A container is filled with helium and nitrogen gas. A hole is poked into the container and the gases are


allowed to effuse. (A) Which gas would effuse faster? (B) Calculate the rate of effusion of helium to


nitrogen gas. (C) If it takes nitrogen gas 22 sec to effuse, how long would it take the helium gas?

if the unknown solution is mixed with potassium carbonate, the reaction will proceed differently depending on whether the unknown solution is strontium nitrate or magnesium nitrate.

Mixing the unknown solution with potassium sulfate will not provide any useful information to identify whether the unknown solution is strontium nitrate or magnesium nitrate. This is because neither strontium nor magnesium sulfate has distinctive properties that allow them to be easily distinguished from one another.

However, When mixed with strontium nitrate, potassium carbonate will form a white precipitate of strontium carbonate, while no reaction will occur when mixed with magnesium nitrate. Therefore, the presence of a white precipitate after mixing with potassium carbonate indicates that the unknown solution is strontium nitrate.

In summary, to identify whether the unknown solution is strontium nitrate or magnesium nitrate, the solution should be mixed with potassium carbonate. If a white precipitate forms, the solution is strontium nitrate. If no reaction occurs, the solution is magnesium nitrate. Mixing the unknown solution with potassium sulfate will not provide any useful information.

For more such questions on magnesium, click on:

https://brainly.com/question/30333465

#SPJ11

The number of moles of undissolved NaCl in the solution is 0.22 mol.

The number of moles of undissolved salt is calculated as;

mass of NaCl dissolved = volume of solution x solubility

volume = 100 cm³ = 100/1000 dm³ = 0.1 dm³

mass of NaCl dissolved = 0.1 dm³ x 9 mol/dm³

mass of NaCl dissolved = 0.9 mol

So, 0.9 moles of NaCl dissolved in the solution.

moles of undissolved NaCl = total moles of NaCl - moles of dissolved NaCl

molar mass of NaCl = 23 g/mol + 35.5 g/mol  = 58.5 g/mol

total moles of NaCl = 65.52 g / 58.5 g/mol = 1.12 mol

moles of undissolved NaCl = 1.12 mol - 0.9 mol

moles of undissolved NaCl = 0.22 mol

Learn more about number of moles here: https://brainly.com/question/14357742

#SPJ1

The addition of HBr to 2-methyl-2-butene is an example of an electrophilic addition reaction. The correct answer is (2)

The double bond in 2-methyl-2-butene is attacked by the electrophilic H+ ion from HBr, leading to the formation of a carbocation intermediate. The bromide ion (Br-) then attacks the carbocation, leading to the formation of a new carbon-bromine bond. The major organic product obtained from the addition reaction of HBr to 2-methyl-2-butene is 2-bromo-2-methylbutane, which is also known as t-butyl bromide. This is because the addition of HBr occurs at the tertiary carbon, leading to the formation of a tertiary carbocation intermediate, which is relatively stable. Therefore, the correct answer is (2) 2-bromo-2-methylbutane.

To know more about electrophilic addition reaction, here

brainly.com/question/16811879

#SPJ4

--The complete Question is, what is the major organic product from the addition reaction of hbr to 2-methyl-2-butene? group of answer choices

1. 2-bromopentane 2-bromo-2-methylbutane

2. 1-bromo-2-methylbutane

3. 1-bromo-3-methylbutane

4. 2-bromo-3-methylbutane=--

A forensic investigator relies on rigor mortis and livor mortis to determine the time of death, which respectively refers to the body stiffening and going through predictable stages and bluish-purple blotches appearing due to gravity causing the blood to flow downward after death.

A forensic investigator relies on two primary clues from a corpse to determine the time of death: rigor mortis and livor mortis. Rigor mortis refers to the process where the body stiffens after death, going through predictable stages that typically begin around two hours post-mortem. This occurs due to the lack of ATP in muscles, causing them to contract and become rigid. The stiffness progresses and peaks around 12 hours after death, then gradually subsides within the next 24-48 hours.

Livor mortis, on the other hand, is caused by gravity influencing the blood flow in the body after death. As the blood stops circulating, it flows downward and accumulates in the dependent areas, resulting in bluish-purple blotches appearing on the skin due to the lack of oxygen. This process usually starts around 30 minutes to 2 hours after death and becomes more pronounced within 6-12 hours.

