Answer:
c
Explanation:
write down the expressions for the heat produced per second in a resistor in terms of potential difference and resistance
Answer:
[tex]H=\frac{V^2}{R}[/tex]
Explanation:
Let H be heat produced per sec
Time, t=1 sec
Resistance of resistor=R ohm
We have to write down the expression for the heat produced per second in a resistor in terms of potential difference and resistance.
We know that
Heat, [tex]H=I^2 Rt=\frac{V^2}{R}t[/tex]
Substitute the value
Then, we get
Heat,[tex]H=\frac{V^2}{R}\times 1[/tex]
[tex]H=\frac{V^2}{R}[/tex]
This is required expression for the heat produced per second in a resistor in terms of potential difference and resistance.
Please help me, I'm not good in physics.
You press your physics textbook flat against a vertical wall with your hand. What is the direction of the friction force exerted by the wall on the book? (a) downward (b) upward (c) out from the wall (d) into the wall. (Serway and Jewett, 2009) What type of friction is present?
Answer:
Upward direction.
The friction is kinetic friction
when you come out of a river you feel cold. why?
Answer:
the wind
Explanation:
Newton’s first law of motion states that an object's motion remains the same unless a force acts upon it. What would be an example of this law in action?
Answer:
A driver breaks suddenly and the passengers are flung forward
in the equation for the gravitational force between two objects which quantity must be squared?
Answer:
Distance
Explanation:
trust me
Answer:
The distance "r" must be squared
Explanation:
In the equation F=GMm/r^2, the distance "r" is squared, which represents the distance between masses M and m and G is the gravitational constant.
What came first, a chicken or an egg
Answer:
a chicken
a chicken came first
Answer:
A Chicken
A chicken came first
if tje object is placed pf the focus of a concave mirror the image is formed....
Answer:
when object is kept at focus then image will form at infinity
Explanation:
virtual erect highly diminished image will be formed and it is used in the lense in galilean telescope
Which frequencies can humans can hear but not mice
7. Roughly how much did the cost of PV solar panels decrease between 2008 and 2015?
40%
80%
60%
20%
US 0
Which of the following is NOT available for drinking
A) groundwater
B) lakes
C) rivers with tributaries
D) frozen ice caps
Answer:
B
Explanation:
lakes are too big or largeThe pressure due to the liquid on an object immersed in that liquid is 4500 Pa
The density of the liquid is 900 kg/m.
What is the depth of the object below the surface of the liquid ?
Answer:
The depth of the object below the surface of the liquid is 0.510 meters.
Explanation:
The hydrostatic pressure ([tex]P[/tex]), measured in pascals, experimented by the object is directly proportional to density of the fluid ([tex]\rho[/tex]), measured in kilograms per cubic meter, gravitational acceleration ([tex]g[/tex]), measured in meters per square second, and depth of the object ([tex]h[/tex]), measured in meters. That is:
[tex]P = \rho\cdot g \cdot h[/tex] (1)
If we know that [tex]P = 4500\,Pa[/tex], [tex]\rho = 900\,\frac{kg}{m^{3}}[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then the depth of the object is:
[tex]h = \frac{P}{\rho\cdot g}[/tex]
[tex]h = \frac{4500\,Pa}{\left(900\,\frac{kg}{m^{3}} \right)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}[/tex]
[tex]h = 0.510\,m[/tex]
The depth of the object below the surface of the liquid is 0.510 meters.
The depth of the object below the liquid's surface will be
"0.510 m".
Pressure and DensityAccording to the question,
Object immersed, P = 4500 Pa
Density of liquid, ρ = 900 kg/m³
Acceleration due to gravity, g = 9.8 m/s²
We know the relation,
→ Hydrostatic pressure (P) = ρ.g.h
or,
Depth will be:
→ h = [tex]\frac{P}{\rho .g}[/tex]
By substituting the values,
= [tex]\frac{4500}{900\times 9.8}[/tex]
= [tex]\frac{4500}{8820}[/tex]
= 0.510 m
Thus the above answer is appropriate.
Find out more information about pressure here:
https://brainly.com/question/1831566
What do you need to include in a free body diagram?
