Answer: 50.806 cm is the correct answer.
Explanation: First divide 6104.5 cm^2 by 22.3 cm.
[tex]\frac{6104.5cm^2}{22.3cm} = 273.74 cm[/tex]
*Note: When dividing units, subtract the exponents, and when multiplying units simply add the exponents.
Then continue by subtracting 324.55 cm - 273.74 cm.
This should give you an answer of 50.806 cm.
In the reaction below, 1.000 × 103 g LiOH is combined with 8.80 × 102 g CO2. The reaction produces 3.25 × 102 g H2O in an experiment.
CO2 + 2LiOH → Li2CO3 + H2O
theoretical yield
Answer:
CO2
Explanation:
100% CORRECT ON EDGE
The mass of water produced when 1.000 × 10³ g of LiOH is combined with 8.80 × 10² g CO₂ is 3.25 × 10² g H₂O.
What is mass?Mass is defined as a dimensionless number used to describe the mass of a particle or item. The kilogram is the International System's (SI) preferred unit of mass (kg). Atoms make up everyday matter. A majority of an atom's mass is contained in its nucleus.
It is a neutralization process when lithium hydroxide and carbon dioxide combine to form water and lithium carbonate.
The reaction is [tex]\rm CO_2 + 2LiOH \rightarrow Li_2CO_3 + H_2O[/tex]
Neutralization reaction is defined as an acid and base reaction that produces an ionic molecule and potentially water.
Thus, the mass of water produced when 1.000 × 10³ g of LiOH is combined with 8.80 × 10² g CO₂ is 3.25 × 10² g H₂O.
To learn more about mass, refer to the link below:
https://brainly.com/question/19694949
#SPJ2
What is the freezing point of an aqueous suger (C12H22O11) solution that boils at 110C°?
Sucrose doesn't show appreciable dissociation in water, so i≈1 in this case. by extension, −7.3°C is the approximate freezing point of this solution.
What is the freezing point?The temperature at which a liquid solidifies.
Sucrose doesn't show appreciable dissociation in water, so i≈1 in this case. by extension, −7.3°C is the approximate freezing point of this solution.
Learn more about the freezing point here:
https://brainly.com/question/3543605
#SPJ1
Which of the following is an example of a metamorphic rock?
Granite
Limestone
Marble
Pumice
Answer:
C
Explanation:
Marble is the correct answer
Which of the following would cause an increase in the magnetic force
between two magnets?
A. Decreasing the separation between the two magnets
B. Increasing the separation between the two magnets
C. Decreasing the amount of excess charge on the first magnet
D. Increasing the amount of excess charge on the first magnet
Decreasing the separation between the two magnets will result in increase in the magnetic force between two magnets.
What is a Magnet?This is referred to a substance which produces magnetic field and result in the attraction and repulsion of certain types of things.
Increase in the separation will reduce the magnetic force and vice versa which is why option A was chosen.
Read more about Magnet here https://brainly.com/question/14997726
#SPJ1
how many moles of FeCl3 are produced when 3.0 mole.of Fe react eith excess Cl2 gas?
Which buffer can be suitable to prepare a solution that needs to be buffered at pH 4? Explain your
choice.
A. Formic acid/Formiate buffer
B. Carbonic acid/Bicarbonate buffer
C. Ammonia/Ammonium buffer
D. Any buffer will work.
E. None of the buffers will be suitable.
34 Which of the following will form a buffer when mixed together? Explain
.
Which buffer can be suitable to prepare a solution that needs to be buffered at pH 4? Explain your
choice.
A. Formic acid/Formiate buffer
B. Carbonic acid/Bicarbonate buffer
C. Ammonia/Ammonium buffer
D. Any buffer will work.
E. None of the buffers will be suitable.
34 Which of the following will form a buffer when mixed together? Explain a weak acid/base and its conjugate base/acid in the form of salt
Predict the nature of the indicated
covalent bond.
non-polar
Explanation :
Hydrogen and carbon have similar electronegativity values, so the C—H bond is not normally considered a polar covalent bond.
Which element has properties most like Mg?
Answer:
The elements which are in the group
What is the primary purpose of a rate law?
Oto determine if a chemical reaction will be exothermic or endothermic
O to determine the amount of product that is formed from the concentration of reactants
O to show the relationship between the concentration of reactants and the reaction rate
O to show a relationship between the amounts of gas that can dissolve into a liquid
The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option
What is rate law ?A rate law shows how the rate of a chemical reaction depends on reactant concentration.
