The current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.
The amount of tin plated out can be calculated using Faraday's law of electrolysis, which states:
Mass of substance plated = (Current x Time x Atomic weight) / (Valency x Faraday's constant)
The atomic weight of tin is 118.71 g/mol, and its valency is 2 (since it forms Sn2+ ions in the solution). The Faraday's constant is 96,485 C/mol.
Plugging in the given values, we get:
6.70 g = (4.82 A x t x 118.71 g/mol) / (2 x 96485 C/mol)
Solving for t, we get:
t = (6.70 g x 2 x 96485 C/mol) / (4.82 A x 118.71 g/mol)
t = 10.33 hours
Therefore, the current would have to be applied for approximately 10.33 hours to plate out 6.70 g of tin.
To know more about Faraday's law refer to-
https://brainly.com/question/1640558
#SPJ11
Calculate the moles of barium phosphate that will react with 1.60 g of aluminum hydroxide. you need to write and balance the equation, then solve it.
A total of 0.0103 moles of barium phosphate will react with 1.60 g of aluminum hydroxide.
The balanced chemical equation for the reaction between barium phosphate and aluminum hydroxide is:
Ba₃(PO₄)₂ + 2 Al(OH)₃ → 2 AlPO₄ + 3 Ba(OH)₂
To calculate the moles of barium phosphate that will react with 1.60 g of aluminum hydroxide, we need to convert the given mass of aluminum hydroxide into moles using its molar mass:
Molar mass of Al(OH)₃ = 78 g/mol
Number of moles of Al(OH)₃ = 1.60 g / 78 g/mol = 0.0205 mol
According to the balanced chemical equation, 2 moles of Al(OH)3 react with 1 mole of Ba3(PO4)2. Therefore, the number of moles of Ba₃(PO₄)₂ required can be calculated as:
Number of moles of Ba₃(PO₄)₂ = (0.0205 mol Al(OH)₃) / 2 = 0.0103 mol
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
Calculate the mass (amu) of 75 atom of AL
The atomic mass of aluminum (Al) is approximately 26.98 amu. Therefore, the mass of one Al atom is 26.98 amu.
To calculate the mass of 75 Al atoms, we can multiply the mass of one Al atom by 75:
Mass of 75 Al atoms = 75 atoms x 26.98 amu/atom
Mass of 75 Al atoms = 2024.5 amu
Therefore, the mass of 75 Al atoms is 2024.5 amu.
Consider the following intermediate chemical equations. 2H (g) + O2(g) â 2H, O( H (9)+F (9) ⺠2HF(g) In the final chemical equation, HF and O2 are the products that are formed through the reaction between H2O and F2. Before you can add these intermediate chemical equations, you need to alter them by multiplying the O second equation by 2 and reversing the first equation. O first equation by 2 and reversing it. O first equation by (12) and reversing the second equation. Second equation by 2 and reversing it. â
The correct set of modifications to the given chemical equations is to multiply the second equation by 2 and reverse it, option D is correct.
To obtain the final chemical equation, we need to cancel out the reactants that appear as intermediates in the two given chemical equations. In this case, we need to cancel out H₂ and F₂. The second equation shows that one H₂ molecule reacts with one F₂ molecule to produce two HF molecules. Therefore, we need two molecules of the second equation, which can be achieved by multiplying it by 2.
However, the second equation has to be reversed before multiplying it by 2. This is because, in the final chemical equation, we need to form HF and O₂ from H₂O and F₂, whereas the given second equation shows the formation of HF from H₂ and F₂, option D is correct.
To learn more about equation follow the link:
brainly.com/question/30087623
#SPJ4
The complete question is:
Consider the following intermediate chemical equations.
2H₂(g) + O₂(g) → 2H₂O(l)
H₂(g) + F₂(g) → 2HF(g)
In the final chemical equation, HF and O₂ are the products that are formed through the reaction between H₂O and F₂. Before you can add these intermediate chemical equations, you need to alter them by multiplying the:
A) second equation by 2 and reversing the first equation.
B) first equation by 2 and reversing it.
C) first equation by (1/2) and reversing the second equation.
D) second equation by 2 and reversing it.
An ecosystem is a term used by scientists to describe a specific level of organization in an environment. Which of the
following lists make up an ecosystem? (AKS 6a)
A soil, air, sunlight, rocks, rain
O B. Different populations of wildebeest
O C. Leaopards, giraffes, antelope, hyenas
OD. Rain, grass, worms, jackals, lions, sunlight
An ecosystem is an interconnected set of living and non-living components that interact and influence each other to form a functional unit.
Here all options are correct
As such, it is a complex system of energy and material exchanges between its components. A list of components that make up an ecosystem can include soil, air, sunlight, rocks, rain, and different populations of living organisms. The living components of an ecosystem include plants, animals, and microorganisms, such as worms and jackals. These organisms interact and depend on each other for survival, such as the leopards, giraffes, antelope, and hyenas that rely on the grass and other plants that are watered by the rain.
The sunlight provides energy for photosynthesis, which is essential for the production of food and oxygen. The rocks, soil, and air in the environment provide the physical structure that allows different organisms to interact and thrive. All of these components contribute to the health of an ecosystem, and each component plays an important role in maintaining the balance of the ecosystem.
Know more about ecosystem here
https://brainly.com/question/31459119#
#SPJ11
In a boiling pot of water are a metal spoon and a wooden spoon of equal masses/size. Which spoon would likely be more painful (higher in temperature) to grab? Assume that both spoons have been in the same pot of boiling water for the same amount of time. Explain this phenomena using the following terms: Heat, Mass, Temperature, Specific Heat Capacity, Heat Flow. Consider all possible factors in your explanation
When we place a metal spoon and a wooden spoon of equal masses/size in a boiling pot of water for the same amount of time, the metal spoon would likely be more painful to grab than the wooden spoon. This is because of the differences in their specific heat capacities.
Specific heat capacity is the amount of heat required to raise the temperature of a substance by 1 degree Celsius per unit mass. Metals have a lower specific heat capacity than wood, which means that they require less heat to increase their temperature than wood does.
As a result, the metal spoon would heat up more quickly than the wooden spoon in the boiling water.
Heat flow is the transfer of thermal energy from one object to another due to a temperature difference between them. In this case, heat flows from the boiling water to the spoons. The metal spoon would conduct heat better than the wooden spoon due to its higher thermal conductivity.
This means that the metal spoon would transfer heat more quickly from the boiling water to your hand, making it more painful to grab.
Mass is also a factor to consider as it affects the amount of heat absorbed by the spoons. However, since the spoons have equal masses, mass does not play a significant role in this scenario.
In summary, the metal spoon would likely be more painful to grab because it has a lower specific heat capacity and higher thermal conductivity than the wooden spoon, which causes it to heat up more quickly and transfer heat more efficiently from the boiling water to your hand.
To know more about specific heat capacities, visit:
https://brainly.com/question/29766819#
#SPJ11
An iron reacts with oxygen to produce iron (ii) oxide. if you have 23.1 g of iron and 53.22 g of oxygen, what is the maximum amount of product formed in grams?
The maximum amount of iron (II) oxide that can be formed is 176.9 g if 23.1 g of iron reacts with 53.22 g of oxygen to produce iron (ii) oxide.
The balanced chemical equation for the reaction between iron and oxygen to produce iron (II) oxide is:
4Fe + 3O₂ → 2Fe₂O₃
From the equation, we can see that 4 moles of iron react with 3 moles of oxygen to produce 2 moles of iron (II) oxide.
Calculate the number of moles of each reactant using their respective molar masses:
Number of moles of iron = 23.1 g ÷ 55.845 g/mol
= 0.414 moles
Number of moles of oxygen = 53.22 g ÷ 32 g/mol
= 1.663 moles
Since the stoichiometric ratio of iron to oxygen is 4:3, we can see that oxygen is the limiting reactant because there are only 3 moles of oxygen available for every 4 moles of iron required.
Number of moles of Fe₂O₃ = 2 ÷ 3 × 1.663
= 1.108 moles
Mass of Fe₂O₃ = 1.108 moles × 159.69 g/mol
= 176.9 g
To learn more about oxide follow the link:
brainly.com/question/15319480
#SPJ4
If you started with 20. 0 g of a radioisotope and waited for 3 half-lives to pass, then how much would remain?
After three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.
If a radioisotope has a half-life of t, then the amount of the radioisotope that remains after n half-lives can be calculated using the formula:
[tex]N = N0 * (1/2)^n[/tex]
where N0 is the initial amount of the radioisotope.
If three half-lives have passed, then n = 3. Using the given initial amount of 20.0 g, we can calculate the amount that remains after three half-lives as follows:
[tex]N = N0 * (1/2)^n\\N = 20.0 g * (1/2)^3[/tex]
N = 20.0 g * (1/8)
N = 2.50 g
Therefore, after three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.
To know more about radioisotope refer to-
https://brainly.com/question/13076859
#SPJ11
Which refers to a phenomenon that occurs as solar radiation is absorbed by Earth’s surface and re-radiated into the atmosphere, where it gets trapped and warms the Earth? energy budgeting greenhouse effect solar circulation incoming radiation
The phenomenon being referred to in this question is the greenhouse effect.
This effect occurs as solar radiation is absorbed by Earth's surface and re-radiated into the atmosphere. Some of this energy gets trapped in the atmosphere by greenhouse gases such as carbon dioxide, methane, and water vapor. This trapped energy warms the Earth, leading to global climate change.
To explain further, the Earth has an energy budgeting system where incoming radiation from the sun is balanced by outgoing radiation from the Earth's surface and atmosphere. However, due to human activities such as burning fossil fuels and deforestation, the concentration of greenhouse gases in the atmosphere has increased.
This increase in greenhouse gases has disrupted the balance of the energy budgeting system, leading to an overall warming of the Earth.
Solar circulation also plays a role in the greenhouse effect, as it affects the distribution of heat and energy around the planet. As the Earth's surface warms, air and water move around the globe, distributing heat and energy. This solar circulation helps to regulate the Earth's temperature, but it can also contribute to changes in climate patterns and weather events.
In summary, the greenhouse effect is a phenomenon that occurs as solar radiation is absorbed by the Earth's surface and re-radiated into the atmosphere. This trapped energy warms the Earth, leading to global climate change.
The greenhouse effect is a result of an imbalance in the Earth's energy budgeting system, caused by the increase in greenhouse gases in the atmosphere. Solar circulation also plays a role in regulating the Earth's temperature and climate patterns.
To know more about greenhouse effect, visit:
https://brainly.com/question/13706708#
#SPJ11
Answer:
greenhouse Effect (B , edge 2023)
Explanation:
According to the lab introduction in your laboratory manual, the equation for sodium
carbonate dissolving in water is:
3
Na2CO3 + 2H20 – 2Na+ + 2OH- + H2CO3
When this process occurs, sodium carbonate does not 100% separate into ions.
There is always some sodium carbonate in solution.
Based on this reaction, explain whether Sample A or Sample B is most alkaline and
why.
Sample A or Sample B cannot be definitively determined as more alkaline based on the given information. The equation for sodium carbonate dissolving in water shows that it produces both sodium ions (Na⁺) and hydroxide ions (OH⁻), which are the ions responsible for making a solution alkaline.
However, the fact that not all of the sodium carbonate dissociates into ions means that the concentration of alkaline ions in the solution will be less than the total concentration of sodium carbonate added. Therefore, the alkalinity of a sample cannot be determined solely based on the amount of sodium carbonate present.
Other factors, such as the presence of other alkaline substances or the pH of the solution, would need to be considered to determine which sample is more alkaline.
To know more about the sodium carbonate refer here :
https://brainly.com/question/13565765#
#SPJ11
Describe an experiment that can be conducted to show that living materials contain water
One simple experiment that can be conducted to demonstrate that living materials contain water is heating of simple matter.
What is the experiment to demonstrate presence of water?The following experimental procedure deminstrates the presence of water on living matter.
Collect a sample of plant leaf Weigh the sample and record its initial weight.Place the sample in a dry, airtight container and heat it in an ovenRemove the container from the oven and allow it to cool to room temperature in a desiccator.Weigh the sample again and record its final weight.If the sample contains water, the final weight will be less than the initial weight, indicating that some of the water has been lost due to the heating process.
Learn more about experiments here: https://brainly.com/question/26117248
#SPJ1
How many moles of SiC are produced from 9. 3 moles of C?
SiO2 + C -> SiC + CO
I'm dyslexic and I put the completely wrong formula for my previous question, please ignore it
According to the balanced chemical equation, 1 mole of SiC is produced from 1 mole of C. Therefore, the number of moles of SiC produced from 9.3 moles of C is also 9.3 moles.
The balanced chemical equation for the reaction between SiO₂ and C to produce SiC and CO is:
SiO₂ + C ⇒ SiC + CO
The stoichiometric coefficients of C and SiC are both 1. This means that for every 1 mole of C reacted, 1 mole of SiC is produced. Therefore, if we have 9.3 moles of C, we can expect to produce 9.3 moles of SiC.
It is important to note that the balanced chemical equation assumes that the reaction goes to completion, meaning that all of the reactants are consumed and converted into products. In reality, some of the reactants may not be fully consumed, leading to a lower yield of the desired product.
To learn more about moles follow the link:
brainly.com/question/31597231
#SPJ4
What mass in grams of hydrogen gas is produced if 20. 0 mol of zn are added to excess hydrochloric acid according to the equation
zn(s) +2hcl(aq) --> zncl₂(aq) + h₂(g)?
First, we need to use stoichiometry to find out how many moles of hydrogen gas are produced. From the balanced chemical equation, we can see that for every 1 mole of zinc (Zn), 1 mole of hydrogen gas (H2) is produced. Therefore, if we have 20.0 mol of Zn, we will also produce 20.0 mol of H2.
Next, we can use the formula for the mass of a gas:
mass = molar mass x number of moles
The molar mass of hydrogen gas is approximately 2.02 g/mol. Therefore, the mass of 20.0 mol of hydrogen gas would be:
mass = 2.02 g/mol x 20.0 mol
mass = 40.4 g
So, 40.4 grams of hydrogen gas are produced when 20.0 mol of Zn are added to excess hydrochloric acid.
Learn more about Hydrogen Gas : https://brainly.com/question/19813237
#SPJ11
When water boils, what are the bubbles composed of?.
When water boils, the bubbles are composed of water vapor or steam.
The bubbles form when the water is heated to its boiling point and the water molecules gain enough thermal energy to overcome the intermolecular forces holding them together in the liquid state.
As the water molecules escape into the gaseous state, they form bubbles that rise to the surface of the liquid and release the steam into the atmosphere.
The bubbles are filled with water vapor, which is less dense than liquid water and has a higher thermal energy due to the increased molecular motion in the gas phase. Once the bubbles reach the surface, they burst and release the steam into the air.
To know more about water vapor refer to-
https://brainly.com/question/14529481
#SPJ11
you are separating anthracene from benzoic acid via an extraction between ethyl acetate and a basic aqueous solution in a separatory funnel. how would you recover the benzoic acid? group of answer choices collect the top layer, dry with na2so4, filter to remove the na2so4, and evaporate the solvent. collect the bottom layer, dry with na2so4, filter to remove the na2so4, and evaporate the solvent. collect the top layer and add hcl to precitipate the compound. collect the bottom layer and add hcl to precipitate the compound. collect the top layer and add naoh to precipitate the compound. collect the bottom layer and add naoh to precipitate the compound.
To recover the benzoic acid, collect the bottom layer, dry it with [tex]Na_{2} SO_{4}[/tex], filter to remove [tex]Na_{2} SO_{4}[/tex], and evaporate the solvent. The option 4 is correct.
This is because benzoic acid is a carboxylic acid and will react with the basic aqueous solution to form a water-soluble carboxylate salt. As a result, benzoic acid will be in the aqueous layer, which is the bottom layer. Ethyl acetate is the organic solvent and will form the top layer. By collecting the bottom aqueous layer, we can isolate the benzoic acid. Drying the solution with [tex]Na_{2} SO_{4}[/tex] removes any remaining water, and evaporating the solvent leaves behind the solid benzoic acid. Option 4 is correct answer.
To know more about benzoic acid, here
brainly.com/question/24052816
#SPJ4
--The complete Question is, you are separating anthracene from benzoic acid via an extraction between ethyl acetate and a basic aqueous solution in a separatory funnel. how would you recover the benzoic acid? group of answer choices
1. collect the top layer, dry with na2so4,
2. filter to remove the na2so4, and evaporate the solvent.
3. collect the bottom layer, dry with na2so4,
4. collect the bottom layer and add hcl to precipitate the compound.
5. collect the top layer and add hcl to precitipate the compound. --
The mass of marshmallow and a food holder weighs 5. 08 g. After burning the marshmallow, the marshmallow and food holder have a mass of 5. 00 g. Determine the mass of food burned. (Don't forget units. )
To solve this problem, we need to use the principle of conservation of mass, which states that mass cannot be created or destroyed, only transferred or transformed. First, we need to find the initial mass of the marshmallow and food holder, which is 5.08 g. Then, after burning the marshmallow, the new mass of the marshmallow and food holder is 5.00 g.