Answer:
Interact with it
Explanation:
The body in a condensed form (often a dot or a box)
Straight arrows pointing in the direction in which forces act on the body are represented.
Moments are portrayed by curved arrows pointing in the direction in which they impact the body.
A coordinate system is a series of coordinates.
.A 0.6 kg basketball is thrown straight up at a velocity of 4 m/s. What is the initial kinetic energy of the basketball?
Answer:
the initial kinetic energy of the basket ball is 4.8 J
Explanation:
The computation of the initial kinetic energy of the basket ball is shown below:
As we know that
Initial kinetic energy is
[tex]= \frac{1}{2}mv^2 \\\\= \frac{1}{2}\times 0.6 \times (4m/s)^2\\\\= \frac{1}{2}\times 0.6 \times 16m/s^2\\\\= 4.8 J[/tex]
Hence, the initial kinetic energy of the basket ball is 4.8 J
if a circuit has 3 A of current and a 5 ohm resistor, how many volts are powering the circuit
Answer:
Given =
Current = 3 A
Resistance = 5 ohm
Solution =
By Ohm's Law
R = V/I
V = R x I
V = 5 x 3
V = 15 volts. Answer
Explain the difference between mass and weight. Also, what happens to your mass and your weight if you were to travel to the moon? Why?
PLEASE HURRY!!
What is the pressure of the water coming out the bottom of a water tower that is 50 m
high in the air. (Density of water (1000kg/m^3).
Answer:
49,000 Pa
49 kPa
Explanation:
P (pressure)= hρg, where h= height, ρ=density, and g= acceleration due to gravity.
50 m * 1000kg/m³ * 9.8 m/s²
=49,000 kg*m⁻¹s⁻² OR 49,000 Pa OR 49 kPa
Is a bird sitting motionless on a perch, balanced or unbalanced?
2.5 x 103 kilogram truck with rubber tires moves through a 120 meter radius turn on a dry asphalt surface.
a. Determine the force of friction acting on the truck's tires during the turn.
b. Calculate the maximum speed with which the truck could have made this turn.
Answer:
a. The friction force acting on the truck's tires during the turn, is approximately 20,875 N
b. The maximum velocity with which the truck could make the bend is approximately 31.654 m/s
Explanation:
The given parameters of the truck are;
The mass of the truck, m = 2.5 × 10³ kg
The tire material = Rubber
The radius of the turn the through which the truck moves = 120 meters
The material and condition of the surface = Dry asphalt
a. The coefficient of friction of rubber tires on dry asphalt, μ ≈ 0.85 (researchgate (internet source))
The weight of the truck, W = m × g
Where;
m = The mass of the truck = 2.5 × 10³ kg
g = The acceleration due to gravity = 9.8 m/s²
∴ W = 2.5 × 10³ kg × 9.8 m/s² = 24,500 N
The force of friction acting on the tires, [tex]F_f[/tex] = W × μ
∴ [tex]F_f[/tex] = 24,500 N × 0.85 ≈ 20,875 N
The friction force acting on the truck's tires during the turn, [tex]F_f[/tex] ≈ 20,875 N
b. The centrifugal force the truck observes while turning through the bend, 'F', is given as follows;
F = m·v²/r
Therefore, the maximum velocity with which the truck could make the bend, 'v', is given when fiction force, '[tex]F_f[/tex]', is equal to the centripetal force, F
When [tex]F_f[/tex] = F, we have;
W × μ = m·v²/r
∴ 20,875 N = 2.5 × 10³ kg × v²/(120 m)
∴ v² = 20,875 N × (120 m)/(2.5 × 10^3 kg) = 1002 m²/s²
v = √(1002 m²/s²) ≈ 31.654 m/s
The maximum velocity with which the truck could make the bend, v ≈ 31.654 m/s
According to this question;
The mass of the truck (m) = 2.5 × 10³ kgThe radius of the turn = 120mThe coefficient of friction of rubber tires on dry asphalt, μ ≈ 0.85QUESTION 1:
Weight of the truck (W) = m × gWhere;
m = mass of the truck = 2.5 × 10³ kgg = acceleration due to gravity = 9.8 m/s²W = 2.5 × 10³ kg × 9.8 m/s² = 24,500 NThe force of friction acting on the tires, = W × μ= 24,500 N × 0.85 ≈ 20,875 NThe force of friction acting on the truck's tires during the turn = 20,875 NQUESTION 2:
Centrifugal force of the truck can be calculated as follows: F = mv²/rHowever, force of friction (Ff) is equal to centripetal force (F). That is;W × μ = m·v²/r20,875N = 2.5 × 10³ kg × v²/(120 m)v² = 20,875 × 120/2.5 × 10³ = 1002 m²/s²v = √1002 = 31.654m/sThe maximum velocity with which the truck could make the turn = 31.654 m/s.Learn more about force of friction at: https://brainly.com/question/4230804?referrer=searchResults
What is the net force on a 100kg object accelerating at 3 m/s
Answer:hence, the force needed to accelerate the 1000kg car by 3m/s2 is 3000N
Explanation:
plz mark as brainlyist plz
please help me guys please please please please please please please please please please please please please
Answer:
1.F = 256 N
2.a = 8 m/s/s
By looking at the given information, you know force, and an acceleration. Therefore you have enough information to use the first formula.
