Who am I? Periodic table 20 questions answers

To calculate the energy of a rogue wave with an amplitude of 15 meters, we can use the following formula:

E = 0.5ρAv^2

where E is the energy of the wave, ρ is the density of the water, A is the amplitude of the wave, and v is the velocity of the wave.

Assuming the density of water is 1000 kg/m^3 and the velocity of the wave is the standard gravitational acceleration of 9.81 m/s^2 (since rogue waves are caused by the interaction of multiple waves), we can calculate the energy of the rogue wave:

E = 0.5 x 1000 kg/m^3 x π x (15 m)^2 x (9.81 m/s^2)^2

E = 1.22 x 10^9 J

Therefore, the energy of a rogue wave with an amplitude of 15 meters is approximately 1.22 x 10^9 joules.

To know more about rogue refer here

https://brainly.com/question/12121401#

#SPJ11

The mass of H₂ used in the reaction, given that 2.75 g of CO was inserted is 0.39 grams

The mass of H₂ used in the reaction can be obtained as illustrated below:

Balanced equation:

CO + 2H₂ -> CH₃OH

From the balanced equation above,

28 grams of CO required 4 grams of H₂

Therefore,

2.75 grams of CO will require = (2.75 grams × 4 grams) / 28 grams = 0.39 grams of H₂

Thus, we can conclude that the mass of H₂ used in the reaction is 0.39 grams

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

Valence electrons are the outermost electrons of an atom, and they play a significant role in determining the atom's chemical properties, including its reactivity.

Valence electrons are responsible for the formation of chemical bonds between atoms, which are essential for the creation of molecules and compounds.

An atom's valence electrons determine its ability to form bonds and interact with other atoms. The number of valence electrons an atom possesses corresponds to its position on the periodic table. For example, elements in the same group of the periodic table have the same number of valence electrons and exhibit similar chemical properties.

Atoms with a full valence shell, such as noble gases, are stable and unreactive because they have no need to form bonds with other atoms. On the other hand, atoms with incomplete valence shells are more reactive and have a strong tendency to bond with other atoms to achieve a full valence shell.

For example, halogens have seven valence electrons and are highly reactive because they only need one more electron to achieve a full valence shell.

The reactivity of an atom depends on the number of valence electrons it has and its ability to form chemical bonds. Atoms with one or two valence electrons tend to lose them to form positive ions, while atoms with five, six, or seven valence electrons tend to gain electrons to form negative ions.

This behavior is due to the fact that a full valence shell is more stable than an incomplete one.

In conclusion, valence electrons are crucial in determining an atom's chemical properties, including its reactivity. The number of valence electrons an atom possesses determines its position in the periodic table and its ability to form chemical bonds with other atoms, which ultimately affects its behavior in chemical reactions.

To know more about Valence electrons, visit:

https://brainly.com/question/28977387#

#SPJ11

To prepare a hydroponic solution with 35 mg/L of phosphorus in a 500 mL volume, you will need to dilute the concentrated calcium dihydrogen phosphate solution.

Firstly, calculate the volume of the concentrated solution required to make the desired concentration. You can apply the formula here:

C1V1 = C2V2

Where C1 is the concentration of the concentrated solution (200 mg/L), V1 is the volume of concentrated solution required, C2 is the desired concentration (35 mg/L), and V2 is the final volume of the solution (500 mL).

Substituting these values, we get:

(200 mg/L) V1 = (35 mg/L) (500 mL)

V1 = (35 mg/L) (500 mL) / (200 mg/L)

V1 = 87.5 mL

So, you need 87.5 mL of the concentrated solution to make 500 mL of the final solution with a phosphorus concentration of 35 mg/L.

To prepare the final solution, measure 87.5 mL of the concentrated solution and add it to a measuring cylinder. Add distilled water to make the remaining 500 mL, and then. Mix the solution well to ensure that the calcium dihydrogen phosphate is evenly distributed.

This will give you a hydroponic solution with a phosphorus concentration of 35 mg/L, which falls within the common range of elemental phosphorus required for growing lettuce.

