A gas at 850. mmhg occupies 1.5 l. the temperature is raised from 15 °c to 35 °c causing the volume to change to 2.5 l. what is the final pressure of the gas?

One formula unit of ammonium dichromate, three ions would form upon dissociation in water.

When ammonium dichromate (NH₄)₂Cr₂O₇ dissociates in water, it breaks down into two ammonium ions (NH₄⁺) and one dichromate ion (Cr₂O₇²⁻). The dissociation is represented by the following chemical equation:

(NH₄)2Cr₂O₇ → 2NH₄⁺ + Cr₂O₇²⁻

Therefore, a total of three ions would be formed from the dissociation of ammonium dichromate in water. The two ammonium ions would have a positive charge, while the dichromate ion would have a negative charge.

These ions can interact with other ions in the solution and participate in various chemical reactions. The dissociation of ammonium dichromate is important in various industrial processes, as well as in chemical education for demonstrating chemical reactions and properties of ions.

To know more about the ammonium dichromate refer here :

https://brainly.com/question/15968213#

#SPJ11

When the average is 39.1, naturally occurring potassium consists of 50% potassium-39 and 50% potassium-41.

An isotope is a variant of an element that has the same number of protons but a different number of neutrons in its nucleus. Potassium has two naturally occurring isotopes: potassium-39 and potassium-41. To calculate the percentage of each isotope present when the average is 39.1, we can use the following formula:

% of potassium-39 = (39.1 - 41) / (39 - 41) x 100%
% of potassium-41 = 100% - % of potassium-39

Using this formula, we can first calculate the percentage of potassium-39:

% of potassium-39 = (39.1 - 41) / (39 - 41) x 100%
% of potassium-39 = -1 / (-2) x 100%
% of potassium-39 = 50%

This means that potassium-39 makes up 50% of the naturally occurring potassium. To calculate the percentage of potassium-41, we simply subtract the percentage of potassium-39 from 100%:

% of potassium-41 = 100% - 50%
% of potassium-41 = 50%

Therefore, potassium-41 also makes up 50% of the naturally occurring potassium. In summary, when the average is 39.1, naturally occurring potassium consists of 50% potassium-39 and 50% potassium-41.

To know more about potassium, visit:

https://brainly.com/question/13321031#

#SPJ11

The boiling points of the hydrocarbons can be ranked as follows;

1. 4

2. 2

3. 3

4. 1

The size of the molecules and the nature of the intermolecular interactions between the molecules essentially determine the boiling points of hydrocarbons.

Because they have more electrons and a larger surface area available for intermolecular interactions like Van der Waals forces, larger hydrocarbon molecules typically have higher boiling points.

Additionally, polar hydrocarbons and those that can form hydrogen bonds have higher boiling points than non-polar hydrocarbons because of stronger intermolecular forces.

Learn more about hydrocarbons:https://brainly.com/question/31643106

#SPJ1

Change in temperature of the Magnesium sample is calculated as 23.7°C.

Heat energy is a form of energy that is transferred between objects or systems due to temperature difference. It flows from hotter to cooler objects, and its amount is measured in joules.

As we know; Q = m c ΔT

Q is the amount of heat absorbed, m is mass of the object, c is specific heat, and ΔT is change in temperature.

ΔT = Q / (m * c)

ΔT = 1300 J / (54.2 * 1.023 )

ΔT = 23.7°C

Therefore, the change in temperature of the Magnesium sample is 23.7°C.

To know more about heat energy, refer

https://brainly.com/question/934320

#SPJ1

There is a 0.37 M molarity.

1.71 m molality is present.

The quantity of a solute in a solution is measured in terms of molarity, a unit of concentration. It is described as the quantity of solutes that dissolve in one liter of solution, or mol/L. Molarity, in other words, reveals how many moles of solute there are in a liter of solution.

To determine molarity, use the following formula:

Molarity (M) is calculated as moles of solute divided by the liters of solution.

100g/180 g/mol * 1/1.5 L is the molarity.