By observing the extent and progression of rigor mortis and livor mortis, a forensic investigator can estimate the time of death, aiding in the investigation process.

Know more about rigor mortis here:

https://brainly.com/question/29194734

#SPJ11

The major organic product for the reaction between hydrogen chloride (HCl) and aluminum chloride [tex](AlCl_3)[/tex] is aluminum chloride  [tex](AlCl_3)[/tex].

When hydrogen chloride (HCl) reacts with aluminum chloride [tex](AlCl_3)[/tex], the reaction is exothermic and produces aluminum chloride  [tex](AlCl_3)[/tex] as the major product. Hydrogen chloride (HCl) is a strong acid that dissociates fully in water, releasing chloride ions (Cl-). Aluminum chloride  [tex](AlCl_3)[/tex] is a strong base that reacts with hydrogen chloride (HCl) to form aluminum hydroxide [tex](AlCl_3)[/tex] and hydrochloric acid (HCl). The ratio of starting material to reagent is one to one.

The balanced equation for the reaction between hydrogen chloride (HCl) and aluminum chloride  [tex](AlCl_3)[/tex] is:

HCl +  [tex](AlCl_3)[/tex]  → [tex]Al(OH)_3[/tex] + HCl

Therefore, the major organic product for this reaction is aluminum hydroxide  [tex]Al(OH)_3[/tex], which is an inorganic compound.  

Learn more about major product Visit: brainly.com/question/29666831

#SPJ4

The wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is 1.44 m.

Wavelength is a concept used in physics to describe the distance between two points of a wave. It is usually measured in meters or nanometers and is expressed as the inverse of the frequency of the wave. Wavelength is an important concept in fields such as electromagnetism, optics, and acoustics. It is used to describe the size of a wave, the frequency of a wave, and the speed at which a wave travels.

Wavelength (λ) is the distance between two successive crests of a wave. For a person running at a constant speed, the wavelength is determined by the speed of the person and the frequency of the wave.
Frequency (f) is the number of waves passing through a given point in a given time.
So, the wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is calculated as follows:
λ = (2.72 m/s) / (2 x 0.80 m) = 1.44 m
Therefore, the wavelength of a 66.8 kg person running at a speed of 2.72 m/s through an opening of width 0.80 m is 1.44 m.

To learn more about wavelength
https://brainly.com/question/29425795
#SPJ4

1. Using the "octet rule," I will write the Lewis structures for the following molecules:

(a) CH₂Cl₂: H-Cl:C-H
                       |
                       Cl
(b) NCl₃: Cl
              |
         Cl-N-Cl
(c) CS₂:  O=C=S=O
(d) CH₃CHCHCH₃: CH₃-CH-CH-CH₃

2. For the bolded carbon atom in the molecule CH₃CHCHCH₃:
a) There are 3 areas of high electron density surrounding the indicated C (3 bonded atoms and 0 lone pairs).
b) The AXmEn notation for the C in this molecule is AX₃E₀, where m=3 and n=0.
c) The molecular geometry for the C in this molecule is trigonal planar.
d) The bond angles surrounding C are approximately 120 degrees.

3. Obeying the octet rule, nitric acid (HNO₃) has two resonance structures. They can be drawn as:

Resonance Structure 1: O=N-O-H
                                       ||
                                       O

Resonance Structure 2: O-N=O
                                        ||
                                     O-H

Let us learn more in detail.

1.
(a) CH₂Cl₂: Carbon is the central atom with two hydrogen atoms and two chlorine atoms attached. The Lewis structure would be:

Cl   H
|     |
C-H-C-Cl
|     |
H    Cl

(b) NCl₃: Nitrogen is the central atom with three chlorine atoms attached. The Lewis structure would be:

 Cl
 |
Cl-N-Cl
 |
 Cl

(c) CS₂: Carbon is the central atom with two sulfur atoms attached. The Lewis structure would be:
S=C=S

(d) CH₃CHCHCH₃: Carbon is the central atom with three methyl groups and one hydrogen atom attached. The Lewis structure would be:

H   H   H
|   |   |
H-C-C-C-H
|   |   |
H   H   CH₃


3. The two resonance structures for nitric acid HNO₃ would be:

     O-H       O
      |         |
H-O=N         O=N-O
      |         |
     O          O-H

Learn more about the octet rule at https://brainly.com/question/865531

#SPJ11

H2O⋅⋅⋅⋅⋅⋅H−CH3 shows intermolecular attraction between water molecules and methane molecules, but not a hydrogen bond specifically.