What is hydroponic solution?

A Hydroponic solution, also known as hydroponic nutrient solution, is a specially formulated liquid mixture of nutrients that is used to grow plants hydroponically. Hydroponics is a method of growing plants in a soil-free medium, where the roots of the plants are suspended in a nutrient-rich solution.

To calculate the volume of 0.75 M KCl solution required to obtain 2.0 moles of the solute, we can use the formula:

moles = concentration x volume

Rearranging this formula, we get:

volume = moles / concentration

Substituting the given values, we get:

volume = 2.0 moles / 0.75 M

volume = 2.67 L

Therefore, you would need 2.67 liters of 0.75 M KCl solution to obtain 2.0 moles of the solute.

To know more about volume refer here

https://brainly.com/question/28058531#

#SPJ11

When a wave passes through water, the particles of water move in a circular motion, which is often described as an orbital motion.

The circular motion of water particles is created by the energy of the wave, which causes the water to oscillate up and down or back and forth in the same place.

As the wave moves through the water, the energy is transferred from particle to particle in a circular motion, causing the water to move in a wave pattern that travels outward from its source. This circular motion is why water waves do not carry water particles along with them, but rather simply transfer energy through the water.

This motion is also what creates the phenomena of waves breaking on shorelines, as the circular motion of water particles becomes disrupted by the shallow water and causes the wave to collapse.

To know more about circular motion refer to-

https://brainly.com/question/2285236

#SPJ11

In building a brand new city in America without using coal or gas, I would choose to use fission nuclear reactors over fusion nuclear reactors.

The reason behind choosing fission nuclear reactors is that they are currently more developed and widely used in practice than fusion nuclear reactors.

Fission reactors have proven their efficiency and safety in generating power for decades.

Fusion nuclear reactors, while having the potential for greater energy output and fewer radioactive waste issues, are still in the experimental stage and not yet commercially viable.

As a city planner, it's crucial to prioritize reliable and established energy sources for the city's needs. Therefore, using fission nuclear reactors would be a more feasible and practical choice for powering a new city in America.

To know more about nuclear fission visit:

https://brainly.com/question/29541275

#SPJ11

The mass of B1 is one-half of the total mass of the mixture before any salt or water is added.The mass of B1 is 1582.5 lbm.

Mixture is a combination of two or more substances that are not chemically combined. Mixtures can be either homogeneous, meaning the substances are uniformly dispersed, or heterogeneous, meaning the substances are not evenly distributed. Examples of mixtures include sand and water, sugar and water, and salt and pepper.

Since we are given that the total mass of the mixture is 3200 lbm and that 35 lbm of salt will be added, the total mass of the mixture before the salt and water are added is 3165 lbm.Since B2 is 4.5% salt, we can calculate the salt mass of B2 by multiplying 4.5 by the total mass of B2. Thus, the salt mass of B2 is 4.5 * 1582.5 lbm = 7162.5 lbm. Since we are given that 35 lbm of salt will be added, we can calculate the total mass of B2 before the salt and water are added by subtracting 35 lbm from 7162.5 lbm. Thus, the total mass of B2 before the salt and water are added is 7127.5 lbm. e B3 is 5.5% salt, we can calculate the salt mass of B3 by multiplying 5.5.

To learn more about mixture

https://brainly.com/question/24647756

#SPJ4

There are approximately 3.40 x 10²⁴ molecules in 9.44 moles of AlCl₃.

This is calculated by using Avogadro's number (6.022 x 10²³) and multiplying it by the number of moles given.


To calculate the number of molecules in a given amount of substance, we use Avogadro's number, which is 6.022 x 10²³. This number represents the number of particles (molecules, atoms, ions) in one mole of a substance.

In this case, we are given the number of moles of AlCl₃, which is 9.44. To calculate the number of molecules, we simply multiply the number of moles by Avogadro's number:

9.44 moles AlCl₃ x 6.022 x 10²³ molecules/mole = 3.40 x 10²⁴ molecules AlCl₃

Therefore, there are approximately 3.40 x 10²⁴ molecules in 9.44 moles of AlCl₃.