= 0.37 M,

Molality = 200g/58.5g/mol * 1/2 Kg

Learn more about molarity:brainly.com/question/8732513

#SPJ1

Answer:

12. Balanced chemical equation: Cu + Cl2 → CuCl2

Type of reaction: Combination or synthesis reaction

13. Balanced chemical equation: 2Ca(ClO3)2 → 2CaCl2 + 3O2

Type of reaction: Decomposition reaction

14. Balanced chemical equation: 2Li + 2H2O → 2LiOH + H2

Type of reaction: Single displacement or substitution reaction

Explanation:

Hope it helps^^

2NaOH + H₃PO₄ → Na₂HPO₄ + 2H2O is the balanced chemical equation for the reaction between 2 moles of NaOH and 1 mole of H3PO4.

It is clear from the balanced chemical equation that the reaction between 2 moles of NaOH and 1 mole of H₃PO₄ is an acid-base reaction, commonly referred to as a neutralization reaction.

In this reaction, phosphoric acid (H₃PO₄) acts as the acid and sodium hydroxide (NaOH) as the base. Na₂HPO₄ and H2O are created when the base (NaOH) and acid (H₃PO₄) react. Since all the reactants are completely consumed in the reaction and no excess of either reactant is left over, the stoichiometric balance of the number of moles of the acid and base is demonstrated by the balanced chemical equation.

To know more about neutralization reaction, visit,

https://brainly.com/question/23008798

#SPJ4

The equilibrium constant, K, for the reaction H2(g) + I2(g) ⇄ 2HI(g) can be calculated using the expression K= [HI]2/([H2][I2]). Since the concentrations of H2, I2, and HI are given in the question, we can calculate the equilibrium constant, K, for the reaction.

K = [HI]2/([H2][I2]) = (1.77 × 10-2)2/((1.83 × 10-3)(3.13 × 10-3)) = 4.43 × 104. Therefore, the equilibrium constant, K, for the reaction H2(g) + I2(g) ⇄ 2HI(g) at 425°C is 4.43 × 104.

Using the specified concentrations of H2, I2, and HI, it appears that you have correctly calculated the equilibrium constant, K, for the reaction H2(g) + I2(g) 2HI(g) at 425°C. The ratio of the concentrations of the reactants and products at equilibrium, K, is represented by each concentration being raised to the power of its stoichiometric coefficient.

The concentration of the product, HI, is preferred above the concentrations of the reactants, H2 and I2, at equilibrium, as shown by the value of K = 4.43 104 in this instance. This suggests that at equilibrium, the forward reaction—the creation of HI—is preferred.

It is significant to remember that the equilibrium constant, K, is temperature-dependent, and that temperature changes affect K's value.

Learn more about  equilibrium  at:

https://brainly.com/question/30694482

#SPJ1

The structure of product is shown.

When pentanedioic (glutaric) anhydride reacts with ammonia at high temperature, it undergoes an amide formation reaction to produce a compound with the molecular formula C₅H₇NO₂. The amide formation reaction involves the nucleophilic attack of the ammonia molecule on one of the carbonyl carbon atoms of the anhydride, leading to the formation of an intermediate product called an amide.

This amide then undergoes further reactions to form the final product with the given molecular formula. The presence of both carboxylic acid and amide functional groups in the molecule indicates that it contains both the original anhydride and the product of its reaction with ammonia.

To know more about ammonia, here

brainly.com/question/15719562
#SPJ4

Answer:

C. Nitrogen and Phosphorous.

Explanation:

The pulse rate of blackworms collected from an environment with an acidic pH would be increased to minimize the effects of acidosis.

Acidosis occurs when there is an excess of acid in the body, which can lead to a decrease in blood pH. To compensate for this, the body increases pulse rate to improve blood circulation and oxygen delivery.

Blackworms are no exception to this mechanism and would experience an increase in pulse rate to counteract the acidic environment. It is important to note that the increase in pulse rate would not be enough to completely eliminate the effects of acidosis, but rather to minimize them.

To know more about pulse rate click on below link:

https://brainly.com/question/17744527#

#SPJ11

In this scenario, the limiting reactant is the ingredient that will run out first and limit the number of sandwiches that can be made.