F = ma
256 N = m * 8 m/s/s
m = 256 N/8 m/s/s
m = 32 Kg
A 5 kg object moving to the right at 4 m/s collides inelastically with a 5 kg object
moving to the left at 4 m/s. The final velocity of both objects will be
Answer:
The linear momentum of a particle with mass m moving with velocity v is defined as
p = mv (7.1)
Linear momentum is a vector . When giving the linear momentum of a particle you must
specify its magnitude and direction. We can see from the definition that its units must be
kg·m
s
. Oddly enough, this combination of SI units does not have a commonly–used named so
we leave it as kg·m
s
!
The momentum of a particle is related to the net force on that particle in a simple way;
since the mass of a particle remains constant, if we take the time derivative of a particle’s
momentum we find
dp
dt = m
dv
dt = ma = Fnet
so that
Fnet =
dp
dt (7.2)
An object travels a distance of 56 meters to the right in 7 seconds. What is the object's velocity?
Explanation:
Distance travelled (d) = 56 metres
Time taken (t) = 7 seconds
velocity of the object (V)
= d / t
= 56 / 7
= 8 m/s
The velocity of the object is 8 m/s.
Hope it will help :)
32) In an electrical circuit the current is measured in
A) amps using an ammeter.
B) amps using a voltmeter.
C) volts using an ammeter.
D) volts using a voltmeter.
Answer:
A) amps using an ammeter.....
A 75 kg baseball player runs at a velocity of 6 m/s and sliding 2 m what is the force of friction that acts upon him?
Answer:
1350N
Explanation:
Given data
mass= 75kg
velocity= 6m/s
distance= 2m
The expression for the applied force is given as
F= mv^2/d
Substitute
F= 75*(6)^2/ 2
F= 75*36/2
F= 2700/2
F= 1350N
Hence the force is 1350N
The heat from the sun travels to Earth___
A. In high-frequency waves
B.In low frequency-waves
C.Through the movement of molecules
D.By conduction and convention
Answer:
a in high frequency waves
Explanation:
because of the thermal radiation from the sun
Answer:
The answer is B, "In low frequency-waves"
Explanation:
I got this right on my lesson! Have a great day! (-;
4. A substance is cut into several piece and compared to the density of the
original sample. The density of each piece will be:-
areater
bl the same
Answer:
The density pf each piece will be the same, since density is defined as a mass per unit volume, so even when you cut an object it will not change
A student places his hand in front of a plane mirror as shown in the diagram. Which terms correctly describe the image that the mirror forms?
please please please hellpppppppp!!!!!!
Answer:
The Answer is A
Explanation:
A man who has type B blood (genotype: BB) is married to a woman with type O blood. What blood type will their children have? blood typing
What causes moons to orbit planets and  planets to orbit stars
Answer:Orbits are the result of a perfect balance between the forward motion of a body in space, such as a planet or moon, and the pull of gravity on it from another body in space, such as a large planet or star. An object with a lot of mass goes forward and wants to keep going forward; however, the gravity of another body in space pulls it in.
Explanation:
