A wall consists of wood with a thickness of 2.0 cm. Wood has thermal conductivity λ1 = 0.14W / Km.The U-value of the wall is 7 W/(Km^2).1400 watts of power would disappear from the wall with an area of 20 m² and a temperature difference of 10°C.
To calculate the U-value of the wall, we need to use the formula:
U-value = 1 / (total thermal resistance)
The total thermal resistance can be calculated as the sum of the thermal resistances of each layer of the wall.
In this case, we have a single layer of wood with a thickness of 2.0 cm and a thermal conductivity of λ1 = 0.14 W/Km.
The thermal resistance (R-value) of a material can be calculated using the formula:
R-value = thickness / thermal conductivity
Given values:
Thickness of wood (t) = 2.0 cm = 0.02 m
Thermal conductivity of wood (λ1) = 0.14 W/Km
Calculating the R-value for the wood layer:
R-value = 0.02 m / 0.14 W/Km
Now, we can calculate the U-value:
U-value = 1 / (R-value)
Calculating the U-value:
U-value = 1 / (0.02 m / 0.14 W/Km)
U-value = 0.14 W/Km / 0.02 m
U-value = 7 W/(Km^2)
The U-value represents the thermal transmittance of the wall, and a lower value indicates better insulation properties. In this case, the U-value of the wall is 7 W/(Km^2).
To calculate the amount of power (in watts) that disappears from such a wall with an area of 20 m², we can use the formula:
Power = U-value * Area * Temperature difference
Given values:
Area (A) = 20 m²
Temperature difference (ΔT) = Assumed value (e.g., the difference between indoor and outdoor temperatures)
Let's assume a temperature difference of 10°C.
Calculating the power:
Power = 7 W/(Km^2) * 20 m² * 10 K
Power = 1400 W
Therefore, 1400 watts of power would disappear from the wall with an area of 20 m² and a temperature difference of 10°C.
To learn more about conductivity visit: https://brainly.com/question/28869256
#SPJ11
calculate the molar mass of a gas at 78 c and 560 torr if 206 ng occupies 0.206 ul. round your answer to significant figures.
The molar mass of a gas at 78 c and 560 torr if 206 ng occupies 0.206 ul is 41.64 g/mol
The molar mass of a gas can be calculated using the ideal gas law equation and the given values of temperature, pressure, mass, and volume.
To calculate the molar mass of a gas, we can use the formula:
Molar mass = (mass of gas) / (number of moles of gas)
First, we need to determine the number of moles of gas. We can use the ideal gas law equation:
[tex]PV = nRT[/tex]
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
We are given the temperature as 78 °C, which needs to be converted to Kelvin by adding 273.15:
T = 78 + 273.15 = 351.15 K
The pressure is given as 560 torr, and the volume is given as 0.206 µl.
Next, we can calculate the number of moles using the ideal gas law equation:
[tex]n = (PV) / (RT)[/tex]
(0.5105 atm)(2.06×10⁻⁷ L) = n(0.0821 L-atm/mol-K)(318 K)
n = 4×10⁻⁹ mol
Molar mass = Mass/n = 2.06×10⁻⁷ g/4×10⁻⁹ mol
Molar mass = 41.64 g/mol
Now that we have the number of moles, we can calculate the molar mass by dividing the mass of the gas (given as 206 ng) by the number of moles.
Learn more about molar mass here
https://brainly.com/question/31480708
#SPJ11
a tsaionary radar gun can determine the speed of a pitched baseball by measurinfg the difference in frequency between in cident and refelcted radar waves. this process illustrates
The process in which a stationary radar gun can determine the speed of a pitched baseball by measuring the difference in frequency between incident and reflected radar waves is called the Doppler effect.
It is a phenomenon that occurs when the source of a wave is in motion, which results in a shift in frequency of the wave as detected by an observer. A Doppler radar system consists of a transmitter that emits radio waves and a receiver that detects the waves reflected back to the radar after they strike an object.
When the waves bounce off an object, they experience a change in frequency due to the motion of the object relative to the radar. This change in frequency is directly proportional to the velocity of the object. By measuring this shift in frequency, the radar can determine the speed of the object.
This is how the stationary radar gun is able to determine the speed of a pitched baseball by measuring the difference in frequency between incident and reflected radar waves. Therefore, the process that illustrates this phenomenon is the Doppler effect.
Learn more about Doppler effect.
brainly.com/question/28106478
#SPJ11
A box of mass 58 kg is at rest on a smooth frictionless horizontal floor.Kent pushes the box with 84 N of force parallel to the floor to move the box across the smooth floor by a distance of 2.1 m.Then,the floor becomes rough,and Kent increases the magnitude of the force he applies on the box as soon as the floor becomes rough. When the box is pushed by a distance of 5.0 m on the rough floor.the speed of the box is 2.8 m/s.The magnitude of the frictional force between the box and the rough floor is 110N. a) What is the work done on the box by Kent when the box is pushed on the smooth floor by the distance of 2.1 m?2 pt) b) What is the kinetic energy of the box when the box is pushed on the smooth floor by the distance of 2.1 m?2 pt) (c What is the work done on the box by the frictional force when the box is pushed on the rough floor by the distance of 5.0m?(2.pt) d What is the work done on the box by Kent when the box is pushed on the rough floor by the distance of 5.0 m?(2 pt) e What is the magnitude of the force that Kent applies to the box during the time he pushes the box on the rough floor (2pt)
(a)The work done on the box by Kent when it is pushed on the smooth floor by a distance of 2.1 m is 176.4 J(b)the kinetic energy of the box when it is pushed on the smooth floor by a distance of 2.1 m is 0 J.(c)The work done on the box by the frictional force when it is pushed on the rough floor by a distance of 5.0 m is -550 J.(d)the work done on the box by Kent when it is pushed on the rough floor by a distance of 5.0 m cannot be determined without knowing the force applied.
(a) The work done on the box by Kent when it is pushed on the smooth floor by a distance of 2.1 m can be calculated using the formula:
Work = Force * Distance * cos(θ)
Given:
Force (F) = 84 N
Distance (d) = 2.1 m
Angle between the force and displacement (θ) = 0° (since the force is parallel to the floor)
Work = 84 N * 2.1 m * cos(0°)
Work = 176.4 J
Therefore, the work done on the box by Kent when it is pushed on the smooth floor by a distance of 2.1 m is 176.4 J.