Assuming that each sandwich requires two slices of bread, one serving of peanut butter, and one serving of jelly, we can see that we have enough bread and jelly to make a maximum of 1.5 sandwiches. However, since we only have one serving of peanut butter, we can only make one sandwich.

Therefore, the peanut butter is the limiting reactant. It is important to identify the limiting reactant in chemical reactions to determine the maximum amount of product that can be formed and to avoid wasting resources.

To know more about the limiting reactant refer here :

https://brainly.com/question/14225536#

#SPJ11

Answer:

1.503 x 10^23

Explanation:

your question was how many atoms, so you have to multiply that number which is how many molecules by 8 atoms per molecule of sulphur. So you get 1.503 x 10^23 atoms in 8 grams of sulfur.

hope this helps. please mark me brainliest

Answer:

Temperature

Agitation

Particle size

Explanation:

The molarity of the potassium hydroxide solution is 2.0 M.

We know that, Molarity (M) = moles of solute (mol) / volume of solution (L)

We have 0.0400 mol of KOH dissolved in 20.0 mL of water.

Volume of the solution= 20.0 mL = 20.0 / 1000 = 0.0200 L

Therefore, molarity = (0.0400 mol) / (0.0200 L) = 2.0 M

So, the molarity of the potassium hydroxide solution is 2.0 M.

Thus, option 3 is the correct answer.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

Answer: I believe it's A

Source: Trust me bro

The pressure of the gas is 76.8 atm.

The pressure of the gas can be calculated using the ideal gas law formula:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to calculate the number of moles of sulfur:

molar mass of sulfur = 32 g/mol

number of moles = mass/molar mass

= 640 g/32 g/mol

= 20 mol

Next, we need to convert the volume from milliliters to liters and the temperature from Celsius to Kelvin:

V = 540 ml = 0.54 L

T = 47°C + 273.15 = 320.15 K

Finally, we can plug in the values and solve for pressure

P = nRT/V

= 20 mol x 0.08206 L atm mol⁻¹ K⁻¹ x 320.15 K / 0.54 L

= 76.8 atm

To know more about ideal gas law, refer here:

https://brainly.com/question/28257995#

#SPJ11

The quantity of lithium iodide produced in the reaction was determined to be 7.8 moles.

The balanced chemical equation for the reaction between lithium carbonate (Li₂CO₃) and potassium iodide (KI) is:

2 Li₂CO₃ + 2 KI → 2 K₂CO₃ + 4 LiI

From the balanced equation, we can see that for every 2 moles of Li₂CO₃ reacted, 4 moles of LiI are produced.

Therefore, if we have 3.9 moles of K₂CO₃, we can calculate the moles of LiI produced as:

3.9 moles K₂CO₃ × (4 moles LiI / 2 moles Li₂CO₃) = 7.8 moles LiI

Therefore, 7.8 moles of lithium iodide were produced in the reaction.

To know more about lithium iodide, refer here:

https://brainly.com/question/2732123#

#SPJ11

The addition of HBr to 2-methyl-2-butene is an example of an electrophilic addition reaction. The correct answer is (2)

The double bond in 2-methyl-2-butene is attacked by the electrophilic H+ ion from HBr, leading to the formation of a carbocation intermediate. The bromide ion (Br-) then attacks the carbocation, leading to the formation of a new carbon-bromine bond. The major organic product obtained from the addition reaction of HBr to 2-methyl-2-butene is 2-bromo-2-methylbutane, which is also known as t-butyl bromide. This is because the addition of HBr occurs at the tertiary carbon, leading to the formation of a tertiary carbocation intermediate, which is relatively stable. Therefore, the correct answer is (2) 2-bromo-2-methylbutane.

To know more about electrophilic addition reaction, here

brainly.com/question/16811879

#SPJ4

--The complete Question is, what is the major organic product from the addition reaction of hbr to 2-methyl-2-butene? group of answer choices

1. 2-bromopentane 2-bromo-2-methylbutane

2. 1-bromo-2-methylbutane

3. 1-bromo-3-methylbutane

4. 2-bromo-3-methylbutane=--

About  739,982.4 Joules energy is required to raise the temperature of 100.0 grams of water from -269 degrees Celsius to 1500 degrees Celsius.

The formula for the change in heat is,

Q = mcΔT, the amount of energy required is Q, m is the mass of water, specific heat capacity of water is c, the change in temperature is ΔT,

ΔT = 1500°C - (-269°C)

ΔT = 1769°C

Next, we can look up the specific heat capacity of water, which is 4.184 J/g°C. Then, we can substitute the values into the formula,

Q = 100.0 g * 4.184 J/g°C * 1769°C

Q = 739,982.4 J

Therefore, it would require 739,982.4 Joules of energy to raise the temperature of 100.0 grams of water from -269 degrees Celsius to 1500 degrees Celsius.

To know more about change in heat, visit,

https://brainly.com/question/8828503

#SPJ4

The words listed under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew" would be: Rhinoceros, Hare, Onions, Water, Broth, Salt, Pepper, and Hair.

Under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew," the following words would be listed:

Hair (Note: this is an unusual ingredient and may be questioned as to its necessity in the recipe)

Learn more about Ingredients here: https://brainly.com/question/28000963

#SPJ1

The molarity of the solution diluted to the 1200.0 ml volume is found to be 0.220M.

The number of moles of H₂SO₄ in the original 22 mL solution can be calculated using the following formula,

moles of H₂SO₄ = Molarity × Volume (in liters)

22 mL = 22/1000 L

= 0.022 L

Substituting the given values, we get,

moles of H₂SO₄ = 12 M × 0.022 L

= 0.264 moles

The number of moles of H₂SO₄ will not change once the solution is diluted to a volume of 1200.0 mL since no H₂SO₄ is added or taken away. Consequently, the following formula can be used to determine the molarity of the diluted solution:

Molarity = moles of H₂SO₄ / Volume (in liters)

Again, we need to convert the volume to liters,

1200.0 mL = 1200.0/1000 L

= 1.200 L

Substituting the values, we get,

Molarity = 0.264 moles / 1.200 L

= 0.220 M

Therefore, the molarity of the diluted solution is 0.220 M.

To know more about molarity, visit,

https://brainly.com/question/30404105

#SPJ4

if the unknown solution is mixed with potassium carbonate, the reaction will proceed differently depending on whether the unknown solution is strontium nitrate or magnesium nitrate.

Mixing the unknown solution with potassium sulfate will not provide any useful information to identify whether the unknown solution is strontium nitrate or magnesium nitrate. This is because neither strontium nor magnesium sulfate has distinctive properties that allow them to be easily distinguished from one another.

However, When mixed with strontium nitrate, potassium carbonate will form a white precipitate of strontium carbonate, while no reaction will occur when mixed with magnesium nitrate. Therefore, the presence of a white precipitate after mixing with potassium carbonate indicates that the unknown solution is strontium nitrate.

In summary, to identify whether the unknown solution is strontium nitrate or magnesium nitrate, the solution should be mixed with potassium carbonate. If a white precipitate forms, the solution is strontium nitrate. If no reaction occurs, the solution is magnesium nitrate. Mixing the unknown solution with potassium sulfate will not provide any useful information.

For more such questions on magnesium, click on:

https://brainly.com/question/30333465

#SPJ11

Out of the options provided, cooler temperatures allow CO2 to remain in solution the longest.

When a soft drink is opened, CO2 molecules start to escape from the solution and accumulate in the headspace of the container. Higher temperatures increase the kinetic energy of the CO2 molecules, causing them to move faster and escape the solution more quickly. In contrast, cooler temperatures reduce the kinetic energy of the CO2 molecules, slowing down their movement and allowing them to remain in solution for a longer period of time.

Reduced air pressure, exposure to direct sunlight, and increased air currents can all further accelerate the loss of carbonation in an open soft drink. Reduced air pressure lowers the atmospheric pressure, which decreases the solubility of CO2 in the liquid. Exposure to direct sunlight increases the temperature of the drink and causes the CO2 molecules to escape more quickly. Increased air currents can also cause CO2 to escape more quickly by creating turbulence in the liquid.