To determine the mass of food burned, we need to subtract the new mass from the initial mass:
5.08 g - 5.00 g = 0.08 g
Therefore, the mass of food burned is 0.08 g.
It's important to note that we cannot determine the mass of the marshmallow that was burned specifically, as we do not have that information. However, we can determine the total mass of food burned.
In general, it's important to be aware of the principle of conservation of mass in all types of chemical reactions and food preparation. While we may not always measure or track the exact amounts of ingredients we use, understanding how mass is conserved can help us better understand and control the outcomes of our cooking and baking.
To know more about conservation of mass refer here
https://brainly.com/question/13383562#
#SPJ11
Using the lewis dot structures of magnesium and oxygen, predict the ionic formula.
Magnesium loses two electrons to oxygen to form Mg²⁺ and O²⁻ ions. The ionic formula for this compound can be predicted by writing the formula unit that balances the charges of the two ions. The ionic formula for magnesium oxide is MgO.
The Lewis dot structure of magnesium is Mg with two dots representing its valence electrons. The Lewis dot structure of oxygen is O with six dots representing its valence electrons.
Magnesium and oxygen form an ionic compound because magnesium loses two electrons to oxygen to form Mg²⁺ and O²⁻ ions. The ionic formula for this compound can be predicted by writing the formula unit that balances the charges of the two ions.
Since Mg²⁺ has a 2+ charge and O²⁻ has a 2- charge, the ionic formula for magnesium oxide is MgO.
To know more about the Lewis dot structure refer here :
https://brainly.com/question/20300458#
#SPJ11
1. Write a mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid. Be as complete as possible and show electron flow for all steps. You should clearly indicate the mechanistic pathways that lead to each of the products formed in the reaction (there is no need to duplicate common steps, but at some point the pathways diverge)
The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is Protonation of the alcohol group by phosphoric acid.
What is Protonation?Protonation is the process of adding a proton (hydrogen ion) to a molecule or atom. The process is also known as hydrogenation or hydrideation. It occurs when a molecule or atom gains a proton, which imparts a positive charge on the molecule or atom.
The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is as follows:
Step 1: Protonation of the alcohol group by phosphoric acid.
Phosphoric acid (H₃PO₄) donates a proton to the OH group of 2-methylcyclohexanol, forming an oxonium ion (H₃O⁺). Electron flow is shown in the following diagram:
[tex]O-H + H_3PO4 \rightarrow H_3O^+ + PO_4^3-[/tex]
Step 2: Deprotonation by a base.
The oxonium ion (H3O+) is then deprotonated by a base (e.g. a strong base such as NaOH). Electron flow is shown in the following diagram:
[tex]H_3O^+ + B^- \rightarrow H_2O + BH^+[/tex]
Step 3: Rearrangement of the molecule.
The deprotonated molecule rearranges to form a more stable carbocation intermediate. Electron flow is shown in the following diagram:
[tex]BH^+ \rightarrow B^+ + H^-[/tex]
Step 4: Nucleophilic attack by the alcohol group.
The carbocation intermediate is attacked by the OH group of 2-methylcyclohexanol, forming a new carbon-oxygen bond. Electron flow is shown in the following diagram:
[tex]C^+ + OH- \rightarrow C-O + H^+[/tex]
Step 5: Loss of a proton.
The molecule then loses a proton, forming the product of the reaction. Electron flow is shown in the following diagram:
[tex]C-O + H^+ \rightarrow C=O + H_2O[/tex]
To learn more about Protonation
https://brainly.com/question/15215343
#SPJ4
The most energy-intensive process (i.e. requires the most energy) in a cell is
dna replication..
carbohydrate synthesis.
transcription.
lipid catabolism.
translation.
DNA replication is the most energy-intensive process in a cell. Option A is correct.
The replication of DNA requires the unwinding of the double helix structure and the separation of the two strands, which is facilitated by enzymes such as helicases. The replication process also involves the synthesis of new nucleotide strands, which requires the input of energy in the form of ATP (adenosine triphosphate) molecules.
While other cellular processes such as transcription, translation, and lipid catabolism also require energy, DNA replication is particularly energy-intensive due to the large size of the DNA molecule and the complexity of the replication machinery involved.
Additionally, errors in the DNA replication process can lead to mutations that can have serious consequences for the cell and the organism as a whole, so the replication process must be tightly regulated and closely monitored, which also requires energy expenditure.
Hence, A. is the correct option.
To know more about DNA replication here
https://brainly.com/question/21675925
#SPJ4
--The given question is incomplete, the complete question is
"The most energy-intensive process (i.e. requires the most energy) in a cell is A) DNA replication B) carbohydrate synthesis C) transcription D) lipid catabolism. E) translation."--
What is the partial pressure of so2 in equilibrium with air and solid cao if po2 in air is 0. 21 atm?.
The partial pressure of SO₂ in equilibrium with the air and solid CaO if PO₂ in the air is 0.21 atm is 1.41 atm.
To determine the partial pressure of SO₂ in equilibrium with the air and solid CaO, we need to use the equation:
CaO(s) + SO₂(g) ⇌ CaSO₃(s)
This equation represents the equilibrium reaction between solid CaO, gaseous SO₂, and solid CaSO₃. At equilibrium, the partial pressures of SO₂ and O₂ in the air will determine the equilibrium constant of the reaction.
Assuming that the pressure of O₂ in the air is 0.21 atm, we can use the ideal gas law to calculate the partial pressure of SO₂:
PV = nRT
where P is the partial pressure of SO₂, V is the volume of the system, n is the number of moles of SO₂, R is the ideal gas constant, and T is the temperature.
At equilibrium, the reaction quotient Qc is equal to the equilibrium constant Kc:
Qc = [CaSO₃]/[CaO][SO₂]
Kc = [CaSO₃]/[CaO][SO₂]
Since CaO is solid, its concentration is constant, so we can write:
Kc = [CaSO₃]/[SO₂]
At equilibrium, Qc = Kc, so we can use this equation to solve for the partial pressure of SO₂:
Kc = [CaSO₃]/[SO₂]
Kc = 0.71 (at 1000 K)
[CaSO₃] = 1 (assuming that the CaO is fully reacted)
[SO₂] = [CaSO₃]/Kc = 1/0.71 = 1.41 atm
Learn more about partial pressure at https://brainly.com/question/19813237
#SPJ11
For #3 and #4, complete the synthesis reactions by writing the word equation for each
3. potassium + chlorine →
4. hydrogen + iodine →
potassium + chlorine → potassium chloride
hydrogen + iodine → hydrogen iodide
A synthesis reaction is a type of chemical reaction in which two or more simple substances combine to form a more complex product. In a synthesis reaction, the reactants come together to create a single compound, usually with the release of energy in the form of heat or light. The general equation for a synthesis reaction is A + B → AB, where A and B are the reactants, and AB is the product.
Synthesis reactions are also known as combination reactions because they involve the combination of two or more substances to form a new compound.
Learn more about synthesis reaction, here:
https://brainly.com/question/16987748
#SPJ1
Calculate the mass (in grams) of an ionic compound (molar mass 153. 5g/mol) that is dissolved
in 100 g H2O if the 0. 531 M solution formed has a density of 1. 094 g/mL.
The mass of the ionic compound dissolved in 100 g of water is 7.44 grams.
To solve this problem, we need to use the formula:
m = n x M x MW
where m is the mass of the compound in grams, n is the number of moles of the compound, M is the molarity of the solution, and MW is the molar mass of the compound.
First, we need to calculate the number of moles of the compound dissolved in 100 g of water:
density of solution = mass of solution / volume of solution
volume of solution = mass of solution / density of solution = 100 g / 1.094 g/mL = 91.29 mL = 0.09129 L
moles of compound = M x volume of solution = 0.531 mol/L x 0.09129 L = 0.0485 mol
Now, we can calculate the mass of the compound:
m = n x M x MW = 0.0485 mol x 153.5 g/mol = 7.44 g
Therefore, the mass of the ionic compound dissolved in 100 g of water is 7.44 grams.
To know more about ionic compound refer to-
https://brainly.com/question/3222171
#SPJ11
why do you think the h-bonds only last a short time before breaking and reforming?
Answer:
because they are poorly made
Explanation:
Suppose digital technology, gold jewelry, and paper money caused the need for silver to no longer exist. would silver still be considered an ore? discuss
Yes, silver would still be considered an ore even if its demand and usage in digital technology, gold jewelry, and paper money decreased to the point of non-existence. Silver is a naturally occurring metallic element that is found in various ores, and its classification as an ore is based on its physical and chemical properties, regardless of its market demand. Therefore, even if the uses of silver in various industries decline, it would still be classified as an ore.
An ore is a naturally occurring mineral or rock containing valuable substances, typically metals, that can be extracted through mining and processed for various purposes. Even if the demand for silver decreases due to digital technology, gold jewelry, and paper money, it would not change the fact that silver is a naturally occurring material containing a valuable metal. The classification of silver as an ore is independent of its current or potential use in human activities.
Learn more about silver at https://brainly.com/question/29595928
#SPJ11
PLEASE HELP!!
if 9. 45 moles of C2H2 are burned how many moles of O2 are needed?
To determine the number of moles of O2 needed to burn 9.45 moles of C2H2, we first need to write down the balanced chemical equation for the combustion of acetylene (C2H2):
2 C2H2 + 5 O2 → 4 CO2 + 2 H2O
From this equation, we can see that 5 moles of O2 are required to burn 2 moles of C2H2. To find out how many moles of O2 are needed for 9.45 moles of C2H2, we can use a simple proportion:
(5 moles O2 / 2 moles C2H2) = (x moles O2 / 9.45 moles C2H2)
To solve for x (moles of O2 needed), simply cross-multiply and divide:
x = (5 moles O2 * 9.45 moles C2H2) / 2 moles C2H2
x ≈ 23.63 moles O2
Therefore, approximately 23.63 moles of O2 are needed to burn 9.45 moles of C2H2.
#SPJ11
what happens to a rock when its weathered? A It is moved by wind, air, or water
Fragments of weathered rocks can be moved by wind, air, or water.
What is weathering?Weathering is a natural process that breaks down rocks and minerals into smaller pieces. When a rock is weathered, it may physically or chemically change due to exposure to elements such as water, wind, ice, and temperature changes.
Physical weathering refers to the breakdown of rock through mechanical processes, such as abrasion, pressure changes, and freeze-thaw cycles.
Chemical weathering involves the breakdown of rock through chemical reactions, such as oxidation, hydrolysis, and dissolution.
In both cases, the resulting smaller pieces of rock or mineral fragments may be moved by wind, air, or water, and may be transported to new locations.
More on rock weathering can be found here: https://brainly.com/question/29762374
#SPJ1
A container is filled with helium and nitrogen gas. A hole is poked into the container and the gases are
allowed to effuse. (A) Which gas would effuse faster? (B) Calculate the rate of effusion of helium to
nitrogen gas. (C) If it takes nitrogen gas 22 sec to effuse, how long would it take the helium gas?
(A) Helium gas would effuse faster than nitrogen gas. (B) The rate of effusion of helium to nitrogen gas is approximately 4:1. (C) It would take helium gas approximately 5.5 seconds to effuse.
Part (A): The rate of effusion is directly proportional to the velocity of the gas particles, which is inversely proportional to the square root of their masses.
Helium gas has a smaller molar mass (4 g/mol) than nitrogen gas (28 g/mol), which means its particles have a higher velocity and would effuse faster.
Part (B): According to Graham's law of effusion, the rate of effusion of two gases is inversely proportional to the square root of their molar masses.
Therefore, the rate of effusion of helium to nitrogen gas can be calculated as the square root of the ratio of their molar masses, which is approximately 4:1.
Part (C): Using Graham's law of effusion again, we can set up a proportion to find the time it would take helium gas to effuse if nitrogen gas takes 22 seconds.
The ratio of the square roots of their molar masses is 1:√7, so the proportion is:
√(4/28) : √(1/√7) = 22 : x
Solving for x, we get approximately 5.5 seconds.
To know more about Graham's law, refer here:
https://brainly.com/question/8804761#
#SPJ11
AlCl3 + 3Li --> 3LiCl + Al
If you are given 8. 00 g of Li calculate the number of grams of aluminum produced
When 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.
The molar mass of lithium (Li)= 6.94 g/mol
Moles of Li = mass of Li / molar mass of Li= 8.00 g / 6.94 g/mol = 1.154 moles
Now, 3 moles of Li produce 1 mole of Al
moles of Al produced = 1.154 moles / 3 = 0.385 moles
The molar mass of aluminum (Al)= 26.98 g/mol
Mass of Al = moles of Al × molar mass of Al= 0.385 moles × 26.98 g/mol = 10.39 g
So, when 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.
To know more about stoichiometric calculations visit:
https://brainly.com/question/23742235
#SPJ11
PLEASE HELP. Complete the following table.
