.
Number of Tails
Probability
0
0. 06
1
0. 25
3
0. 25
4
0. 06
?
O 0. 06
O 0. 25
0. 69
O 0. 94
Mark this and return
Save and Exit
Next
Sunmit
The probability that the coin will show tails at least once is 0.56.
To find the probability that the coin will show tails at least once, you can sum the probabilities of getting 1, 3, or 4 tails, as shown in the table:
Probability of 1 tail: 0.25
Probability of 3 tails: 0.25
Probability of 4 tails: 0.06
Now, add these probabilities together:
0.25 + 0.25 + 0.06 = 0.56
So, the probability that the coin will show tails at least once is 0.56.
Learn more about probability,
https://brainly.com/question/24756209
#SPJ11
For thousands of years, gold has been considered one of the Earth's most precious metals. One hundred percent pure gold is 24-karat gold, which is too soft to be made into jewelry. Most gold jewelry is 14-karat gold, approximately 58% gold. If 18 karat-gold is 75% gold and 12-karat gold, how much of each should be used to make a 14-karat gold bracelet weighing 500 grams
The solution is: 14 karat gold is 58.3333...% gold
We have given that;
75% gold and 50% gold and we need to make 200 grams of 58.3333...% gold.
Since, A percentage is a number or ratio that can be expressed as a fraction of 100. A percentage is a number or ratio expressed as a fraction of 100. It is often denoted using the percent sign, "%", although the abbreviations "pct.", "pct" and sometimes "pc" are also used. A percentage is a dimensionless number; it has no unit of measurement.
Here, we have,
A) x + y = 200
B) .75x + .50y = ( (14/24) * 200)
We multiply equation B) by -1.3333... and get
B) -x -.6666...y = -155.5555... then adding A)
A) x + y = 200 we get
.3333...y = 44.4444...
y = 133.3333... grams 12 karat gold
x = 66.6666... grams 18 karat gold
Double-Checking the answer
133.3333... * .5 = 66.6666...
66.6666 * .75 = 50.0000...
Hence, Concentration of final solution = (66.6666... + 50) / 200 = 58.3333...% which is 14 karat gold
To learn more on percentage click:
brainly.com/question/13450942
#SPJ1
Savas easybrigde use the gcf and the distributive property to find the sum.
22 + 33
write each number as a product using the gcf as a factor, and apply the distributive property.
22 + 33 = ?
To use the GCF and distributive property to find the sum of 22 + 33, we first need to identify the GCF of both numbers, which is 11.
We can then write each number as a product using the GCF as a factor: 22 = 11 x 2 and 33 = 11 x 3. Next, we can apply the distributive property by multiplying the GCF by the sum of the other factors in each number: 11 x (2 + 3).
Finally, we can simplify the expression by adding the sum of the other factors, which is 5: 11 x 5 = 55. Therefore, the sum of 22 + 33 using the GCF and distributive property is 55.
In summary, to find the sum of 22 + 33 using the GCF and distributive property, we first identify the GCF as 11 and write each number as a product using the GCF as a factor.
We then apply the distributive property by multiplying the GCF by the sum of the other factors in each number. Finally, we simplify the expression by adding the sum of the other factors and arrive at the answer of 55. This method can be helpful when working with larger numbers or more complex expressions.
To know more about distributive property click on below link:
https://brainly.com/question/6276874#
#SPJ11
Quadrilateral ABCD is a square with diagonals AC and BD. If A(4, 9) and C(3, 2), find the slope of BD.
7 is the slope of BD in Quadrilateral.
What in arithmetic is a quadrilateral?
Four sides, four vertices, and four angles make up a quadrilateral, which is a two-dimensional form. Concave and convex are the two most common forms. Additionally, there are several subgroups of convex quadrilaterals, including trapezoids, parallelograms, rectangles, rhombus, and squares.