A hydrogen bond is a type of intermolecular attraction that occurs when a hydrogen atom is bonded to an electronegative atom such as nitrogen, oxygen, or fluorine, and it is attracted to another electronegative atom in a nearby molecule. This attraction is represented by a dotted line.

Looking at the choices provided, the only option that shows a hydrogen bond is H3N⋅⋅⋅⋅⋅⋅H−O−H. In this molecule, the hydrogen atom in the H−O−H group is bonded to the highly electronegative oxygen atom, and it forms a hydrogen bond with the lone pair of electrons on the nitrogen atom in the H3N group.

The dotted line between the H and N represents the hydrogen bond.

In contrast, the other options do not show a hydrogen bond. H−H represents a simple covalent bond between two hydrogen atoms, while H4C⋅⋅⋅⋅⋅⋅H−F represents a covalent bond between a carbon atom and a fluorine atom, with no electronegative atoms capable of forming a hydrogen bond. H2O⋅⋅⋅⋅⋅⋅H−CH3 shows intermolecular attraction between water molecules and methane molecules, but not a hydrogen bond specifically.

To know more about intermolecular attraction, visit:

https://brainly.com/question/10626096#

#SPJ11

Dialcohol and diacid are bifunctional molecules that can be used in the synthesis of polyesters. In a polyester, the dialcohol and diacid react to form an ester bond, resulting in a long chain polymer.

Diesters can also be used in the synthesis of polyesters, as they can be hydrolyzed to form two carboxylic acid groups and two alcohol groups, which can then react to form an ester bond. Therefore, diesters are also a material used in the synthesis of polyesters.

Diamines and diacids can react to form nylon, so they are bifunctional molecules used in the synthesis of nylons. The reaction between a diamine and diacid forms an amide bond, which leads to a long-chain polymer.

Dinitro and diether are bifunctional molecules that are neither used in the synthesis of polyesters nor nylons. Dinitro compounds typically have nitro groups attached to each of the functional groups, making them more reactive and often used as explosives.

Diethers, on the other hand, can be used in organic synthesis as protecting groups for alcohols or carbonyl groups, but they do not have a direct role in the synthesis of polyesters or nylons.

To know more about Dialcohol refer to-

https://brainly.com/question/31540667

#SPJ11

The traits in lobsters are determined by their genetic makeup and environmental factors.

Natural selection can play a role in changing traits over time.

Genetic factors include inherited traits from their parents such as color, size, and shell density. Environmental factors such as water temperature, salinity, and availability of food can also impact these traits.

For example, lobsters in warmer water tend to grow faster and larger than those in cooler water. Changes in habitat or pollution can also impact the availability of food and water quality, leading to changes in growth rates and physical traits.

Lobsters with advantageous traits, such as stronger shells or better camouflage, are more likely to survive and pass on their genes to the next generation. Over time, these beneficial traits may become more common in the population.

Find out more on lobsters here: https://brainly.com/question/31023189

#SPJ1

Out of the options provided, cooler temperatures allow CO2 to remain in solution the longest.

When a soft drink is opened, CO2 molecules start to escape from the solution and accumulate in the headspace of the container. Higher temperatures increase the kinetic energy of the CO2 molecules, causing them to move faster and escape the solution more quickly. In contrast, cooler temperatures reduce the kinetic energy of the CO2 molecules, slowing down their movement and allowing them to remain in solution for a longer period of time.

Reduced air pressure, exposure to direct sunlight, and increased air currents can all further accelerate the loss of carbonation in an open soft drink. Reduced air pressure lowers the atmospheric pressure, which decreases the solubility of CO2 in the liquid. Exposure to direct sunlight increases the temperature of the drink and causes the CO2 molecules to escape more quickly. Increased air currents can also cause CO2 to escape more quickly by creating turbulence in the liquid.