For a reaction such as aA → products, the rate law generally has the form
rate = k[A]ⁿ,
where,
k is a proportionality constant called the rate constantn is the order of the reaction with respect to A.Typically, increased concentrations of reactants increases the speed of the reaction, because there are more molecules colliding and reacting with each other.
Hence , The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option
Learn more about rate law here ;
https://brainly.com/question/4222261
#SPJ1
Magnesium reacts with sulfuric acid according to the fol-
lowing equation. How many moles of H₂ are produced by
the complete reaction of 230. mg of Mg with sulfuric acid?
Mg(s) + H₂SO (aq) →
MgSO₂(aq) + H₂(g)
Answer:
The moles of H2 is 230-two hundred and thirty
Calculate the mass of pure sodium chloride will yield enough hydrogen chloride gas to tralize 25 cm² of 0.5 M potassium trioxo- bonate(IV) solution. NACI=58.5, HC1 = 36.5, K,CO, = 138)
Describe the characteristics that identify a sample of matter as being a substance.
No matter how big or little a material is, its properties remain the same. Size, form, color, and mass are the qualities that distinguish a material from non-substances. All of these qualities, including size, shape, color, and mass, can be seen and measured. Some characteristics are physical, while others are chemical. Physical characteristics include mass, volume, density, and color. Viscosity and solubility are examples of chemical qualities.
A 2.49 g sample of aniline (C6H5NH2, molar mass = 93.13 g/mol) was combusted in a bomb calorimeter with a heat capacity of 4.25 kJ/°C. If the temperature rose from 29.5°C to 69.8°C, determine the value of ΔH°comb for aniline.
The value of delta H° for aniline = 6415 Kj/mol
calculation
Step 1: find heat
Q (heat) = C (specific heat capacity) x ΔT (change in temperature)
C= 4.25 kj/c°
ΔT = 69.8-29.5 = 40.3 c°
Q= 4.25 kj/c x 40.3 c = 171.28 kj
Step 2: find the moles of aniline
moles = mass/molar mass
= 2.49 g/ 93.13 g/mol =0.0267 moles
Step 3: find delta H
171.28 kj/0.0267 mol = 6415 kj/mol
since the reaction is exothermic delta H = 6415 Kj/mol
Answer:
-6.41x10^3
Explanation:
2.49 is 3 significant figures, so your answer should reflect that. Since heat is lost to the surroundings, the reaction is exothermic, and the answer should be negative.
Calculate the mass in grams of each of the following using dimensional analysis:
a. 6.02 x 1023 atoms of Mg
3.01 x 1023 formula units of CaCl2
12.4 x 1015 molecules of formaldehyde (CH2O)
The mass in grams of each of the following using dimensional analysis is:
6.02 x 10²³ atoms of Mg = 12g of Mg3.01 x 10²³ formula units of CaCl2 = 55.5g of CaCl212.4 x 10¹⁵ molecules of formaldehyde (CH2O) = 0.000000618g of formaldehydeHow to calculate mass?The mass of a substance can be calculated in different ways depending on whether molecules or moles are given.
First, we need to convert atoms/formula units/molecules to moles as follows:
6.02 × 10²³ ÷ 6.02 × 10²³ = 1 mole of Mg3.01 x 10²³ ÷ 6.02 × 10²³ = 0.5 moles of CaCl212.4 x 10¹⁵ ÷ 6.02 × 10²³ = 2.06 × 10-⁸ moles of formaldehydeNext, we convert each mole value to mass as follows:
1 mole of Mg = 1 × 12 = 12g of Mg0.5 moles of CaCl2 = 0.5 × 111 = 55.5g of CaCl22.06 × 10-⁸ moles of CH2O = 0.000000618g of formaldehydeLearn more about mass at: https://brainly.com/question/19694949
#SPJ1
For the following reaction, 41.0 grams of sulfuric acid are allowed to react with 36.5 grams of zinc hydroxide. What is the maximum amount of zinc sulfate that can be formed? Mass = g What is the FORMULA for the limiting reactant? What amount of the excess reactant remains after the reaction is complete? Mass = g
The FORMULA for the limiting reagent is [tex]ZnOH_2[/tex].
4.27 grams of reactant remains after the reaction is complete.
What is a limiting reagent?The limiting reagent is the reactant that is completely used up in a reaction and thus determines when the reaction stops.