There are four closed sides to a quadrilateral. Quadrilaterals are the following figures: produced by Raphael. a quadrilateral form. The form features a single pair of parallel sides and no right angles.
points A(4, 9) and C(3, 2)
slope = y₂ - y₁/x₂ - x₁
= 2 - 9/3 - 4
= - 7/-1
= 7
Learn more about Quadrilateral
brainly.com/question/29934440
#SPJ1
The quantity of a product manufactured by a company is given by Q = aK^{0.6}L^{0.4}
where a is a positive constant, Kis the quantity of capital and Listhe quantity of labor used. Capital costs are $44 per unit, labor costs are $11 per unit, and the company wants costs for capital and labor combined to be no higher than $330. Suppose you are asked to consult for the company, and learn that 6 units each of capital and labor are being used, (a) What do you advise? Should the company use more or less labor? More or less capital? If so, by how much?
The company should increase the quantity of capital used from 6 units to 3 units, an increase of 3 units.
The cost of capital and labor can be expressed as:
C = 44K + 11L
The company wants to limit the cost of capital and labor to $330:
44K + 11L ≤ 330
Substituting Q = aK^{0.6}L^{0.4} into the inequality, we get:
44K + 11L ≤ 330
44K + 11(Q/aK^{0.6})^{0.4} ≤ 330
44K^{1.6} + 11(Q/a)^{0.4}K ≤ 330
Solving for K, we get:
K ≤ (330 - 11(Q/a)^{0.4}) / 44K^{1.6}
Substituting K = 6, Q = aK^{0.6}L^{0.4}, and solving for L, we get:
Q = aK^{0.6}L^{0.4}
Q/K^{0.6} = aL^{0.4}
L = (Q/K^{0.6})^{2.5}/a
Substituting Q = a(6)^{0.6}(6)^{0.4} = 6a into the equation, we get:
L = (6/a)^{0.4}(6)^{2.5} = 9.585a^{0.6}
Therefore, the company is currently using 6 units each of capital and labor, and the total cost of capital and labor is:
C = 44(6) + 11(6) = 330
This means that the company is already using the maximum allowable cost. To reduce the cost, the company should use less labor or less capital.
To determine whether to use more or less labor, we can take the derivative of Q with respect to L:
∂Q/∂L = 0.4aK^{0.6}L^{-0.6}
This is a decreasing function of L, so as L increases, the quantity of product Q produced will decrease. Therefore, the company should use less labor.
To determine how much less labor to use, we can find the value of L that would reduce the cost to the maximum allowable level of $330:
44K + 11L = 330
44(6) + 11L = 330
L = 18
Therefore, the company should reduce the quantity of labor used from 6 units to 18 units, a decrease of 12 units.
To determine whether to use more or less capital, we can take the derivative of Q with respect to K:
∂Q/∂K = 0.6aK^{-0.4}L^{0.4}
This is an increasing function of K, so as K increases, the quantity of product Q produced will increase. Therefore, the company should use more capital.
To determine how much more capital to use, we can find the value of K that would reduce the cost to the maximum allowable level of $330:
44K + 11L = 330
44K + 11(18) = 330
K = 3
Therefore, the company should increase the quantity of capital used from 6 units to 3 units, an increase of 3 units.
To learn more about quantity of capital visit: https://brainly.com/question/24183446
#SPJ11
Step 2: Construct regular polygons inscribed in a circle.
B) The completed construction of a regular hexagon is shown below. Explain why △ACF is 30°-60°-90° triangle. (10 points)
The explanation on why △ACF is 30°-60°-90° triangle is given below.
How to explain the informationWith a regular hexagon, each of its sides and angles are equal in measure. Consider the centre of the encompassing circle, connected to two neighbouring vertices - labeled A and B here. This then creates a radius wherein the length of AB is basically equal to any other side, denoted as 's'. Furthermore, △ABF will be an isosceles triangle (with AB = BF).
From these facts, we can produce △ACF which is a right angled triangle – with AC being its hypotenuse, A F and FB both equating to s/2, finally concluding that ∠AFB is equivalent to 120°/2 = 60° while establishing that ∠ACF is also a right angle constituent making △ACF essentially a 30°-60°-90° triangle.
Learn more about hexagon on
https://brainly.com/question/15424654
#SPJ1
I need help with this problem just to write down a sentence on what it means
Point B is not the midpoint of line AC, because angle AOB is not half of angle AOC.