(b) The kinetic energy of the box when it is pushed on the smooth floor by a distance of 2.1 m can be calculated using the formula:
Kinetic Energy = (1/2) * Mass * Velocity^2
Given:
Mass (m) = 58 kg
Velocity (v) = unknown (since it is not provided)
Since the box is at rest on the smooth floor, its initial velocity is 0 m/s.
Kinetic Energy = (1/2) * 58 kg * (0 m/s)^2
Kinetic Energy = 0 J
Therefore, the kinetic energy of the box when it is pushed on the smooth floor by a distance of 2.1 m is 0 J.
(c) The work done on the box by the frictional force when it is pushed on the rough floor by a distance of 5.0 m can be calculated using the formula:
Work = Force * Distance * cos(θ)
Given:
Force (F) = 110 N (frictional force)
Distance (d) = 5.0 m
Angle between the force and displacement (θ) = 180° (since the force is opposite to the displacement)
Work = 110 N * 5.0 m * cos(180°)
Work = -550 J (negative sign indicates work done against the motion)
Therefore, the work done on the box by the frictional force when it is pushed on the rough floor by a distance of 5.0 m is -550 J.
(d) The work done on the box by Kent when it is pushed on the rough floor by a distance of 5.0 m can be calculated by adding the work done by the applied force and the work done against the frictional force:
Work = Work by applied force + Work against frictional force
Work by applied force = Force * Distance * cos(θ)
Given:
Force (F) = unknown (since it is not provided)
Distance (d) = 5.0 m
Angle between the force and displacement (θ) = 0° (since the force is parallel to the floor)
The work done by applied force can be calculated once the force is known.
Therefore, the work done on the box by Kent when it is pushed on the rough floor by a distance of 5.0 m cannot be determined without knowing the force applied.
To learn more about kinetic energy visit: https://brainly.com/question/8101588
#SPJ11
An electric field is produced by
a) constant magnetic field
b) changing the magnetic field
c) either a constant or changing magnetic field
d) none of the above
An electric field is produced by c) either a constant or changing magnetic field.
The electric field, which is a physical field that surrounds an electrically charged particle and exerts a force on other charged particles in the vicinity of it, is caused by the change in a magnetic field over time.
The electric field is known as a Faraday field when it is produced in this way. The Faraday field is the basis for the operation of all electrical equipment, including generators, motors, and transformers. An electrical field is created whenever an electric charge is present, according to Coulomb's Law, which states that like charges repel and opposite charges attract. Electric fields arise from the movement of charges, such as those found in a conductor that carries a current, or from changing magnetic fields, such as those found in an inductor or transformer that has an alternating current passing through it. The option c is correct.
To know more about Coulomb's Law visit:
https://brainly.com/question/506926
#SPJ11
A 25.5-9 object moving to the right at 22.0 cm/s overtakes and collides elastically with a 12.5-g object moving in the same direction at 150 cm/sed the city of each otject after the colour. (Take the positive direction to be to the right. Indicate the direction with the sign of your answer) 12.90 25.5-g object Your response offers from the correct answer by more than 10% Double check your calculations on/ 19.96 x 12.5-g object Your response differs from the correct answer by more than 10%. Double check your calculations ons Need Help?
The final velocities are:v1' = -12.90 m/s (to the left)v2' = 19.96 m/s.
When an object collides elastically with another object, the momentum and kinetic energy of the system are conserved. Let us determine the final velocities of each object using the conservation of momentum and kinetic energy. Conservation of momentum: Total momentum before collision = Total momentum after collision(m1v1 + m2v2)before = (m1v1 + m2v2)after Where m1 and m2 are the masses of the objects, v1 and v2 are the initial velocities, and v1' and v2' are the final velocities.
Let's substitute the given values and solve for v1' and v2'.(25.5 g)(0.220 m/s) + (12.5 g)(1.50 m/s) = (25.5 g)(v1') + (12.5 g)(v2') (1)Therefore, v2' = (25.5 g)(0.220 m/s) + (12.5 g)(1.50 m/s) - (25.5 g)(v1') / (12.5 g)Substitute the given values.(25.5 g)(0.220 m/s) + (12.5 g)(1.50 m/s) - (25.5 g)(v1') / (12.5 g) = 19.96 m/s
So, the final velocity of the 25.5 g object is 19.96 m/s to the right. The final velocity of the 12.5 g object is: (25.5 g)(0.220 m/s) + (12.5 g)(1.50 m/s) - (12.5 g)(19.96 m/s) / (25.5 g) Therefore, v1' = -12.90 m/s to the left.
So, the final velocities are:v1' = -12.90 m/s (to the left)v2' = 19.96 m/s (to the right)
Learn more about momentum:https://brainly.com/question/18798405
#SPJ11
Determine the maximum shear stress (in MPa, using 2 decimal places) for a beam with the following data:
1.Beam is 8 m in length (simply supported)
2.Has an applied uniform distributed load of 39 kN/m
3.Rectangular cross section rectangular with a base of 97 mm and a height of 235 mm
The maximum shear stress (in MPa, using 2 decimal places) for a beam with the given data is ≈ 319.69 MPa.
Given,
Length of beam (l) = 8 m
Uniformly distributed load (W) = 39 kN/m
Width of the rectangular cross-section (b) = 97 mm
Height of the rectangular cross-section (h) = 235 mm
Formula used,
Shear stress (τmax) = (3/2) * (V/A)
Where,V = Shear forceA = Area of cross-sectionArea of the cross-section,
A = b × h = (97 × 235) mm² = 22895 mm² = 0.022895 m²
Shear force, V = (W × l)/2 = (39 × 8) kN/2 = 156 kN = 156000 N
Shear stress (τmax) = (3/2) * (V/A) = (3/2) * (156000/0.022895) MPa ≈ 319.69 MPa
Therefore, the maximum shear stress (in MPa, using 2 decimal places) for a beam with the given data is ≈ 319.69 MPa.
learn more about shear stress here
https://brainly.com/question/30407832
#SPJ11
the evidence that an asteroid did hit earth at the kt boundary is strong. but did it cause extinction of the dinosaurs? what additional hypotheses are scientists investigating?
The evidence supporting the impact of an asteroid at the Cretaceous-Paleogene (K-Pg) boundary, also known as the KT boundary, is indeed strong.