To know more about Avogadro's number click on below link:

https://brainly.com/question/28812626#

#SPJ11

To calculate the solubility of a gas when the pressure increases, the ideal gas law can be used. According to the law, the solubility of a gas is inversely proportional to pressure, meaning that as the pressure increases, the solubility decreases. T

herefore, if the pressure increases from 345 atm to 445 atm, the solubility will decrease.

Using the equation S1/P1 = S2/P2, the new solubility can be calculated. The equation can be rearranged to S2 = (S1 x P2) / P1. Plugging in the given values, the new solubility at 445 atm is 1.97 g/L. This is a decrease of 0.39 g/L.

In conclusion, when the pressure of a gas increases, its solubility decreases. Using the ideal gas law, the new solubility can be calculated using the equation S2 = (S1 x P2) / P1. In this case, the solubility of a gas decreased from 2.36 g/L to 1.97 g/L when the pressure increased from 345 atm to 445 atm.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The alpha decay of the isotope of the element produces lead-206 is the polonium (Po)- 210.

Alpha decay is the process, the alpha particles is the emitted when the heavier nuclei decays into the lighter nuclei. Then the  alpha particle released has the charge of the +2 units.

The representation of the alpha decay is as :

[tex]X^{A}{z} }[/tex] --->  Y⁴₂  +  α⁴₂

Y⁴₂  = Pb²⁰⁶₈₂

Z - 2 = 82

Z = 84

A - 4 = 206

A = 210

The atomic mass, A = 210

The atomic number, Z = 84

Therefore, the element is the polonium (Po) that has the atomic number is the 84 and the atomic mass is the 210.

To learn more about isotopes here

https://brainly.com/question/787643

#SPJ4

The ideal gas law states that the pressure of a gas is directly proportional to its temperature when held at a constant volume. This means that when the pressure is decreased, the temperature must also decrease.

To calculate the new temperature, use the equation P1/T1 = P2/T2, where P1 is the original pressure, T1 is the original temperature, P2 is the new pressure, and T2 is the new temperature.

Using the values given in the question, we get 1150/75.0 = 760/T2. Solving for T2, we get T2 = 49.6°C. Therefore, the final temperature of the gas is 49.6°C.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The correct answer is e. The concentrations of H2 and HI will decrease as the system is approaching equilibrium.

the equilibrium concentration of HI is 1.18 x 10^-4 M.

The correct answer is e. The concentrations of H2 and HI will decrease as the system is approaching equilibrium.

This is because the equilibrium constant, Kc, for the reaction is 64, which is a relatively large value. This suggests that the forward reaction (2HI → H2 + I2) is favored at equilibrium, meaning that the concentration of HI will decrease as the system approaches equilibrium.

To calculate the equilibrium concentration of HI, we can use the equilibrium constant expression:

Kc = [H2][I2]/[HI]^2

Substituting the given values, we get:

64 = (4.2 x 10^-4)(1.9 x 10^-3)/[HI]^2

Solving for [HI], we get:

[HI] = sqrt((4.2 x 10^-4)(1.9 x 10^-3)/64) = 1.18 x 10^-4 M

Therefore, the equilibrium concentration of HI is 1.18 x 10^-4 M.
Visit to know more about equilibrium:-

https://brainly.com/question/517289

#SPJ11

The addition of more [tex]SO2[/tex] to the reaction at equilibrium, [tex]2 SO2(g) + O2(g) ↔ 2 SO3(g) + heat[/tex], will increase the rate of the forward reaction. This is because the forward reaction is an exothermic reaction, meaning it releases heat. The correct answer is option d.

According to Le Chatelier's principle, adding more [tex]SO2[/tex] will shift the equilibrium position to the right and favor the forward reaction, leading to an increase in the concentration of the products, [tex]SO3[/tex].