What is the value of angle AOB and angle BOC?If point B is the midpoint of line AC, then angle AOB must be equal to angle BOC.
The value of angle AOC is calculated as follows;
let angle AOC = θ
cos θ = 100 yds / 500 yds
cos θ = 0.2
θ = cos⁻¹ (0.2)
θ = 78.5⁰
The value of length AC is calculated as follows;
AC = √ (500² - 100²)
AC = 489.9
If point B is the midpoint, then AB = BC = 489.9/2 = 244.95
The value of angle AOB is calculated as follows;
tan β = AB/AO
tan β = 244.95/100
tan β = 2.4495
β = arc tan (2.4495)
β = 67.8⁰
Half of angle AOC = 78.5⁰/2 = 39.25⁰
β ≠ 39.25⁰
So point B is not midpoint of line AC, since angle AOB is not half of angle AOC.
Learn more about angles of triangles here: https://brainly.com/question/25215131
#SPJ1
Use the Generalized Power Rule to find the derivative of the function.
f(x) = (3x + 1)^5(3x - 1)^6
This is the derivative of the given function f(x) = (3x + 1)^5(3x - 1)^6 using the Generalized Power Rule.
To find the derivative of the function f(x) = (3x + 1)^5(3x - 1)^6 using the Generalized Power Rule, we will need to apply both the Product Rule and the Chain Rule.
The Product Rule states that if you have a function f(x) = g(x)h(x), then f'(x) = g'(x)h(x) + g(x)h'(x).
First, let's identify g(x) and h(x) in your function:
g(x) = (3x + 1)^5
h(x) = (3x - 1)^6
Next, we'll find the derivatives g'(x) and h'(x) using the Chain Rule, which states that if you have a function y = [u(x)]^n, then y' = n[u(x)]^(n-1) * u'(x).
For g'(x):
u(x) = 3x + 1
n = 5
u'(x) = 3
g'(x) = 5(3x + 1)^(5-1) * 3 = 15(3x + 1)^4
For h'(x):
u(x) = 3x - 1
n = 6
u'(x) = 3
h'(x) = 6(3x - 1)^(6-1) * 3 = 18(3x - 1)^5
Now, we apply the Product Rule:
f'(x) = g'(x)h(x) + g(x)h'(x) = 15(3x + 1)^4(3x - 1)^6 + (3x + 1)^5 * 18(3x - 1)^5
To learn more about derivative click here
brainly.com/question/25324584
#SPJ11
The iterative function that describes how your new car loses value over time is f(t)=0. 75t, where t is the number of years since you purchased the car. If you paid $25,000 for your car and you sell it after owning the car for 3 years, how much is the car worth?
t_3=$14,062. 50
t_3=$10,546. 88
t_3=$7,910. 15
t_3=$18,750
If you paid $25,000 for your car and you sell it after owning the car for 3 years, then the worth of the car is t₃=$7,910. 15 (option c).
To find the value of your car after owning it for 3 years, we need to evaluate the function at t=3. This means we need to substitute t=3 into the function and simplify the expression.
f(3) = 0.75(3) = 2.25
The output of the function when t=3 is 2.25. But what does this number mean? It represents the fraction of the original value of the car that remains after owning it for 3 years.
To find the actual value of the car, we need to multiply this fraction by the original value of the car, which is given as $25,000.
Value of car after 3 years = 2.25 x $25,000 = $56,250
Therefore, the value of the car after owning it for 3 years is $7,910.15. This is the option (C) in the given choices.
To know more about function here
https://brainly.com/question/28193995
#SPJ4
You are going to make a password that starts with two letters from the alphabet, followed by three digits (for example, AB-123). Digits may be numbers 0
through 9
If you are allowed to repeat letters or numbers, you can make
passwords.
If you don't repeat any letters or numbers, you can make
passwords
When allowing repetition, you can make 676,000 passwords, and without repetition, you can make 468,000 passwords.
To create a password that starts with two letters from the alphabet, followed by three digits (for example, AB-123), you can make a different number of passwords depending on whether you are allowed to repeat letters or numbers.