Therefore, to keep a soft drink fizzy for longer, it is best to store it in a cool place and avoid exposing it to direct sunlight, reducing air pressure or increased air currents.

Know more about Kinetic Energy here:

https://brainly.com/question/26472013

#SPJ11

Answer:

Reduction

Explanation:

when an atom or ion decreases in oxidation state

The process in which an atom or ion experiences a decrease in its oxidation state is called reduction.

Reduction is the opposite of oxidation, which is the process in which an atom or ion experiences an increase in its oxidation state. In a redox (reduction-oxidation) reaction, one species undergoes reduction while the other undergoes oxidation.

In the process of reduction, the species gains electrons, resulting in a decrease in its oxidation state. The reducing agent is the species that donates electrons, while the oxidizing agent is the species that accepts electrons.

Reduction reactions are important in many chemical and biological processes, including metabolism, photosynthesis, and corrosion. The study of redox reactions is important in understanding the behavior of chemicals in natural and industrial processes.

To know more about oxidation state, refer here:

https://brainly.com/question/31688257#

#SPJ11

The molecular mass of the unknown acid is 100 g/mol.

To find the molecular mass, first determine the moles of acid present. Since 50.0 mL of 0.25 M NaOH is required for neutralization, calculate the moles of NaOH using the formula: moles = Molarity × Volume (in L).

Moles of NaOH = 0.25 mol/L × (50.0 mL × 0.001 L/mL) = 0.0125 mol

Since the acid donates one proton per molecule, the moles of acid present equal the moles of NaOH: 0.0125 mol.

Next, find the mass of one mole of the unknown acid. You have 1.0 g of the acid, so divide the mass by the moles to get the molecular mass:

Molecular mass = Mass / Moles = 1.0 g / 0.0125 mol = 100 g/mol

To know more about molecular mass click on below link:

https://brainly.com/question/31476184#

#SPJ11

The three ions containing phosphorus are phosphate (PO₄³⁻), hydrogen phosphate (HPO₄²⁻), and dihydrogen phosphate (H₂PO₄⁻).

The pattern observed is that adding hydrogen atoms successively reduces the negative charge of the ion by one unit.


1. Observe the formulas of the three ions: PO₄³⁻, HPO₄²⁻, and H₂PO₄⁻.
2. Notice that hydrogen atoms are added successively: 0, 1, and 2.
3. Observe the charges of the ions: -3, -2, and -1.
4. Recognize the pattern: adding hydrogen atoms reduces the negative charge by one unit.

In other instances where hydrogen is added to polyatomic ions, a similar pattern occurs. The negative charge decreases as more hydrogen atoms are added. This pattern is consistent across various polyatomic ions containing hydrogen.

To know more about polyatomic ions click on below link:

https://brainly.com/question/12852496#

#SPJ11

There are 2.4 moles of C2O4^2- in the given sample

To determine the number of moles of C2O4 in the given sample, we need to use the balanced chemical equation of the reaction between MnO4 and C2O4. The equation is:

MnO4- + 5C2O4^2- + 8H+ → Mn2+ + 10CO2 + 4H2O

From the equation, we can see that 1 mole of MnO4- reacts with 5 moles of C2O4^2-. Therefore, if we have 0.48 moles of MnO4- at the endpoint, we can calculate the number of moles of C2O4^2- as follows:

0.48 moles MnO4- x (5 moles C2O4^2-/1 mole MnO4-) = 2.4 moles C2O4^2-

Therefore, there are 2.4 moles of C2O4^2- in the given sample.

It is important to note that moles are a unit of measurement used in chemistry to represent the amount of a substance, and it is equal to the mass of a substance in grams divided by its molar mass. In this case, we were able to determine the number of moles of C2O4^2- in the sample by using the stoichiometry of the balanced chemical equation.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

Answer: 17.49L

Explanation:

STP is 1atm and 273.15K

V=nRT/

V=(0.78)(0.0821)(273.15)/1

V= 17.49L