The evidence supporting the impact of an asteroid at the Cretaceous-Paleogene (K-Pg) boundary, also known as the KT boundary, is indeed strong. The most notable piece of evidence is the discovery of a large impact crater called the Chicxulub crater in the Yucatan Peninsula of Mexico, dating back to approximately 66 million years ago. This impact event is believed to have had significant global consequences, including widespread environmental changes.
The extinction of the dinosaurs and many other species at the KT boundary is widely attributed to the asteroid impact. However, the exact mechanisms and the extent of the impact's role in the extinction event are still subjects of ongoing scientific investigation. While the asteroid impact is considered a major factor, other hypotheses and additional research areas are being explored to gain a comprehensive understanding of the extinction event. Some of these hypotheses include:
Climate Change: The asteroid impact is believed to have caused massive climate disturbances, including a period of global cooling due to the release of dust and aerosols into the atmosphere. However, the long-term effects on the climate and the subsequent impact on ecosystems and species survival are still under investigation.Volcanic Activity: Coinciding with the asteroid impact, there was significant volcanic activity in the Deccan Traps in modern-day India. Scientists are exploring the potential synergistic effects of the asteroid impact and volcanic eruptions in amplifying the environmental disruptions and contributing to the extinction event.Habitat Destruction: The combination of immediate and long-term effects of the asteroid impact, such as wildfires, tsunamis, and alteration of the global environment, likely caused widespread habitat destruction. Investigating the extent and duration of these changes is crucial to understanding their impact on ecosystems and species survival.Ecological Factors: Scientists are examining the ecological dynamics and species interactions during the Cretaceous period to better understand how different species responded to the environmental changes triggered by the asteroid impact. Factors such as competition, predation, and species resilience are being studied to gain insights into the extinction patterns.Recovery and Succession: Investigating the post-extinction recovery and the subsequent emergence of new species and ecosystems is also an area of interest. Understanding how life rebounded and diversified in the aftermath of the extinction event provides valuable insights into the long-term consequences of the asteroid impact.It's important to note that while the asteroid impact is considered a leading cause of the extinction event, other factors may have also played a role. Scientists continue to study and analyze various lines of evidence to refine our understanding of this significant event in Earth's history.
To know more about Cretaceous-Paleogene follow the link:
https://brainly.com/question/26572124
#SPJ4
Determine the magnetic field midway between two long straight wires 2.0 cm apart in terms of the current I in one when the other carries 25 A. Assume these currents are (a) in the same direction, and (b) in opposite directions. Two straight parallel wires are separated by 7.0 cm. There is a 2.0-A current flowing in the first wire. If the magnetic field strength is found to be zero between the two wires at a distance of 2.2 cm from the first wire, what is the magnitude and direction of the current in the second wire? Two long straight wires each carry a current I out of the page toward the viewer, Fig. 20-56. Indicate, with appropriate arrows, the direction of B Vector at each of the points 1 to 6 in the plane of the page. State if the field is zero at any of the points.
The magnetic field at the midpoint between the wires when the currents are in the same direction is 10⁻⁵ Tesla. b)The magnetic field at the midpoint is zero.
(a) When the currents in the two wires are in the same direction, the magnetic field at the midpoint between the wires can be calculated using the formula for the magnetic field produced by a straight wire. The formula for the magnetic field at a distance r from a long straight wire carrying current I is given by:
B = (μ₀ × I) / (2π × r)
Where B is the magnetic field, μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A), I is the current, and r is the distance from the wire.
In this case, the wires are 2.0 cm apart, so the distance from each wire to the midpoint is 1.0 cm = 0.01 m.
For wire 1 carrying a current of 25 A:
B₁ = (4π × 10⁻⁷ T·m/A × 25 A) / (2π × 0.01 m) = 10⁻⁵ T
(b) When the currents in the two wires are in opposite directions, the magnetic fields produced by each wire cancel each other out at the midpoint between the wires. Therefore, the magnetic field at the midpoint is zero.
To know more about magnetic field
https://brainly.com/question/14411049
#SPJ4
30mpa 20mpa 10mpa determine the principal stresses the maximum in plane shear and associated average normal stresses thetap1 theta p2 theta s
Principal stresses are a set of three mutually perpendicular normal stresses that act on a material at a specific point. Given: σ1 = 30MPa, σ2 = 20MPa, σ3 = 10MPa. The Principal Stresses are given by:σ1, σ2, σ3. In Plane, Shear Stress is given by:τmax = (σ1 - σ3)/2 = (30-10)/2 = 10 MPa. The average Normal Stress is given by:σavg = (σ1 + σ2 + σ3)/3 = (30+20+10)/3 = 20 MPa. The Lateral Stress is given by:σlat = -σavg = -20MPa.
Principal Angles (Counted anticlockwise from the x-axis) are given by: tan 2θp = (2τmax)/(σ1 - σ3) = 2(10)/(30-10) = 0.67θp1/2 = 0.5(tan^-1(θp)) = 0.5(tan^-1(0.67)) = 20.8° and 110.8°.
The Angle to the plane on which the maximum shear stress acts is given by:θs = 0.5(tan^-1(2τmax/(σ1-σ3))) = 0.5(tan^-1(2(10)/(30-10))) = 20.8°.
Therefore, the principal stresses are:σ1 = 30MPaσ2 = 20MPaσ3 = 10MPa.
The maximum in-plane shear is 10MPaThe associated average normal stresses are 20MPa.
The principal angles are θp1 = 20.8°, θp2 = 110.8°.
The angle to the plane on which the maximum shear stress acts is 20.8°.
Learn more about principal stresses here ;
https://brainly.com/question/30263693
#SPJ11
Given that, σ1 = 30MPa, σ2 = 20MPa, σ3 = 10MPa as stresses, the Principal Stresses are given by:σ1, σ2, σ3.Therefore, the principal stresses the maximum in plane are:σ1 = 30MPa σ2 = 20MPa σ3 = 10MPa.
Principal Stresses are a set of three mutually perpendicular normal stresses that act on a material at a specific point. In Plane, Shear Stress is given by:τmax = (σ1 - σ3)/2 = (30-10)/2 = 10 MPa. The average Normal Stress is given by:σavg = (σ1 + σ2 + σ3)/3 = (30+20+10)/3 = 20 MPa. The Lateral Stress is given by:σlat = -σavg = -20MPa.