As the concentration of [tex]SO3[/tex] increases, the rate of the forward reaction will increase due to an increase in the number of molecular collisions between reactants. Therefore, adding more[tex]SO2[/tex] will increase the rate of the forward reaction, favoring the production of [tex]SO3[/tex].

The correct answer is option d.

To know more about Le Chatelier's principle refer to-

https://brainly.com/question/29009512

#SPJ11

The mass of chlorine needed to react with 0.175 g of gold is 94.52 mg.

The balanced chemical reaction is :
2 Au + 3 Cl₂ → 2 AuCl₃

Relative atomic masses: Cl = 35.5 and Au = 197

Converting the mass of gold to moles:
0.175 g Au * (1 mol Au / 197 g Au) = 0.00088756 mol Au

The number of moles of Cl₂ needed to react with the gold is:
=0.00088756 mol Au * (3 mol Cl₂ / 2 mol Au) = 0.00133134 mol Cl₂

Converting the moles of Cl₂ to grams:
=0.00133134 mol Cl₂ * (2 x 35.5 g Cl₂ / 1 mol Cl₂) = 0.09452 g Cl₂

Converting the mass of Cl₂ from grams to milligrams:
=0.09452 g Cl₂ * (1000 mg / 1 g) = 94.52 mg Cl₂

Therefore, the mass of chlorine needed to react with 0.175 g of gold is approximately 94.52 mg.

To learn more about moles visit:

https://brainly.com/question/24191825

#SPJ11

The age of the rock is approximately 2.6 billion years.

The fact that the rock contains one-fourth of its original amount of potassium-40 means that three-quarters of the original potassium-40 has decayed.

Since the half-life of potassium-40 is 1.3 billion years, this means that the rock has gone through two half-lives of decay.

To calculate the age of the rock, we can use the following formula:

age = number of half-lives x half-life

In this case, the number of half-lives is 2 and the half-life is 1.3 billion years. Plugging these values into the formula, we get:

age = 2 x 1.3 billion years

age = 2.6 billion years

to know more about age of the rock refer here:

https://brainly.com/question/31257496#

#SPJ11

Identifying areas with widespread precipitation and locating a weather front. Since you haven't provided a specific map or image, how to approach these tasks using the given terms.

Part C: To identify areas with the most widespread precipitation, look for large patches of color on a weather map or satellite image. These colors typically represent different levels of precipitation intensity. The most widespread precipitation will be in areas where these colored patches cover a large geographic region.

Part D: To locate a weather front, look for a line of precipitation on the map or image. This line often represents a boundary between two air masses with different temperatures and humidity levels. To determine the front's direction, you can observe the movement of the line over time, either by analyzing a series of images or by referring to weather forecasts. The front will typically move in the direction that the air masses are being pushed by prevailing winds.

Please refer to a specific weather map or satellite image and apply these steps to find the areas with widespread precipitation and the location and direction of a weather front.

To know more about widespread precipitation :

https://brainly.com/question/28140571

#SPJ11

111900g  is the weight of an object that has the area of 74.6 m² and exerts a pressure of 1500 N/m².

Weight being a force The SI unit for weight is Newton (N), which also happens to be the same as the SI unit for force. When we look at how weight is expressed, we can see how it depends on both mass as well as the acceleration caused by gravity; while the mass might not vary from one location to another, the acceleration caused by gravity does.

Pressure = thrust/ area

              = weight/ area

1500  = weight/ 74.6

weight = 111900g

To know more about weight, here:

https://brainly.com/question/30176113

#SPJ1

The strength of bonds formed and broken depends on the specific chemical reaction involved. In some reactions, the bonds formed are stronger than the bonds broken, while in other reactions, the opposite is true.

When a chemical reaction is exothermic, meaning that it releases energy, the bonds formed are typically stronger than the bonds broken. This is because energy is released when the bonds are formed, indicating that they are more stable and stronger than the bonds that were broken.

On the other hand, in an endothermic reaction, meaning that it absorbs energy, the bonds broken are usually stronger than the bonds formed. This is because energy is required to break the existing bonds, indicating that they are stronger and more stable than the new bonds that are formed.