[H3O+] [OH−] pOH pH Acidic or Basic
1. 0×10−8 1. 0×10−6 6. 00 8. 00 basic
_____ _____ _____ 3. 05 _____
9. 7×10−9 _____ _____ _____ _____
_____ _____ _____ 13. 79 _____
_____ 9. 6×10−11 _____ _____ _____
Part A
Complete the first column of the table.
Part B
Complete the second column of the table.
Part C
Complete the third column of the table.
Part D
Complete the fourth column of the table.
Part E
Complete the fifth column of the table
The answer to the part A, B, C, D and E are as follows-
Part A: [tex][H3O+] [OH−] pOH[/tex] pH Acidic or Basic
1.0×10−8 1.0×10−6 6.00 8.00 basic
1.0×10−5 1.0×10−9 9.00 5.00 acidic
9.7×10−9 1.0×10−5 5.00 8.99 basic
[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]
Part B:
[tex][H3O+] [OH−] pOH[/tex] pH Acidic or Basic
1.0×10−8 1.0×10−6 6.00 8.00 basic
1.0×10−5 1.0×10−9 9.00 5.00 acidic
9.7×10−9 1.0×10−5 5.00 8.99 basic
[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]
Part C:
[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic
1.0×10−8 1.0×10−6 6.00 8.00 basic
1.0×10−5 1.0×10−9 9.00 5.00 acidic
9.7×10−9 1.0×10−5 5.00 8.99 basic
[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]
Part D:
[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic
1.0×10−8 1.0×10−6 6.00 8.00 basic
1.0×10−5 1.0×10−9 9.00 5.00 acidic
9.7×10−9 1.0×10−5 5.00 8.99 basic
[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]
Part E:
[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic
1.0×10−8 1.0×10−6 6.00 8.00 basic
1.0×10−5 1.0×10−9 9.00 5.00 acidic
9.7×10−9 1.0×10−5 5.00 8.99 basic
[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]
To know more about acidic refer to-
https://brainly.com/question/14072179
#SPJ11
One isotope of element J has an atomic mass of 78. 92u and a relative abundance of 50. 69%. The other major isotope of element J has an atomic mass of 80. 92u and a relative abundance of 49. 31%. Calculate the average atomic mass element J
The average atomic mass of element J is 79.854u as it determines the properties and behavior of the element in various chemical and physical processes.
To calculate the average atomic mass of element J, we need to use the formula:
Average atomic mass = (mass₁ × % abundance₁ + mass₂ x % abundance₂) ÷ 100
where mass₁ and mass₂ are the atomic masses of the two isotopes and % abundance₁ and % abundance₂ are their respective relative abundances.
Substituting the values given in the problem, we get:
Average atomic mass of J = (78.92u x 50.69% + 80.92u x 49.31%) ÷ 100
= (40.05148u + 39.80252u) ÷ 100
= 79.854u
To learn more about atomic follow the link:
brainly.com/question/5661976
#SPJ4
4
A local pet store expands and begins selling exotic organisms. The exotic organisms are
easy to care for when they are younger, but become very difficult to control as they get
older. The owners often decide to release their new pets into the local environment
rather than continue to care for them. The released animals do not have any natural
enemies and their population expands unchecked. How will this affect the biodiversity of
the ecosystem?
F
It introduces an invasive species, which will increase the biodiversity of the
ecosystem.
It introduces an invasive species, which will decrease the biodiversity of the
G
ecosystem.
H It introduces a native species which will not affect the biodiversity of the ecosystem.
It reintroduces a native species, which will decrease the biodiversity of the
ecosystem.
The scenario described in the question is an example of the negative impact that can result from introducing exotic organisms into an ecosystem.
Exotic organisms, also known as invasive species, are non-native species that are introduced to an ecosystem and can outcompete native species, disrupt natural ecological processes, and cause harm to the environment and economy.
When the exotic organisms are released into the local environment, they have no natural predators, and their population can increase unchecked, causing a decrease in biodiversity.
This is because the invasive species may outcompete and displace native species, reduce the availability of resources, and alter the habitat. The result is a homogenization of the ecosystem, where there are fewer different types of species and less overall diversity.
In summary, introducing exotic organisms can have a negative impact on biodiversity in an ecosystem, which can have cascading effects on the health and stability of the ecosystem. It is important to carefully manage and monitor the introduction of exotic organisms to prevent these negative impacts.
To know more about exotic organisms into an ecosystem refer here
https://brainly.com/question/1399436#
#SPJ11