Principal Angles (Counted anticlockwise from the x-axis) are given by: tan 2θp = (2τmax)/(σ1 - σ3) = 2(10)/(30-10) = 0.67θp1/2 = 0.5([tex]tan^{-1}[/tex](θp)) = 0.5([tex]tan^{-1}[/tex](0.67)) = 20.8° and 110.8°.
The Angle to the plane on which the maximum shear stress acts is given by:θs = 0.5([tex]tan^{-1}[/tex](2τmax/(σ1-σ3))) = 0.5([tex]tan^{-1}[/tex](2(10)/(30-10))) = 20.8°.
The maximum in-plane shear is 10MPa. The associated average normal stresses are 20MPa.
The principal angles are θp1 = 20.8°, θp2 = 110.8°.
The angle to the plane on which the maximum shear stress acts is 20.8°.
Learn more about shears here ;
https://brainly.com/question/30328948
#SPJ11
Rainbows are not usually seen as complete circles because
a.) the ground is usually in the way
b.) they have no bottom part
c.) rainbows are actually arched shaped
d.) they are actually elliptical
e.) rain drops are not perfectly round
Rainbows are not usually seen as complete circles because the ground is usually in the way and rainbows are actually arched shaped. Option a is correct answer.
The primary reason why rainbows are not usually seen as complete circles is that the ground obstructs the view. When we observe a rainbow, we see a portion of it above the horizon, forming an arc shape. The lower part of the rainbow, which would complete the circle, is hidden by the ground. Therefore, our perspective limits our ability to see the full circle of the rainbow.
Rainbows are created by the refraction, reflection, and dispersion of sunlight through water droplets in the atmosphere. The spherical shape of raindrops causes the light to be refracted and reflected at different angles, resulting in the formation of a circular arc of colors. However, due to the positioning of the observer on the ground, only a portion of the arc is visible, creating the familiar semi-circular shape of a rainbow.
Learn more about Rainbows here
https://brainly.com/question/15172132
#SPJ11
if Ø (z) = y +jx represents An the complex potential fo electric field and x = 1 + (x /(x + y)² - 2xy)+ (x+y)(x-y), deter mine the function Ø(z)?
The function Ø(z) is Ø(z) = y + j(2x² + 2xy - y²), where x = 2x² + 2xy - y²
= x (x + y)² - 2xy
= (x + y)² - y² + x(x - y)
= 2x² + 2xy - y²
We are given that Ø (z) = y +jx represents
An the complex potential for electric field and
x = 1 + (x /(x + y)² - 2xy)+ (x+y)(x-y).
To determine the function Ø(z), we need to find the value of x using the given expression.
Then, we can substitute the value of x in the given expression of Ø (z).
Let's simplify the expression of x: x = 1 + (x /(x + y)² - 2xy)+ (x+y)(x-y)x (x + y)² - 2xy x + y²
= (x + y)² - y² + (x+y)(x-y)x² + 2xy² + y²
= x² + 2xy + y² - y² + x² - y² + xy - xyx² + 3xy² - y²
= 2x² + 2xy - y²
Now, we can substitute the value of x in the given expression of Ø (z)Ø(z)
= y + jx
= y + j(2x² + 2xy - y²)
Therefore, the function Ø(z) is Ø(z) = y + j(2x² + 2xy - y²),
where x = 2x² + 2xy - y²
= x (x + y)² - 2xy
= (x + y)² - y² + x(x - y)
= 2x² + 2xy - y²
To learn more about function visit;
https://brainly.com/question/30721594
#SPJ11
a butterfly at eye level is 20 cm in front of a plane mirror. you are behind the butterfly, 50 cm from the mirror. what is the distance between your eye and the image of the butterfly in the mirror?
The distance between your eye and the image of the butterfly in the mirror is 70 cm.
To find the distance between your eye and the image of the butterfly in the mirror, The concept of virtual images formed by plane mirrors.
Given:
Distance of the butterfly from the mirror [tex]\rm ($d_{\text{butterfly}}$)[/tex] = 20 cm
Distance of you from the mirror [tex]\rm ($d_{\text{you}}$)[/tex] = 50 cm
Known, that the distance of the virtual image [tex]\rm ($d_{\text{image}}$)[/tex] formed by a plane mirror is the same as the distance of the object from the mirror:
[tex]\rm $d_{\text{image}} = d_{\text{butterfly}}$[/tex]
Calculate the distance between your eye and the image of the butterfly in the mirror:
[tex]\rm $d_{\text{eye-image}} = d_{\text{you}} + d_{\text{image}}$[/tex]
Substitute the given values:
[tex]\rm $d_{\text{eye-image}} = 50 \ \text{cm} + 20 \ \text{cm} \\= 70 \ \text{cm}$[/tex]
The distance between your eye and the image of the butterfly in the mirror is 70 cm.
Know more about virtual image:
https://brainly.com/question/13197137
#SPJ12
Subject: Physics - Meteorology
Draw and describe a cross section through a polar front depression,
on the poleward and equatorial side of the center showing fronts,
cloud and precipitation areas.
The cold front is the leading edge of the cold air mass. It is marked by a sharp change in temperature and a band of clouds and precipitation. See attached image.
What is the explanation for this ?The weather fronts play a significant role in determining weather patterns. The cold front represents the leading edge of a cold air mass,characterized by a sudden temperature change and associated with thunderstorms.
The warm front, on the other hand,marks the leading edge of a warm air mass, featuring a gradual temperature change and rain showers. When the cold front catches up to the warm front, an occluded front forms, resulting in a combination of thunderstorms and rain showers.
These fronts are influenced by the movement of winds, driven by differences in air density. Polar front depressions,common in mid-latitudes, bring precipitation and storms to these areas.
Learn more about precipitation at:
https://brainly.com/question/1783904
#SPJ1
- [-/1 Points] DETAILS SERCP11 24.4.OP.017. A teacher places a fluid substance, with a refractive index of 1.69, between two horizontal p (λ = 300 nm). What is the minimum thickness (in nm) that the
A teacher puts a fluid substance with refractive index of 1.69 between two horizontal plates. The minimum thickness the liquid layer has is 141.36 nm.
When light enters a medium, it gets refracted as its velocity is reduced. This change in velocity is due to the refractive index of the medium.
Formula for calculating minimum thickness is given as;
2t = mλ / nr
Where;
m is the order of the maxima,
λ is the wavelength,
n is the refractive index of the medium,
r is the radius of curvature of the plates,
t is the thickness of the medium
the refractive index of the medium is n = 1.69 and λ=300 nm
We want to find the minimum thickness of the liquid layer that is, t
Minimum thickness can be obtained when m=1
i.e., the first order minima is obtained.