To know more about chemical reaction, refer here:

https://brainly.com/question/29762834#

#SPJ11

A 0.625 g sample of unknown weak acid is titrated with 0.1 M NaOH. So, the molecular mass of the unknown acid is 139.0 g/mol. The pKa of the unknown acid is 8.25.

Here are the step by step solutions for the given question:

(a) To determine the molecular mass of the unknown acid, we need to first find the number of moles of NaOH used in the titration. From the concentration and volume of NaOH used, we have:

0.100 mol/L x 0.045 L = 0.0045 mol NaOH

Since the acid and base react in a 1:1 ratio, we know that the number of moles of acid in the sample is also 0.0045 mol. Using the mass of the sample and the number of moles of acid, we can find the molecular mass:

Molecular mass = mass/number of moles = 0.625 g / 0.0045 mol = 139.0 g/mol

Therefore, the molecular mass of the unknown acid is 139.0 g/mol.

(b) At the equivalence point, the number of moles of NaOH added is equal to the number of moles of acid originally present in the sample. Therefore, we can use the concentration of the NaOH solution and the volume of NaOH used to calculate the initial concentration of the acid, [HA]:

0.100 mol/L x 0.045 L = 0.0045 mol NaOH

0.0045 mol NaOH = 0.0045 mol HA

[HA] = 0.0045 mol / 0.025 L = 0.18 mol/L

Next, we can use the Henderson-Hasselbalch equation to find the pKa of the acid:

pKa = pH + log([A-]/[HA])

At the equivalence point, all of the acid has been converted to its conjugate base, so [A-] = [HA]. We can assume that the pH at the equivalence point is equal to the pKa of the acid. Substituting these values into the Henderson-Hasselbalch equation:

8.25 = pKa + log(1)

pKa = 8.25

Therefore, the pKa of the unknown acid is 8.25.

To know more about the equivalence point refer here :

https://brainly.com/question/31671460#

#SPJ11

The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.

The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.

In the first part of the experiment, the reagents used are benzidine and hydrogen peroxide, which react to form a compound called a dianion. This dianion is initially colorless, but when sodium hydroxide is added, it causes the dianion to undergo a rearrangement that forms a resonance-stabilized conjugated ring. This conjugated ring absorbs visible light in the blue-green range, which causes the solution to appear red. This color change is used as an indicator for the presence of blood in forensic and medical labs because benzidine and its derivatives are known to react with the heme group found in blood to form a similar colored proproductduct.
Visit to know more about conjugated ring:-

https://brainly.com/question/15047805

#SPJ11

The volume of the gas-filled balloon at STP would be 36.7 L.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P1V1)/T1 = (P2V2)/T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

At STP (standard temperature and pressure), the temperature is 273 K and the pressure is 1 atm. So we have:

(P1V1)/T1 = (P2V2)/T2

(1.5 atm x 30.0 L)/313 K = (1 atm x V2)/273 K

Solving for V2:

V2 = (1.5 atm x 30.0 L x 273 K)/(1 atm x 313 K)

V2 = 36.7 L

Therefore, the volume of the gas-filled balloon at STP would be 36.7 L.

To know more about combined gas law refer to-

https://brainly.com/question/27009857

#SPJ11

The amount of pressure on the sample of gas after compression is 4.67 atm.

The initial volume and pressure of the gas are 14 m³ and 3.0 atm, respectively. After the gas is compressed, its volume becomes 9.0 m³. We can use the combined gas law to determine the final pressure of the gas:

[tex]P_1V_1 / T_1 = P_2V_2 / T_2[/tex]

where[tex]P_1, V_1,\ and\ T_1[/tex]are the Initial pressure, volume, and temperature of the gas, respectively, and [tex]P_2, V_2,\ and\ T_2[/tex] are the final pressure, volume, and temperature of the gas, respectively.