1. If you are allowed to repeat letters or numbers, you can make:
- 26 (alphabet letters) x 26 (alphabet letters) x 10 (digits 0-9) x 10 (digits 0-9) x 10 (digits 0-9) = 676,000 passwords.
2. If you don't repeat any letters or numbers, you can make:
- 26 (alphabet letters) x 25 (remaining alphabet letters) x 10 (digits 0-9) x 9 (remaining digits 0-9) x 8 (remaining digits 0-9) = 468,000 passwords.
Your answer: When allowing repetition, you can make 676,000 passwords, and without repetition, you can make 468,000 passwords.
Learn more about Permutations: https://brainly.com/question/30649574
#SPJ11
What is the volume of a right rectangular prism with a length of 4. 8 meters, a width of 2. 3 meters, and a height
of 0. 9 meters?
O4. 968 m3
O9. 936 m3
O 11. 94 m3
O 34. 86 m3
PLS ANSWER FAST I WILL GIVE BRAINIEST!!!!!
Answer:
Step-by-step explanation:
The volume of the given prism is 9.936 cubic meters, To calculate the volume of a right rectangular prism, we need to multiply its length, width, and height together.
Given that the length of the prism is 4.8 meters, the width is 2.3 meters, and the height is 0.9 meters, we can calculate the volume using the formula:
Volume = length x width x height
Volume = 4.8 m x 2.3 m x 0.9 m
Volume = 9.936 m^3
Therefore, the volume of the right rectangular prism is 9.936 cubic meters.
It is important to note that when we calculate volume, we are dealing with a three-dimensional space, and the units we use must be cubed (m^3 in this case). This is because we are measuring the amount of space occupied by the object in all three dimensions.
In summary, to find the volume of a right rectangular prism, we simply multiply its length, width, and height together. In this case, the volume of the given prism is 9.936 cubic meters.
To know more about volume of a right rectangular prism refer here:
https://brainly.com/question/3248292#
#SPJ11
Each side y of a square is increased by 5 units. Which expression represents the number of square units in the area of the new square?
O 2y + 10
O y^2 + 10y + 25
O y^2 + 25
O y^2 + 10y + 10
The expression for the area of the new square is y² + 10y + 25.
How to find area?To find the expression that represents the area of the new square, we need to consider that when each side of a square is increased by 5 units, the new side length becomes y + 5. The area of the new square is then given by:
(New side length)² = (y + 5)²
Expanding the square, we get:
(y + 5)² = y² + 10y + 25
Therefore, the expression that represents the area of the new square is y² + 10y + 25.
So, the correct option is:
O y² + 10y + 25
Learn more about area
brainly.com/question/27683633
#SPJ11
PLEASE HELP!!!!!!! Line M is represented by the following equation: x + y = −1 What is most likely the equation for line P so the set of equations has infinitely many solutions? (4 points) Question 5 options: 1) 2x + 2y = 2 2) 2x + 2y = 4 3) 2x + 2y = −2 4) x − y = 1
The equation for line P such that the system has an infinite number of solutions is given as follows:
3) 2x + 2y = -2.
How to obtain the equation?The first equation for the system of equations is given as follows:
x + y = -1.
A system of equations has an infinite number of solutions when the two equations are multiples.
Multiplying the equation by 2, we have that:
2x + 2y = -2.
Meaning that equation 3 is correct.
More can be learned about a system of equations at https://brainly.com/question/13729904
#SPJ1
suppose you are playing poker with a non-standard deck of cards. the deck has 5 suits, each of which contains 12 values (so the deck has 60 cards total). how many 6-card hands are there, where you have at least one card from each suit?
The number of 6-card hands in which at least one card from each suit is equal to 8,184,220.
Total number of 6-card hands that can be formed from a deck of 60 cards is,
Using combination formula,
C(60, 6) = 50,063,860
Now, subtract the number of 6-card hands that do not contain at least one card from each suit.
There are 5 ways to choose the suit that will be missing from the hand.
Once this suit is chosen, there are 48 cards remaining in the other suits.