Substituting the given values in the formula,
2t = 1(300 nm) / 1.69t = 141.36 nm
Therefore, the minimum thickness that the liquid layer must have is 141.36 nm.
Learn more about refractive index:
https://brainly.com/question/5170843
#SPJ11
An experiment is carried out with a monatomic gas to determine the specific heat of the gas. The result is cy =9.50×10-2 J/gK. Part A How many degrees of freedom does an atom in this gas have? TV-| �
An atom in the monatomic gas has three degrees of freedom. In the case of a monatomic gas, with no mention of any phase transitions or additional complexities, the number of degrees of freedom is equal to three.
In classical thermodynamics, the number of degrees of freedom for a monatomic gas can be determined using the equipartition theorem. According to this theorem, each degree of freedom contributes (1/2)kT to the total energy of the gas, where k is the Boltzmann constant and T is the temperature.
For a monatomic gas, the atoms are considered as point masses that can move freely in three-dimensional space. Each atom can move independently along the three orthogonal axes (x, y, and z), giving rise to three translational degrees of freedom. There are no rotational or vibrational degrees of freedom since monatomic gases do not have internal rotations or molecular vibrations.
Therefore, the total energy of the gas can be expressed as:
E = (1/2)kT * f
Where E is the total energy, k is the Boltzmann constant, T is the temperature, and f is the number of degrees of freedom.
Given that the specific heat (cy) is 9.50×10^(-2) J/gK, we can use the relation:
cy = (1/m) * (dQ/dT)
Where cy is the specific heat, m is the mass, dQ is the change in heat, and dT is the change in temperature.
Since the mass is not specified in the question, we can assume a unit mass (m = 1 g). Therefore, the specific heat becomes:
cy = dQ/dT
Since the specific heat is given in J/gK, we can directly relate it to the change in energy (dQ) and the change in temperature (dT) for a 1 g sample of the gas.
By comparing the equation cy = (1/m) * (dQ/dT) with the equation E = (1/2)kT * f, we can see that the specific heat (cy) directly relates to the total energy change (dQ) and the number of degrees of freedom (f). In the case of a monatomic gas, with no mention of any phase transitions or additional complexities, the number of degrees of freedom is equal to three.
To know more about atom ,visit:
https://brainly.com/question/621740
#SPJ11
1. The sign of acceleration vector always agrees with the sign of A) the displacement vector the velocity vector C) change in the velocity vector D) speeding up direction 2. Which velocity-versus-time
The sign of the acceleration vector always agrees with the sign of D) the speeding up direction, while a velocity-versus-time graph can provide valuable information about an object's motion, including its acceleration and displacement.
Acceleration is a vector quantity that represents the rate of change of velocity with respect to time. It indicates how an object's velocity is changing. When an object is speeding up, its velocity is increasing, and the acceleration vector is directed in the same direction as the velocity vector. Therefore, the sign of the acceleration vector agrees with the sign of the speeding up direction.
The velocity-versus-time graph is commonly represented as a line or curve on a coordinate plane where the horizontal axis represents time (t) and the vertical axis represents velocity (v).
In a velocity-versus-time graph, the slope of the line or curve represents the acceleration of the object. A horizontal line indicates constant velocity since the slope is zero, which implies no acceleration. A positive slope indicates positive acceleration, which means the object is speeding up. A negative slope indicates negative acceleration or deceleration, which means the object is slowing down.
The shape of the graph and its characteristics can provide information about the object's motion. For example, a straight line with a positive slope represents uniform acceleration, while a curved line indicates non-uniform acceleration. The area under the curve represents the displacement of the object over a specific time interval.
The sign of the acceleration vector agrees with the sign of the speeding up direction, while a velocity-versus-time graph can provide valuable information about an object's motion, including its acceleration and displacement.
To know more about Acceleration, visit
brainly.com/question/460763
#SPJ11
Not only could you prove the answer but also an explanation, please? I'm having a little trouble understanding the concept of acceleration when changing direction/speed is involved. (1) Two ice gliders (essentially large sleds with sails) are sliding on a frozen lake. Glider A goes from traveling NW at 28 m/s to traveling SE at 12 m/s in 4 seconds while glider B goes from 15 m/s SE to 39 m/s SE in 6 seconds. For these intervals will the acceleration of glider A be (a) greater than, (b) less than (c) equal to, or (d) indeterminate compared to glider B? Explain.
The acceleration of glider A will be greater than the acceleration of glider B during the specified intervals.
Acceleration is a measure of how quickly an object's velocity changes over time. It is calculated by dividing the change in velocity by the time taken. In the given scenario, glider A undergoes a larger change in velocity compared to glider B in the same time interval. Glider A goes from 28 m/s NW to 12 m/s SE, which involves a change in both direction and speed. This change in velocity is significant and occurs in 4 seconds.
On the other hand, glider B goes from 15 m/s SE to 39 m/s SE, which involves only a change in speed and occurs in 6 seconds. The change in velocity for glider A is more substantial, resulting in a higher acceleration compared to glider B.
In summary, glider A has a greater acceleration than glider B because it undergoes a larger change in velocity (both in direction and speed) in a shorter time interval.
learn more about "acceleration ":- https://brainly.com/question/25876659
#SPJ11
You have a resistor 200 ohm, a 0.400-H inductor, a 5.00 uF capacitor, and a variable frequency ac source with an amplitude of 3.00 V. You connect all four elements together to form a series circuit. What will be the current amplitude at an angular frequency of 400rad/s? At this frequency, will the source voltage lead or lag the current?
The current amplitude in the series circuit at an angular frequency of 400 rad/s will be approximately 1.20 mA. At this frequency, the source voltage will lead the current.