Given data:
Mass of sulfuric acid = 41.0 grams
Molar mass of sulfuric acid = 98.08 g/mol
Mass of zinc hydroxide = 36.5 grams
Molar mass of zinc hydroxide = 99.424 g/mol
Step 1:moles sulfuric acid = mass sulfuric acid / molar mass sulfuric acid
moles sulfuric acid = 41.0 grams / 98.08 g/mol
moles sulfuric acid = 0.41 moles
Step 2: moles of zinc hydroxide
moles zinc hydroxide = 36.5 grams / 99.424 g/mol
moles zinc hydroxide =0.367 moles
Step 3: Calculate limiting reactant
zinc hydroxide is the limiting reactant. It will completely be consumed.
There will remain 0.41 moles - 0.367 moles = 0.043 moles
This is 0.043 moles x 99.424 g/mol
= 4.27 grams
Learn more about the limiting reagent here:
https://brainly.com/question/14155328
#SPJ1
What is the percent yield for the reaction below when
705.0 g SO2 and 80.0 g 0₂ produce 586.0 g SO3?
2SO2(g) + O2(g) → 2SO3(g)
The percent yield would be 68.3%
Percent yieldThis is given as:
Percent yield = yield/theoretical yield x 100%
From the equation:
[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]
The mole ratio of the reactants is 2;1
Mole of 705 g SO2 = 705/64 = 11.02 moles
Mole of 80 g O2 = 80/32 = 2.5 moles
O2 is limiting.
Mole ratio of O2 and SO3 = 1:2
Mole equivalent of SO3 = 2.5 x 2 = 5.0 moles
Mass of 5 moles SO3 = 5 x 80 = 400 grams
Percent yield = 400/586 = 68.3%
More on percent yield can be found here: https://brainly.com/question/17042787
#SPJ1
Question 18 of 32
What is a covalent bond?
OA. A bond in which molecules share electrons
OB. A bond in which atoms share electrons
C. A bond between ions of the same charge
Answer: A. A bond in which molecules share electrons
Cyclopropane is a compound of carbon and hydrogen that is used as a general anaesthetic. When 1 g of this substance was burned completely in oxygen, 3.14 g of carbon dioxide and 1.29 g of water were produced. What is the empirical formula of the compound? The molar mass of cyclopropane is about 42 g/mol. What is the molecular formula?
A corn plant has been genetically engineered. It produces pollen that can make its own toxins. These toxins protect the corn plant against pests. What is a likely impact on the environment around the corn plant?
Bird and butterfly populations around the area may increase.
The concentration of pesticides in a nearby lake would increase.
Newer strains of pesticide-resistant pests may develop.
The carbon dioxide level would increase in the area.
Answer:
I think the answer is "newer strains of pesticide - resistant pests may develop" as I learnt in Biology, but I'm not sure as I don't know anything about corn plants.
Explanation:
Answer:
newer strains of pesticide
Explanation:
Consider this reaction, which occurs in the atmosphere and contributes to photochemical smog:
2Fe(s) + 3Cl2(g) →2FeCl3(s)
If there is 15.52 g Fe and excess Cl2 present, the reaction yields 34.5 g FeCl3. Calculate the
percent yield for the reaction.
%
2Fe(s) + 3Cl₂(g) →2FeCl₃(s)
mol Fe = 15.52 : 56 g/mol = 0.277
mol FeCl₃ = mol Fe = 0.277 (same coefficient)
mass FeCl₃ = 0.277 x 162.2 g/mol = 44.93 g
% yield = 34.5 : 44.93 = 76.79 %
3-chloropropylamine what is?
Answer:
a chemical compound
At a certain temperature this reaction follows first-order kinetics with a rate constant of 0.086 s^-1:
2H3PO4(aq)=P2O5(aq)+3H2O(aq)
Suppose a vessel contains H3PO4 at a concentration of 1.27 M . Calculate how long it takes for the concentration of H3PO4 to decrease to 7.0% of its initial value. You may assume no other reaction is important.
Round your answer to 2 significant digits.
Please, need this ASAP
It takes 31 s for 1.27 M H₃PO₄ to decrease its concentration to 7.0% of its initial value following first-order kinetics.
What is first-order kinetics?First-order kinetics occur when a constant proportion of a reactant disappears per unit time.
Let's consider the following first-order kinetics reaction with a rate constant k = 0.086 s⁻¹.
2 H₃PO₄(aq) = P₂O₅(aq) + 3 H₂O(aq)
Given the initial concentation is [H₃PO₄]₀ = 1.27 M, the concentration representing 7.0% of this value is:
[H₃PO₄] = 7.0% × 1.27 M = 0.089 M
We can calculate the time elapsed (t) using the following expression.
ln ([H₃PO₄]/[H₃PO₄]₀) = - k × t
ln (0.089 M/1.27 M) = - 0.086 s⁻¹ × t
t = 31 s
It takes 31 s for 1.27 M H₃PO₄ to decrease its concentration to 7.0% of its initial value following first-order kinetics.