Therefore, to keep a soft drink fizzy for longer, it is best to store it in a cool place and avoid exposing it to direct sunlight, reducing air pressure or increased air currents.

Know more about Kinetic Energy here:

https://brainly.com/question/26472013

#SPJ11

Enter your numerical answer with the correct number of significant figures: 5.24 moles.

Moles are small mammals that are known for their distinctive black or brown fur and their burrowing habits. They belong to the family Talpidae and are found in many parts of the world including North America, Europe, and some parts of Asia. Moles have small eyes and ears, short legs, and a long, cylindrical body. They typically measure around 3 to 5 inches in length and weigh around 1 to 4 ounces. They feed mostly on earthworms and other small invertebrates, and their diet is supplemented by insects, eggs, and other small animals. Moles have specialized claws and feet which allow them to dig quickly and efficiently.

To learn more about moles

https://brainly.com/question/15356425

#SPJ4

The molecular mass of the unknown acid is 100 g/mol.

To find the molecular mass, first determine the moles of acid present. Since 50.0 mL of 0.25 M NaOH is required for neutralization, calculate the moles of NaOH using the formula: moles = Molarity × Volume (in L).

Moles of NaOH = 0.25 mol/L × (50.0 mL × 0.001 L/mL) = 0.0125 mol

Since the acid donates one proton per molecule, the moles of acid present equal the moles of NaOH: 0.0125 mol.

Next, find the mass of one mole of the unknown acid. You have 1.0 g of the acid, so divide the mass by the moles to get the molecular mass:

Molecular mass = Mass / Moles = 1.0 g / 0.0125 mol = 100 g/mol

To know more about molecular mass click on below link:

https://brainly.com/question/31476184#

#SPJ11

The words listed under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew" would be: Rhinoceros, Hare, Onions, Water, Broth, Salt, Pepper, and Hair.

Under the subheading "Ingredients" for the recipe "Old Hunting Recipe for Rhinoceros Stew," the following words would be listed:

Hair (Note: this is an unusual ingredient and may be questioned as to its necessity in the recipe)

Learn more about Ingredients here: https://brainly.com/question/28000963

#SPJ1

You will need to observe each tube carefully and record your observations. Look at the color and consistency of the contents and note any unusual smells or other characteristics.

Smells are the odors that people detect when certain molecules enter their noses. Smells can be pleasant, such as the aroma of a freshly baked pie, or unpleasant, such as the odor of garbage. Humans can detect millions of different smells and each smell has its own unique molecular composition. Smells can be used to identify a particular item or to trigger a memory. People can even use smells to detect potential danger, such as the smell of smoke indicating a fire. Some animals, such as dogs, have a much more acute sense of smell than humans, and can be trained to detect certain smells, such as explosives or drugs. Smells are a powerful and often overlooked sense that can be used to enhance experiences or warn of potential danger.

To learn more about smells

https://brainly.com/question/26266398

#SPJ4

All of these elements are in the same period, we can focus on the groups. As we move from left to right, the atomic radius decreases. Therefore, lithium (Li) would have the largest atomic radius among the elements you listed.

To know which of these elements has the largest atomic radius: lithium (Li), beryllium (Be), boron (B), carbon (C), nitrogen (N), oxygen (O), fluorine (F), and neon (Ne).

The largest atomic radius can be determined by examining the elements in the periodic table. Atomic radius generally decreases across a period (from left to right) and increases down a group (top to bottom).

Considering the elements you provided:
- Li (lithium) is in Group 1 and Period 2
- Be (beryllium) is in Group 2 and Period 2
- B (boron) is in Group 13 and Period 2
- C (carbon) is in Group 14 and Period 2
- N (nitrogen) is in Group 15 and Period 2
- O (oxygen) is in Group 16 and Period 2
- F (fluorine) is in Group 17 and Period 2
- Ne (neon) is in Group 18 and Period 2

Since all of these elements are in the same period, we can focus on the groups. As we move from left to right, the atomic radius decreases. Therefore, lithium (Li) would have the largest atomic radius among the elements you listed.