The current amplitude can be calculated using the impedance formula for a series RLC circuit. The impedance (Z) of the circuit is given by:
[tex]\[ Z = \sqrt{R^2 + (X_L - X_C)^2} \][/tex]
where R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance. The inductive reactance (XL) and capacitive reactance (XC) can be calculated using the formulas:
[tex]\[ X_L = \omega L \][/tex]
[tex]\[ X_C = \frac{1}{\omega C} \][/tex]
where ω is the angular frequency, L is the inductance, and C is the capacitance. Plugging in the given values, we get:
[tex]\[ X_L = (400 \, \text{rad/s}) \times (0.400 \, \text{H}) = 160 \, \Omega \][/tex]
[tex]\[ X_C = \frac{1}{(400 \, \text{rad/s}) \times (5.00 \times 10^{-6} \, \text{F})} = 5000 \, \Omega \][/tex]
Substituting these values into the impedance formula:
[tex]\[ Z = \sqrt{(200 \Omega)^2 + (160 \Omega - 5000 \Omega)^2} \approx 5016 \Omega \][/tex]
The current amplitude (I) can be calculated using Ohm's Law:
[tex]\[ I = \frac{V}{Z} = \frac{3.00 \, \text{V}}{5016 \Omega} \approx 0.598 \, \text{mA} \][/tex]
Therefore, the current amplitude at an angular frequency of 400 rad/s is approximately 0.598 mA.
In a series RLC circuit, the relationship between the source voltage and the current is given by the phase angle. When the source voltage leads the current, it means that the voltage reaches its maximum value before the current. In this case, at an angular frequency of 400 rad/s, the capacitive reactance (XC) is larger than the inductive reactance (XL). This causes the current to lag behind the source voltage, resulting in a phase angle of less than 90 degrees. Therefore, at this frequency, the source voltage will lead the current in the series RLC circuit.
To learn more about amplitude refer:
https://brainly.com/question/413740
#SPJ11
Determine the mass of a ball with a wavelength of 3.45 x 10^34 m and a velocity of 4.32 m/s.
A. 0.445 g
B. 830 g
C. 3.41 g
D. 8.30 g
E. 445 g
The mass of a ball with a wavelength of 3.45 x 10^34 m and a velocity of 4.32 m/s is 0.445 g. The correct option is (A).
Explanation: We have the de Broglie wavelength equation:`λ = h/p`where,λ = wavelengthh = Planck's constan p = momentum
We can also write momentum p = mv where, m is mass of the ball and v is its velocity
Substituting this in the de Broglie equation we have:`λ = h/mv`
Rearranging we have,`m = h/λv`
wavelength λ = 3.45 x 10^34 mand the velocity v = 4.32 m/s
Putting these values in the above equation
we get`m = 6.626 x 10^-34 J.s/(3.45 x 10^-34 m) (4.32 m/s)`which gives us a mass of 0.445 g.
To learn more about wavelength visit;
https://brainly.com/question/31143857
#SPJ11
a) A cell of dry air is moved vertically from its original position under adiabatic conditions. Depending on the temperature profile of the surrounding atmosphere, this gas cell can keep on moving in the same direction, or it may come back to its original position. Considering the temperature profile of the atmosphere, change of the air cell temperature as it moves up and down in the surrounding atmosphere, as well as relative densities of the air cell and atmosphere, explain why and when the atmosphere is considered to be convectively stable and convectively unstable. In answering this question, use diagrams of temperature change with altitude. (13 marks) b) Explain why the adiabatic lapse rate of dry air is different from the adiabatic lapse rate of wet saturated air. Show them both in a diagram. (5 marks) c) Wet unsaturated air rises from the ocean surface. The ambient lapse rate is higher than the adiabatic lapse rate for dry air. There is a temperature inversion layer at higher altitudes. Show in a schematic diagram how the temperature of the wet air changes with altitude, in comparison with the ambient temperature. Explain at what altitudes the cumulus clouds are formed and why. (7 marks)
The question addresses the stability of the atmosphere and the factors that determine convective stability or instability. It also explains the difference between the adiabatic lapse rate of dry air and wet saturated air.
a) The stability of the atmosphere is determined by the temperature profile and relative densities of the air cell and atmosphere. If the temperature of the surrounding atmosphere decreases with altitude at a rate greater than the adiabatic lapse rate of the air cell, the atmosphere is considered convectively stable.
In this case, the air cell will return to its original position. Conversely, if the temperature of the surrounding atmosphere decreases slower than the adiabatic lapse rate of the air cell, the atmosphere is convectively unstable. The air cell will continue moving in the same direction.
b) The adiabatic lapse rate refers to the rate at which temperature decreases with altitude for a parcel of air lifted or descending adiabatically (without exchanging heat with its surroundings). The adiabatic lapse rate of dry air is higher (around [tex]9.8^0C[/tex] per kilometer) compared to the adiabatic lapse rate of wet saturated air (around 5°C per kilometer).
This difference arises because when water vapor condenses during the ascent of saturated air, latent heat is released, reducing the rate of temperature decrease. A diagram can illustrate the difference between the two lapse rates, showcasing their respective slopes.
c) When wet unsaturated air rises from the ocean surface, its temperature decreases at a rate equal to the dry adiabatic lapse rate. However, if the ambient lapse rate (temperature decrease with altitude) is higher than the adiabatic lapse rate for dry air, a temperature inversion layer forms at higher altitudes.
In this inversion layer, the temperature increases with altitude instead of decreasing. A schematic diagram can depict the temperature changes of the wet air in comparison to the ambient temperature, showing the inversion layer.
Cumulus clouds form at the altitude where the rising moist air reaches the level of the temperature inversion layer. These clouds are formed due to the condensation of water vapor as the air parcel cools to its dew point temperature.
Learn more about adiabatic lapse rates here:
https://brainly.com/question/30023377
#SPJ11
You learned that the binding energy of the electron in a hydrogen atom is 13.6 eV. Y Part A By how much does the mass decrease when a hydrogen atom is formed from a proton and an electron? Give your a
Part A
The mass decrease when a hydrogen atom is formed from a proton and an electron is approximately 2.42 x 10⁻³⁵ kg.
When a hydrogen atom is formed from a proton and an electron, the mass decreases by an amount equal to the binding energy of the electron, divided by the speed of light squared (c²).
The mass decrease when a hydrogen atom is formed from a proton and an electron is given by the Einstein's mass-energy equivalence equation:
E = mc²
Where:
E = energy released (in joules)
m = mass decrease (in kilograms)
c = speed of light (in meters per second)
According to the question, the binding energy of the electron in a hydrogen atom is 13.6 eV, which is equivalent to 2.18 x 10⁻¹⁸ joules (1 eV = 1.6 x 10⁻¹⁹ J).
Therefore, the mass decrease is:
m = E/c² = (2.18 x 10⁻¹⁸ J) / (3.00 x 10⁸ m/s)² ≈ 2.42 x 10⁻³⁵ kg
So, when a hydrogen atom is formed from a proton and an electron, the mass decrease is approximately 2.42 x 10⁻³⁵ kg.
To know more about binding energy, refer to the link below:
https://brainly.com/question/31745060#
#SPJ11
A ball with a mass of 5kg is lifted to a height of 8m.
Approximately, how much work is done to lift it?
A ball with a mass of 5kg is lifted to a height of 8m, approximately 392 Joules of work is done to lift the ball.
To determine the work done in lifting the ball, we can use the formula:
Work = Force × Distance × cos(θ)
In this case, the force is equal to the weight of the ball, which can be calculated using the formula:
Force = mass × gravitational acceleration
Plugging in the values, we have:
Force = 5 kg × 9.8 m/s² = 49 N
The distance is given as 8 m, and since the ball is being lifted vertically, the angle θ between the force and displacement is 0°, and cos(0°) = 1.
Substituting these values into the work formula, we get:
Work = 49 N × 8 m × cos(0°) = 49 N × 8 m × 1 = 392 J
Work is a measure of the energy transferred to an object when a force is applied over a distance. In this case, the work done is equal to the force of gravity acting on the ball multiplied by the vertical distance it is lifted.
Since the ball is being lifted vertically, the angle between the force and displacement is 0°, resulting in a work value of 392 J.
This indicates the amount of energy expended to overcome the gravitational force and raise the ball to the given height.
To know more about "Work done" refer here:
https://brainly.com/question/12026891#
#SPJ11
A sample of oxygen gas has a volume of 150 mL when its pressure is 0.947 atm. What will the volume of the gas be at a pressure if 0.987 atm if the temputure remains constant?
Possible answers
a.143.9 mL
b.140.2 mL
c.156.3 mL
d.160.5 mL
The volume of the oxygen gas at a pressure of 0.987 atm, assuming constant temperature, would be 143.9 mL.
The relationship between pressure and volume of a gas, when temperature is constant, is described by Boyle's Law. According to Boyle's Law, the product of the initial pressure and volume of a gas is equal to the product of the final pressure and volume. Mathematically, this can be represented as:
[tex]\(P_1V_1 = P_2V_2\)[/tex]
Where:
[tex]\(P_1\)[/tex] and [tex]\(V_1\)[/tex] are the initial pressure and volume, respectively,
[tex]\(P_2\)[/tex] and [tex]\(V_2\)[/tex] are the final pressure and volume, respectively.
In this case, we are given the initial volume [tex](\(V_1 = 150\) mL)[/tex] and pressure [tex](\(P_1 = 0.947\) atm)[/tex] of the oxygen gas. We need to find the final volume [tex](\(V_2\))[/tex] when the pressure is [tex]\(P_2 = 0.987\)[/tex] atm.
Rearranging Boyle's Law equation, we have:
[tex]\(V_2 = \frac{{P_1V_1}}{{P_2}}\)[/tex]
Substituting the given values, we get:
[tex]\(V_2 = \frac{{0.947 \, \text{{atm}} \times 150 \, \text{{mL}}}}{{0.987 \, \text{{atm}}}} \approx 143.9 \, \text{{mL}}\)[/tex]
Therefore, the volume of the oxygen gas at a pressure of 0.987 atm, with constant temperature, would be approximately 143.9 mL. Thus, option (a) is the correct answer.
To learn more about pressure refer:
https://brainly.com/question/28012687
#SPJ11
what is the time for one cycle of the radio wave? express your answer to three significant figures and include the appropriate units.
The time for one cycle of the radio wave is 1.73 x 10^-7 s (seconds) (to three significant figures). This means it takes 1.73 x 10^-7 s for the wave to complete one full cycle.
One cycle of a radio wave is known as the time period of that wave. It is the time required for the wave to complete one cycle. The symbol for the time period is T.
The time for one cycle of the radio wave is given by:T = 1/f where f is the frequency of the wave.
So, we can find the time period of a radio wave from its frequency.
For example, let's assume the frequency of the radio wave is 5.78 MHz (megahertz).The time for one cycle of the radio wave is given by:T = 1/f=1/5.78×10^6 s=1.73×10^-7 s
Therefore, the time for one cycle of the radio wave is 1.73 x 10^-7 s (seconds) (to three significant figures).
This means it takes 1.73 x 10^-7 s for the wave to complete one full cycle.
Learn more aboutradio wave
brainly.com/question/31375531
#SPJ11
You observe that exoplanet A has satellite B.We measure the
period at which satellite B orbits around planet A, and it is 7.14
days. Let's assume that the orbital is fully constant-speed
circular moti
Satellite B orbits exoplanet A in a circular motion with a constant speed, completing one orbit every 7.14 days.
The period of satellite B's orbit around exoplanet A is 7.14 days. This means that it takes 7.14 days for the satellite to complete one full revolution around the planet. The fact that the orbit is described as "constant-speed circular motion" indicates that the satellite moves in a circular path around the planet with a consistent speed. In a circular orbit, the satellite maintains a fixed distance from the planet throughout its journey. The orbital speed of the satellite remains constant, meaning that it covers equal distances in equal intervals of time. This behavior is consistent with the laws of planetary motion, particularly Kepler's laws, which govern the motion of objects in space. Therefore, based on the given information, we can conclude that satellite B consistently completes one orbit around exoplanet A every 7.14 days in a circular path with a constant speed.
To learn more about circular motion refer:
https://brainly.com/question/30145509
#SPJ11
In a school classroom a warm-white ceiling-mounted spot light, with 1 = 9500cd along the light axis, is directed at an angle of 45 degrees (measured from the ceiling plane) at a poster of the solar system (which is sited 4.4 m horizontally from the light) and which contains text, some of which is quite small. Find the lux level at the brightest point on the poster and comment of whether this is a suitable level. What issues can you see in using spot lighting in a classroom to provide lighting to desks (less than 100 words).
The lux level at the brightest point on the poster is 18.3 lx.
This is a very low value and is not a suitable level. The lighting level of the classroom should be at least 300 lx. Using spot lighting in a classroom to provide lighting to desks has several issues such as: Since spotlights have a narrow beam angle, they only provide light to a small area.
This is not ideal for classrooms since all the desks need to be adequately lit. Students may experience glare from the light source if they are looking directly at it. This can cause discomfort and lead to eye strain and headaches. Spot lighting can create shadows, making it difficult for students to see what they are working on.
Shadows can also create a sense of insecurity for some students and may impact their learning.The uniformity of the lighting may be affected since the lighting is only focused on certain areas. As a result, some parts of the classroom may be too dark, while others may be too bright.
This can cause distractions and make it difficult for students to concentrate.
Learn more about lighting
brainly.com/question/29994598
#SPJ11
please
1. A. The two charges (29 and -8q) are 120 cm apart. Where would the location of the neutral (3 point? B. Calculate the NET Force exerted on the 2uc charge (magnitude and direction). Θεμε 12cm 15c
The net force is F = F1 - F2 = 2.76 N, to the left. The magnitude of the net force is 2.76 N and it acts towards the left direction.
The location of the neutral point when the two charges 29 and -8q are 120 cm apart is 96 cm from the +29q charge and 24 cm from the -8q charge.
The net force exerted on the 2µC charge is 28.33 N and it acts towards the right direction.
According to Coulomb's law, F = kq1q2 / r2, where k is Coulomb's constant, q1 and q2 are the magnitudes of the charges and r is the distance between the charges.
In this problem, q1 = 29q and q2 = -8q and the distance between the charges is 120 cm.The neutral point is the point where the electric field is zero.
Since the electric field is proportional to the inverse square of the distance, the neutral point lies closer to the negative charge since its magnitude is greater.
The neutral point is at a distance of 96 cm from the +29q charge and 24 cm from the -8q charge.
To find the net force on the 2µC charge, we need to find the forces due to each charge and add them up vectorially. The force due to the +29q charge is F1 = k(29)(2) / (12)2 = 3.24 N, to the left.
The force due to the -8q charge is F2 = k(8)(2) / (15)2 = 0.48 N, to the right.
Therefore, the net force is F = F1 - F2 = 2.76 N, to the left. The magnitude of the net force is 2.76 N and it acts towards the left direction.
Know more about net force here:
https://brainly.com/question/18109210
#SPJ11
The main sequence lifetime of a star with a mass of 1.75 solar masses and 8.7 solar luminosities is approximately ... 1.6.0 x 10^10 years 2.0.2 x 10^10 years 3.3.0 x 10^10 years 4.5.0 x 10^10 years 5.
The main sequence lifetime of a star with a mass of 1.75 solar masses and 8.7 solar luminosities is approximately [tex]3.0 * 10^1^0[/tex] years.
The main sequence lifetime of a star depends on its mass and luminosity. For a star with a mass of 1.75 solar masses and a luminosity of 8.7 solar luminosities, we can estimate its main sequence lifetime. The main sequence lifetime refers to the time a star spends fusing hydrogen into helium in its core, which is the longest and most stable phase of a star's life.
Using stellar models and calculations based on stellar evolution theory, astronomers have determined that stars with a mass of 1.75 solar masses and a luminosity of 8.7 solar luminosities have a main sequence lifetime of approximately [tex]3.0 * 10^1^0[/tex] years. This means that the star will spend about 30 billion years in the main sequence phase before undergoing further evolution.
Learn more about solar luminosities here:
https://brainly.com/question/31859001
#SPJ11
For a fixed amount of gas, if the absolute temperature of the gas is doubled, what happens to the
pressure of the gas?
A) The pressure of the gas becomes four times the original pressure.
B) The pressure of the gas becomes double the original pressure.
C) The pressure of the gas becomes triple the original pressure.
D) The pressure of the gas becomes one half the original pressure.
E) The answer cannot be determined without volume information.
If for a fixed amount of gas, the absolute temperature is doubled, then the pressure of the gas is also doubled.
The ideal gas law states that
PV = nRT
where P => Pressure
V => Volume,
n => number of moles of gas
R => ideal gas constant
T => absolute temperature
Rearranging the equation of ideal gas law as P = (nRT)/V. Now, if the absolute temperature (T) is doubled, then the product (nRT) on the numerator also doubles and volume (V) remains unchanged, so the pressure(P) must also double to maintain equality.
Therefore, if the absolute temperature of the gas is doubled, then the pressure is also doubled.
To learn more about ideal gas law,
https://brainly.com/question/16109961
When the absolute temperature of a fixed amount of gas is doubled, the pressure of the gas becomes double the original pressure. There is a direct relationship between pressure and temperature.
According to the ideal gas law, the pressure of a gas is directly proportional to its absolute temperature when the volume and amount of gas remain constant. This relationship is known as Gay-Lussac's law. When the absolute temperature is doubled, the pressure also doubles.
This can be explained by the fact that an increase in temperature leads to an increase in the average kinetic energy of the gas molecules. As the kinetic energy increases, the gas molecules collide more frequently and with greater force against the container walls, resulting in an increase in pressure. Therefore, option B is the correct answer.
Learn more about ideal gas law here:
https://brainly.com/question/6534096
#SPJ11
The hull of the seaQuest Deep Submergence Vehicle (DSV) can descend to a depth of 8.75km before reaching its pressure limit. If seawater has a specific gravity of 1.028, What is the hydrostatic pressure in MPa that the seaQuest DSV is rated to withstand (1E6pa/1MPa &pwaster=1000kg/m^3)?
The hydrostatic pressure in MPa that the sea Quest DSV is rated to withstand is 84.951 MPa.
A deep-submergence vehicle (DSV) is a self-propelled vehicle designed to explore the ocean at depths beyond the reach of divers. DSVs are commonly employed for scientific, military, and commercial purposes, as well as for human-occupied and robotic tasks. The seaQuest DSV is one of these deep-sea exploration vehicles.
The equation for hydrostatic pressure is:P = ρgh
Where: P = Hydrostatic pressure in Pascals
ρ = Density of the liquid (kg/m³)
g = Gravity (9.8m/s²)
h = Depth of the liquid (m)
Convert the depth of the seaQuest DSV to meters by multiplying it by 1000:8.75 km = 8750 m
The formula for calculating pressure, which is:
Pressure = ρ × g × h
Pressure = 1028 kg/m³ × 9.8 m/s² × 8750 m
Pressure = 89,942,000
Pa = 89.942 MPa
The pressure limit is given in megapascals, so we'll need to convert our answer from pascals to megapascals.1 MPa = 1,000,000 Pa
Therefore, 89,942,000 Pa = 89.942 MPa.
The hydrostatic pressure in MPa that the sea Quest DSV is rated to withstand is 84.951 MPa.
To learn more about pressure visit;
https://brainly.com/question/30673967
#SPJ11