Choose 6 cards from this set, so the number of 6-card hands that do not contain any cards from the chosen suit is,
C(48, 6) = 12,271,512
Overcounted the number of hands that are missing more than one suit.
There are C(5, 2) ways to choose 2 suits that will be missing from the hand.
Once these suits are chosen, there are 36 cards remaining in the other 3 suits.
Choose 6 cards from this set, so the number of 6-card hands that do not contain any cards from the chosen suits is,
C(36, 6) = 1,947,792
We cannot have a 6-card hand that is missing more than 2 suits.
3 suits with no cards in the hand, which is not allowed.
Number of 6-card hands that have at least one card from each suit is,
C(60, 6) - 5×C(48, 6) + C(5, 2)×C(36, 6)
=50,063,860 - 5× 12,271,512 + 10 × 1,947,792
= 50,063,860 -61,357,560 + 19,477,920
= 8,184,220
Therefore, there are 8,184,220 of 6-card hands that have at least one card from each suit.
Learn more about cards here
brainly.com/question/15699808
#SPJ4
Given that abcd is a rhombus, determine the length of each diagonal, ac, and bd if m∠ade=20° and ad = 8cm. please help and show me how you did it
The length of diagonal ac is approximately 15.58 cm, and the length of diagonal bd is approximately 12.22 cm
Rhombus is a special type of parallelogram in which all four sides are congruent. The opposite angles of a rhombus are also congruent, and the diagonals bisect each other at right angles.
Now, let's consider the given rhombus abcd, where ad = 8cm and m∠ade=20°. We need to determine the length of diagonals ac and bd.
First, let's use the law of cosines to find the length of side ae. We know that ad = 8cm, and m∠ade=20°, so we can use the formula:
ae² = ad² + de² - 2ad(de)cos(m∠ade)
Substituting the values, we get:
ae² = 8² + de² - 2(8)(de)cos(20°)
Next, we can use the fact that a rhombus has all sides congruent to find the length of side de. Since abcd is a rhombus, we know that ac and bd are also congruent diagonals that bisect each other at right angles. Therefore, we can draw diagonal ac and use the Pythagorean theorem to find the length of ac:
ac² = (ae/2)² + (de/2)²
Substituting ae² from the previous equation, we get:
ac² = ((8² + de² - 2(8)(de)cos(20°))/4) + (de/2)²
Simplifying the equation and using the fact that ac and bd are congruent, we get:
bd² = ac² = (8² + de² - 2(8)(de)cos(20°))/2
Finally, we can use the Pythagorean theorem to find the length of diagonal bd:
bd² = ab² + ad²
Substituting ab = ac/2 and ad = 8cm, we get:
bd² = (ac/2)² + 8²
Substituting ac² from the previous equation, we get:
bd² = ((8² + de² - 2(8)(de)cos(20°))/8)² + 8²
Simplifying the equation, we get:
bd ≈ 12.22 cm
Similarly, we can solve for ac using the equation we derived earlier:
ac² = ((8² + de² - 2(8)(de)cos(20°))/4) + (de/2)²
Substituting de ≈ 9.84cm (which we can solve for from the equation ae² = 8² + de² - 2ad(de)cos(m∠ade)), we get:
ac ≈ 15.58 cm
Therefore, the length of diagonal ac is approximately 15.58 cm, and the length of diagonal bd is approximately 12.22 cm
To know more about Diagonals here
https://brainly.com/question/22388713
#SPJ4
What is the exact solution to the system of equations?
Answer:
Step-by-step explanation:
the point at which the lines representing the linear equations intersect
I need help what is the approximate area, in square feet, of the shaded region in this figure use 3. 14
To find the approximate area of the shaded region in this figure, we need to subtract the area of the smaller circle from the area of the larger circle. The radius of the larger circle is 6 feet and the radius of the smaller circle is 3 feet.
The formula for the area of a circle is A = πr^2, where π is approximately 3.14 and r is the radius.
So, the area of the larger circle is A = 3.14 x 6^2 = 113.04 square feet.
The area of the smaller circle is A = 3.14 x 3^2 = 28.26 square feet.
To find the area of the shaded region, we subtract the area of the smaller circle from the area of the larger circle:
Area of shaded region = 113.04 - 28.26 = 84.78 square feet (rounded to two decimal places).
Therefore, the approximate area of the shaded region in this figure is 84.78 square feet.
Learn more about area of the shaded region: https://brainly.com/question/1297097
#SPJ11
find the line parallel to y=4x+1 that includes the point (-2, -5)
y=4x+3
Parallel lines have the same gradient - 4x
substitute the x and y values from the coordinates into y=mx+c
so
-5=(4×-2)+c
-5=-8+c
c=3
therefore, the answer is y=4x+3
y’all please answer quick!!! :)
The mountain man ascends to the summit and then descends on the opposite side in a curved path, considering the route as a curve of a quadratic function Complete the following :
The man's path in pieces:
• Track direction "cutting hole":
•Route starting point: x=
• Path end point: x=
• The highest point reached by the man is the "head": (,)
• Maximum value:
• Y section:
•Axis of Symmetry Equation: x=
• the field:
• term:
Considering the route as a curve of a quadratic function, the information should be completed as follows;
Track direction "cutting hole": negative.Route starting point: x = -5.Path end point: x = 2.The highest point reached by the man is the "head": (-1, 4)Maximum value: 4Y section: distance or height.Axis of Symmetry Equation: x = -1The field: Area covered by the man's path.Term: x, y, a, h, and k.What is the vertex form of a quadratic equation?In Mathematics and Geometry, the vertex form of a quadratic function is represented by the following mathematical equation (formula):
y = a(x - h)² + k
Where:
h and k represents the vertex of the graph.a represents the leading coefficient.Based on the information provided about this quadratic function, we can logically deduce that a mathematical equation which quickly reveals the vertex of the quadratic function is given by:
y = a(x - h)² + k
0 = a(2.9 - (-1))² + 4
3.9a = -4
a = -4/3.9
a = -1.03
Therefore, the required quadratic function is given by:
y = a(x - h)² + k
y = -1.03(x - (-1))² + 4
y = -1.03(x + 1)² + 4
Read more on vertex here: brainly.com/question/14946018
#SPJ1
Missing information:
The question is incomplete and the complete question is shown in the attached picture.
which graph represents the linear equation y= 1/2 x + 2
Answer:
The graph on the top right
Step-by-step explanation:
The slope-intercept form is y = mx + b
m = the slope
b = y-intercept
The equation is y = 1/2x + 2
The y-intercept in this equation is 2, meaning the graph has a point (0,2) on it. Looking at the options, the only graph that has a point (0,2) is the map on the top right, and that is the answer.
3) Graph polygon G(-3,-2) R(-4,4) E(0,1) A(1, -2) T(-1, -3) and it’s image G’R’E’A’T’=R (GREAT)
A graph of polygon GREAT and its image after a counterclockwise rotation of 90° around the origin is shown in the image attached below.
What is a rotation?In Mathematics and Geometry, the rotation of a point 90° about the center (origin) in a counterclockwise (anticlockwise) direction would produce a point that has these coordinates (-y, x).
By applying a rotation of 90° counterclockwise around the origin to vertices W, the coordinates of the vertices of the image ΔA'B'C' are as follows:
(x, y) → (-y, x)
Ordered pair G = (-3, -2) → Ordered pair G' = (2, -3)
Ordered pair R = (-4, 4) → Ordered pair R' = (-4, -4)
Ordered pair E = (0, 1) → Ordered pair E' = (-1, 0)
Ordered pair A = (1, -2) → Ordered pair A' = (2, 1)
Ordered pair T = (-1, -3) → Ordered pair T' = (3, -1)
Read more on rotation here: brainly.com/question/28854313
#SPJ1
You decide to work fewer hours per week, which results in an 8% decrease in your pay. what percentage increase in pay would you have to receive in order to gain your original salary again?
You would have to receive an approximately 8.696% increase in pay to regain your original salary after an 8% decrease.
To find the percentage increase in pay needed to regain your original salary after an 8% decrease, follow these steps:
1. Assume your original salary is 100%. After an 8% decrease, your salary becomes 100% - 8% = 92%.
2. Calculate the difference between your original salary (100%) and your current salary (92%). The difference is 100% - 92% = 8%.
3. To find the percentage increase needed to regain your original salary, divide the difference (8%) by your current salary (92%): 8% / 92% = 0.08696.
4. Multiply the result by 100 to convert it to a percentage: 0.08696 (100) = 8.696%.
So, you would have to receive an approximately 8.696% increase in pay to regain your original salary after an 8% decrease.
To know more about "Percentage" refer here:
https://brainly.com/question/10893287#
#SPJ11
A speaker is in the shape of a cube with an edge length of 3. 5 inches. The speaker is sold in a package in the shape of a square prism with a base area of 16 square inches and a height of 4. 25 inches. How much empty space, in cubic inches, remains in the package after the speaker is placed in the package?
The volume of the cube-shaped speaker is 42.875 cubic inches. The volume of the package is 68 cubic inches. Subtracting the volume of the speaker from the volume of the package gives the empty space remaining, which is 25.125 cubic inches.
The volume of the cube-shaped speaker is given by V₁ = (edge length)³ = 3.5³ = 42.875 cubic inches.
The volume of the square prism-shaped package is given by V₂ = (base area) x (height) = 16 x 4.25 = 68 cubic inches.
Therefore, the empty space remaining in the package after the speaker is placed in it is V₂ - V₁ = 68 - 42.875 = 25.125 cubic inches.
So, the empty space remaining in the package is 25.125 cubic inches.
To know more about volume:
https://brainly.com/question/11168779
#SPJ4
purab bought twice the number of rose plants that he had in his lawn. however, he threw 3 plants as they turned bad. after he planted new plants, there were total 48 plants in the garden. how many plants he had in his lawn earlier?
Purab initially had 17 rose plants in his lawn before buying the new ones.
Purab initially had a certain number of rose plants in his lawn. He bought twice that number, but had to discard 3 plants as they turned bad
After planting the new ones, there were a total of 48 plants in the garden.
To determine how many plants he had earlier, let's use a variable x to represent the initial number of plants.
Purab bought 2x plants, and after removing the 3 bad plants, he had (2x - 3) good plants.
Adding these to the initial number of plants, the equation becomes:
x + (2x - 3) = 48
Combining like terms, we get:
3x - 3 = 48
Next, we add 3 to both sides:
3x = 51
Finally, we divide by 3: x = 17
Learn more about equation at
https://brainly.com/question/2081704
#SPJ11
A leaf blower was marked up 150% from an original cost of $80. Last Friday, Lee bought the leaf blower and paid an additional 7. 75% in sales tax. What was his total cost?
$
Lee's total cost for the leaf blower was $215.50.
First, let's find the selling price of the leaf blower before sales tax was added:
The leaf blower was marked up by 150%, so the selling price is:
= [tex]80 + (\frac{150}{100}) 80[/tex]
= 80 + 120
= 200
So the selling price of the leaf blower before sales tax was $200.
Next, we need to find the amount of sales tax that Lee paid. To do this, we need to multiply the selling price by the sales tax rate:
Sales tax = 7.75% ($200)
= 0.0775 ($200)
= $15.50
Finally, we can find Lee's total cost by adding the selling price and the sales tax:
Total cost = Selling price + Sales tax
= $200 + $15.50
= $215.50
Therefore, Lee's total cost for the leaf blower was $215.50.
To know more about "Selling price" refer here:
https://brainly.com/question/3798799#
#SPJ11
Evaluate. (3/5)3 enter your answer by filling in the boxes.
the final answer is 27/125.
To evaluate [tex](3/5)^3[/tex], we simply need to multiply (3/5) by itself three times:
[tex](3/5)^3 = (3/5) * (3/5) * (3/5)[/tex]
To simplify, we can first multiply the numerators together and the denominators together:
[tex](3/5)^3 = 27/125[/tex]
To know more about multiply refer here
https://brainly.com/question/10883691#
#SPJ11
1. Does the graph below represent a function? Explain how you know.
Q1
A. Yes; the graph is linear.
B. No; the graph does not pass the vertical line test.
C. Yes; the graph passes the vertical line test.
D. No; the graph intersects the x and y axis.
p.s i might fail and retake 7th grade
C. Yes; the graph passes the vertical line test.
How does the graph below represent a function?The correct answer is C. Yes; the graph passes the vertical line test.
To determine whether a graph represents a function, we apply the vertical line test. The vertical line test states that for a graph to represent a function, no vertical line should intersect the graph in more than one point.
In this case, the graph passes the vertical line test if each vertical line crosses the graph at most once. If this condition is satisfied, then each x-value corresponds to a unique y-value, indicating that the graph represents a function.
Since the question states that the graph passes the vertical line test, we can conclude that it represents a function.
Learn more about function
brainly.com/question/28925980
#SPJ11
What is the value of the expression below? (3 1/2 - 9 3/4) entre (-2.5)
PLEASE HELP
Answer:
Let's solve this in steps:
1. Convert mixed numbers to fractions:
```
3 1/2 = 7/2
9 3/4 = 39/4
```
2. Perform the subtraction:
```
7/2 - 39/4 = -11/4
```
3. Divide by -2.5:
```
-11/4 / -2.5 = 4.4
```
Therefore, the value of the expression is **4.4**.
A searchlight is shaped like a paraboloid of revolution. if the light source is located 1 feet from the base along the axis of symmetry and the opening is 6 feet across, how deep should the searchlight be?
The searchlight should be 1/3 feet deep at the edge of the opening. Since the paraboloid is a continuous surface, the depth will increase gradually from the edge of the opening to the vertex at (0,0,1).
Determine the depth of the searchlight shaped like a paraboloid of revolution, we need to use the equation for the standard form of a paraboloid of revolution:
z = (x^2 + y^2) / (4f)
where z is the depth, x and y are the horizontal and vertical coordinates, and f is the focal length of the paraboloid.
We know that the light source is located 1 feet from the base along the axis of symmetry, which means that the vertex of the paraboloid is at (0,0,1).
We also know that the opening is 6 feet across, which means that the horizontal distance from one side of the opening to the other is 3 feet.
Using this information, we can find the value of f:
f = (d/2)^2 / 2r
where d is the diameter of the opening (6 feet), and r is the radius of curvature at the vertex (1 foot).
f = (6/2)^2 / 2(1) = 4.5 feet
Now we can plug in the values for x, y, and f to solve for z:
z = (x^2 + y^2) / (4f)
z = (x^2 + y^2) / (4(4.5))
z = (x^2 + y^2) / 18
Since the opening is 6 feet across, we know that the maximum value of x is 3 feet. Therefore, we can use the maximum value of y (also 3 feet) to find the depth at the edge of the opening:
z = (3^2 + 3^2) / 18
z = 6/18
z = 1/3 feet
So the searchlight should be 1/3 feet deep at the edge of the opening. However, since the paraboloid is a continuous surface, the depth will increase gradually from the edge of ×the opening to the vertex at (0,0,1).
Read more about paraboloid.
https://brainly.com/question/18850313
#SPJ11
Are △abc and △def similar triangles? choose all that apply.
no, the corresponding sides are not proportional.
yes, the corresponding sides are proportional.
yes, the corresponding angles are all congruent.
no, the corresponding angles are not congruent.
assessment navigation
△ABC and △DEF are similar triangles if they have corresponding sides that are proportional and the corresponding angles are all congruent. Thus, the options that are applied are B and C.
Similar shapes are enlargements or shortening of other shapes using a scale factor.
Two triangles are said to be similar if the corresponding sides are proportional and the corresponding angles are the same. There are the following similarity criteria:
1. AA or AAA where all the angles are equal
2. SSS where all the sides are proportional to the corresponding sides
3. SAS where the corresponding sides and the angle between are proportional and congruent.
Learn more about Similar Triangle:
https://brainly.com/question/29782809
#SPJ4