Learn more about first-order kinetics here: https://brainly.com/question/18916637
#SPJ1
Which of the following is a correct statement regarding the free energy?
It is energy available to create bonds.
It always has the same value.
It is stored between atoms.
It is known as kinetic energy.
Answer:
A
Explanation:
1. 50.0 g of an unknown metal was heated to 95.0 °C and added to 45.0 g of water at 25.0 °C
in a calorimeter. Once the system reached equilibrium the final temperature was 28.5 °C.
Calculate the specific heat capacity of the metal with correct units.
2. 60.0 g of nickel heated to 100.0 °C was added to 55.0 g of water at 25.0 °C inside a
calorimeter and the system was allowed to reach equilibrium. What would be the final
temperature of the metal and water? (specific heat of Ni = 0.44 J/g °C)
.
3. One challenge during calorimetry is to minimize the heat lost to the environment during
the experiment. Suggest how you would minimize the heat loss during the experiment (read
the steps of the experiment before you answer the question)
Answer
Q = mcΔT
Qwater = -Qmetal
(100 g)(4.18 J/g°C)(25°C - 20°C) = -(50 g)c(25°C - 90.0°C)
2090 J = (3250 g °C)c
c = 0.643 J/g °C
describe what happens when two substances at different tempatures come into contact. describe how the law of conservation of energy applies to this system
If two objects at different temperatures are brought in contact with each other, energy is transferred from the hotter object to the colder object.
What is the law of conservation of energy?The total energy of an isolated system remains constant irrespective of whatever internal changes may take place with energy conevrting in one form and reappearing in another.
When two substances at different temperatures come into contact, the substance with a higher temperature will transfer heat energy to the substance with a lower temperature, until their temperatures get equal.
Here, if the two substances are isolated then the law of conservation of energy states that the when heat released by the substance with a higher temperature is the same amount of heat gained by the substance lower a lower temperature.
Learn more about the law of conservation of energy here:
https://brainly.com/question/2513543
#SPJ1
Given the following equation, how many grams of PbCO3 will dissolve when 2.50 L of 1.50 M H+ is added to 3.00 g of PbCO3?
Given
PbCO3(s) + 2H+(aq) = Pb^2(aq)+ +H2O (l)+ CO2(g)
5 grams of sodium chloride is dissolved to make 0.5 L of solution
The concentration of the solution is 0.17M
The missing question is
What is the concentration of the solution ?
What is Molarity ?Molarity is the moles of solute in 1 liter of solution.
It is the measure of concentration of a solution in mol/l .
It is given that
5 grams of sodium chloride is dissolved to make 0.5 L of solution
the concentration of the solution
Molecular weight of Sodium Chloride = 58.44 g
58.44 g of NaCl = 1 mol
5g of NaCl = 5/58.44 = 0.086 moles
Molarity = 0.086 / 0.5
Molarity = 0.17 M
The concentration of the solution is 0.17M
To know more about Molarity
https://brainly.com/question/2817451
#SPJ1
the amount of gram - atoms in two gramm of sulfur is (NB: S=32amu)
Answer:
3.76375e+22
Explanation:
(2/32)×(6.022 × 10^23)
How many grams of Fe(NO3)3 are present in a 20.0 mL sample of a 0.500 M solution?
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
Molarity= number of moles of solute/volume of solution in litre (1)
Where,
moles= given weight /by molecular weight
= w/241.8
Substituting values in equation 1
0.500= (w/241.8)/(20.0 /1000)
w=0.80g
Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ2
What is the molarity of a solution made by dissolving 3.09 moles of NaCl in 1.50 L of solution?
Answer:
2.06M NaCl
Explanation:
Molarity is defined as a ratio of moles of the solute (the substance you're dissolving) to Liters of solution (the volume of the finished solution). It uses the letter capital M as an abbreviation for the unit.
We're given values for both numbers (with the correct units already), so substitute, and calculate the number part:
[tex]\dfrac{n_{solute}}{V_{solution}}=\dfrac{3.09 [\text{mol NaCl}]}{1.50 [\text{L solution}]}=2.06\dfrac{[\text{mol NaCl}]}{[\text{L solution}]}=2.06[\text{M NaCl}][/tex]