To know more about atomic radius ;

https://brainly.com/question/28722010

#SPJ11

The pulse rate of blackworms collected from an environment with an acidic pH would be increased to minimize the effects of acidosis.

Acidosis occurs when there is an excess of acid in the body, which can lead to a decrease in blood pH. To compensate for this, the body increases pulse rate to improve blood circulation and oxygen delivery.

Blackworms are no exception to this mechanism and would experience an increase in pulse rate to counteract the acidic environment. It is important to note that the increase in pulse rate would not be enough to completely eliminate the effects of acidosis, but rather to minimize them.

To know more about pulse rate click on below link:

https://brainly.com/question/17744527#

#SPJ11

By observing whether a white precipitate forms or not, you can determine whether the unknown solution is strontium nitrate or magnesium nitrate.

When the unknown solution is mixed with potassium carbonate, one of two things can happen, depending on whether the unknown solution is strontium nitrate or magnesium nitrate.

If the unknown solution is strontium nitrate, then when mixed with potassium carbonate, a white precipitate of strontium carbonate will be formed. The balanced chemical equation for this reaction is:

Sr(NO3)2 + K2CO3 -> SrCO3 + 2KNO3

If the unknown solution is magnesium nitrate, then when mixed with potassium carbonate, no visible reaction will occur. Magnesium carbonate is insoluble in water and does not precipitate out. The balanced chemical equation for this reaction is:

Mg(NO3)2 + K2CO3 -> no visible reaction

Learn more about potassium carbonate here: https://brainly.com/question/29595625

#SPJ1

It is the compound that acts to fulfill the function of the said product.

the statement is true.

A chemical compound is  described as a chemical substance composed of many identical molecules containing atoms from more than one chemical A

A product may be made up of one or more compounds that work together to fulfill any desired  function.

The key difference between  a chemical compound and solution is that a compound contains two or more elements that are chemically bound together whereas a solution has few substances that do not chemically bound together as compounds do.

Learn more about chemical compounds at :

https://brainly.com/question/26556885

#SPJ1

The pressure of the gas is 76.8 atm.

The pressure of the gas can be calculated using the ideal gas law formula:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to calculate the number of moles of sulfur:

molar mass of sulfur = 32 g/mol

number of moles = mass/molar mass

= 640 g/32 g/mol

= 20 mol

Next, we need to convert the volume from milliliters to liters and the temperature from Celsius to Kelvin:

V = 540 ml = 0.54 L

T = 47°C + 273.15 = 320.15 K

Finally, we can plug in the values and solve for pressure

P = nRT/V

= 20 mol x 0.08206 L atm mol⁻¹ K⁻¹ x 320.15 K / 0.54 L

= 76.8 atm

To know more about ideal gas law, refer here:

https://brainly.com/question/28257995#

#SPJ11

Problems with understanding what happens when things burn can be attributed to various factors, such as lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy.

When things burn, a chemical reaction called combustion takes place. During this process, a fuel reacts with oxygen, resulting in the release of energy in the form of heat and light. The products of combustion are usually water, carbon dioxide, and sometimes other gases or particles, depending on the fuel and the burning conditions.

One issue in understanding this process is grasping the importance of oxygen. Oxygen is required for combustion to occur, and the presence of more or less oxygen affects the burning process. For example, in a well-ventilated area, the combustion is more efficient, whereas limited oxygen can result in incomplete combustion and the production of harmful byproducts like carbon monoxide.

Another problem in understanding combustion is the role of heat. Heat is both a product of and a catalyst for combustion. As a fuel gets heated, it may reach its ignition temperature, at which point it spontaneously ignites. Heat also contributes to the spread of fire, as it can cause nearby objects to reach their ignition temperature.

The production of light during combustion is another aspect that can cause confusion. The light emitted during burning is a result of excited atoms and molecules in the flame that release energy in the form of light when they return to their original state. This is what makes flames visible and gives them their characteristic colors.

In summary, problems with understanding what happens when things burn stem from a lack of knowledge about the combustion process, the role of oxygen, and the production of heat and light energy. Gaining a deeper understanding of these factors can help individuals better comprehend the complex nature of combustion and fire safety.

To know more about things burn refer here

brainly.com/question/29886555#

#SPJ11

The molarity of the potassium hydroxide solution is 2.0 M.

We know that, Molarity (M) = moles of solute (mol) / volume of solution (L)

We have 0.0400 mol of KOH dissolved in 20.0 mL of water.

Volume of the solution= 20.0 mL = 20.0 / 1000 = 0.0200 L

Therefore, molarity = (0.0400 mol) / (0.0200 L) = 2.0 M

So, the molarity of the potassium hydroxide solution is 2.0 M.

Thus, option 3 is the correct answer.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

The hydroxide concentration of the LiOH solution is 0.000016 M.

We know that:

pOH = -log[OH-]

We can rearrange this equation to solve for [OH-]:

[OH-] = 10^(-pOH)

Substituting the given pOH value of 4.80, we get:

[OH-] = 10^(-4.80)

[OH-] = 1.58 × 10^(-5)

Rounding to two decimal places, the hydroxide concentration of the LiOH solution is:

[OH-] = 0.000016 (rounded to two decimal places)

Therefore, the hydroxide concentration of the LiOH solution is 0.000016 M.

To know more about hydroxide concentration refer here:

https://brainly.com/question/29286376

#SPJ11

The equilibrium constant, K, for the reaction H2(g) + I2(g) ⇄ 2HI(g) can be calculated using the expression K= [HI]2/([H2][I2]). Since the concentrations of H2, I2, and HI are given in the question, we can calculate the equilibrium constant, K, for the reaction.

K = [HI]2/([H2][I2]) = (1.77 × 10-2)2/((1.83 × 10-3)(3.13 × 10-3)) = 4.43 × 104. Therefore, the equilibrium constant, K, for the reaction H2(g) + I2(g) ⇄ 2HI(g) at 425°C is 4.43 × 104.

Using the specified concentrations of H2, I2, and HI, it appears that you have correctly calculated the equilibrium constant, K, for the reaction H2(g) + I2(g) 2HI(g) at 425°C. The ratio of the concentrations of the reactants and products at equilibrium, K, is represented by each concentration being raised to the power of its stoichiometric coefficient.

The concentration of the product, HI, is preferred above the concentrations of the reactants, H2 and I2, at equilibrium, as shown by the value of K = 4.43 104 in this instance. This suggests that at equilibrium, the forward reaction—the creation of HI—is preferred.

It is significant to remember that the equilibrium constant, K, is temperature-dependent, and that temperature changes affect K's value.

Learn more about  equilibrium  at:

https://brainly.com/question/30694482

#SPJ1

If you have 16 moles of O2 in a balloon at 25°C and 1 atm, the volume of oxygen in the balloon is 390.5 liters.

The volume of oxygen in a balloon containing 16 moles of O2 depends on the temperature and pressure of the gas. To find the volume, we can use the ideal gas law equation PV = nRT, where P is the pressure of the gas, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Assuming the temperature and pressure are constant, we can rearrange the equation to solve for volume: V = nRT/P. The value of R is 0.0821 L·atm/mol·K.

Let's assume that the temperature is 25°C, or 298 K, and the pressure is 1 atm. Plugging in the values, we get:

V = (16 mol)(0.0821 L·atm/mol·K)(298 K)/(1 atm)

V = 390.5 L

Therefore, if you have 16 moles of O2 in a balloon at 25°C and 1 atm, the volume of oxygen in the balloon is 390.5 liters.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

To find the molar mass of the unknown gas, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas. The ideal gas law is given by:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in kelvins.

We can rearrange this equation to solve for the number of moles:

n = PV / RT

We can then use the number of moles and the mass of the gas to find the molar mass:

M = m / n

where M is the molar mass, m is the mass of the gas, and n is the number of moles.

Plugging in the given values, we have:

P = 1.00 atm

V = 20.0 L

T = 273 K

m = 205 g

R = 0.0821 L·atm/(mol·K)

First, we need to calculate the number of moles of the gas:

n = PV / RT

n = (1.00 atm) x (20.0 L) / (0.0821 L·atm/(mol·K) x 273 K)

n = 0.911 mol

Next, we can use the number of moles and the mass of the gas to calculate the molar mass:

M = m / n

M = 205 g / 0.911 mol

M = 224.8 g/mol

Therefore, the molar mass of the unknown gas is approximately 224.8 g/mol.

To know more about temperature refer here

https://brainly.com/question/7510619#

#SPJ11

Answer:

Temperature

Agitation

Particle size

Explanation:

The electron-transfer method is a way to balance chemical reactions by assigning oxidation numbers to each element and then transferring electrons between the two sides of the equation until the number of electrons is equal on both sides.

In this case, the reactants are solid copper and dilute nitric acid, which will produce copper(II) nitrate, water, and nitrogen monoxide gas (NO).

The first step is to assign oxidation numbers to the elements. For copper, the oxidation number is 0, for nitrogen it is +3, for oxygen it is -2, and for hydrogen it is +1.

The next step is to transfer electrons between the two sides of the equation so that the number of electrons on each side is equal. In this case, we can transfer two electrons from the reactant side to the product side. This will result in the equation being balanced, with the copper being reduced to 0 and the nitrogen being oxidized to +5.

The balanced equation would look like this:

Cu + 4HNO3 → Cu(NO3)2 + 2H2O + 2NO

The electron-transfer method is a simple, effective way to balance chemical equations.

By assigning oxidation numbers and transferring electrons between the reactants and products, we can ensure that the equation is balanced and all atoms are conserved.

Know more about Nitric acid here

https://brainly.com/question/29769012#

#SPJ11

A neutral atom of the element with 15 electrons is phosphorus with a ground state electron configuration of 1s2 2s2 2p6 3s2 3p3. It is classified as a nonmetal element in group 15. The atoms of this element are diamagnetic, as all electrons are paired up in their orbitals.

A neutral atom is an atom that has an equal number of protons and electrons. In the case of this certain element with 15 electrons, its ground state electron configuration would be 1s2 2s2 2p6 3s2 3p3.

This means that the first shell (n=1) has 2 electrons, the second shell (n=2) has 8 electrons, and the third shell (n=3) has 5 electrons.

Based on its position in the periodic table and the number of valence electrons it has, the element with this electron configuration is phosphorus. Phosphorus is a nonmetal element that belongs to group 15, also known as the nitrogen group.

To determine whether the atoms of this element are diamagnetic or paramagnetic, we need to look at its electron configuration. In this case, we can see that all the electrons are paired up in their respective orbitals, meaning there are no unpaired electrons.

This makes the element diamagnetic, which means it does not have a magnetic field of its own and will not be attracted to a magnetic field.

In summary, a neutral atom of the element with 15 electrons is phosphorus with a ground state electron configuration of 1s2 2s2 2p6 3s2 3p3. It is classified as a nonmetal element in group 15. The atoms of this element are diamagnetic, as all electrons are paired up in their orbitals.

To know more about neutral atom, visit:

https://brainly.com/question/29757010#

#SPJ11

The total entropy change of the steam during this process is 24.885 kJ/K.

During this process, the system undergoes a phase change from a saturated liquid-vapor mixture to a saturated vapor. The initial state can be determined using a steam table, which shows that at 225 kPa, the saturation temperature of water is 120.23°C. Therefore, the initial state is a mixture of liquid water and steam at 120.23°C with 80% of the mass in the liquid phase.

When the electric resistance heater vaporizes all of the liquid, the system transitions to a state of saturated vapor at the same pressure of 225 kPa and temperature of 120.23°C. The total entropy change of the steam during this process can be calculated using the formula:

ΔS = m * s_final - m * s_initial

where ΔS is the total entropy change, m is the mass of the steam, s_final is the specific entropy of the final state, and s_initial is the specific entropy of the initial state.

At the initial state, using the steam table, the specific entropy of the saturated liquid-vapor mixture can be found to be 1.5875 kJ/kg-K. At the final state, the specific entropy of the saturated vapor can also be found to be 7.2925 kJ/kg-K.

Therefore, the total entropy change of the steam is:

ΔS = 4.2 kg * (7.2925 kJ/kg-K - 1.5875 kJ/kg-K)
ΔS = 24.885 kJ/K

Therefore, the total entropy change of the steam during this process is 24.885 kJ/K.

Know more about Total entropy change here:

https://brainly.com/question/30691597

#SPJ11