Assuming the temperature is constant, we can simplify the equation to:

[tex]P_2 = (P_1 * V_1) / V_2[/tex]

Substituting the given values, we get:

[tex]P_2[/tex] = (3.0 atm * 14 m³) / 9.0 m³

[tex]P_2[/tex]= 4.67 atm

To know more about Initial volume, here

brainly.com/question/2454734

#SPJ4

The concentration of arsenic in the water is 12 ppm, which is higher than the legal limit of 0.05 ppm, the sample of drinking water is not within the legal limit for arsenic. Therefore, action needs to be taken to reduce the level of arsenic in the water to make it safe for drinking.

The concentration of arsenic in the water can be calculated as follows:

Concentration (ppm) = (Mass of arsenic / Mass of water) x 1,000,000

In this case, the mass of arsenic is 0.0012 grams and the mass of water is 100 grams. Substituting these values into the formula, we get:

Concentration (ppm) = (0.0012 g / 100 g) x 1,000,000

Concentration (ppm) = 12 ppm

To know more about arsenic, here

brainly.com/question/493434

#SPJ1

the concentration of sulfate ion when the precipitation of barium sulfate begins is 1.07×10^-8 M.

To determine the formula of the substance that precipitates first, we need to determine which combination of ions will form an insoluble compound first. We can do this by considering the solubility rules for common ionic compounds.

Calcium acetate dissociates into Ca2+ and CH3COO- ions in solution, while barium nitrate dissociates into Ba2+ and NO3- ions. Ammonium sulfate, when added to the solution, will dissociate into NH4+ and SO42- ions.

The possible combinations of ions that can form insoluble compounds are:

- Ca2+ and SO42- form CaSO4, which is insoluble
- Ba2+ and SO42- form BaSO4, which is insoluble

According to the solubility rules, calcium sulfate (CaSO4) is slightly soluble in water, while barium sulfate (BaSO4) is insoluble. Therefore, the substance that precipitates first is barium sulfate (BaSO4).

To determine the concentration of sulfate ion when the precipitation first begins, we need to calculate the product of the concentrations of barium ion and sulfate ion, and compare it to the solubility product constant (Ksp) for barium sulfate.

The balanced chemical equation for the precipitation reaction is:

Ba(NO3)2 + (NH4)2SO4 → BaSO4↓ + 2NH4NO3

The Ksp expression for barium sulfate is:

Ksp = [Ba2+][SO42-]

At the point when precipitation begins, the barium and sulfate ion concentrations will be equal to each other, so we can use the concentration of barium ion to calculate the concentration of sulfate ion:

[Ba2+] = 1.03×10^-2 M

Ksp for barium sulfate is 1.1×10^-10 at 25°C.

Therefore, we can calculate the concentration of sulfate ion:

Ksp = [Ba2+][SO42-]

1.1×10^-10 = (1.03×10^-2 M)([SO42-])

[SO42-] = 1.07×10^-8 M

Therefore, the concentration of sulfate ion when the precipitation of barium sulfate begins is 1.07×10^-8 M.
Visit to know more about precipitation:-

https://brainly.com/question/14330965

#SPJ11

The equation for the dissociation of benzoic acid is:

C6H5COOH + H2O ↔ C6H5COO- + H3O+

The expression for Ka is:

Ka = [C6H5COO-][H3O+] / [C6H5COOH]

At equilibrium, the concentration of undissociated benzoic acid will be (0.35 - x), where x is the concentration of dissociated benzoic acid.

Assuming x is small compared to 0.35, we can make the approximation that the concentration of undissociated benzoic acid is 0.35. Therefore, we can write:

Ka = x^2 / (0.35 - x)

Solving for x, we get:

x = √(Ka × (0.35 - x))

x = √(6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x)

Squaring both sides:

x^2 = 6.3 × 10^-5 × 0.35 - 6.3 × 10^-5 × x

Bringing all the x terms to one side:

x^2 + 6.3 × 10^-5 × x - 6.3 × 10^-5 × 0.35 = 0

Using the quadratic formula:

x = [-6.3 × 10^-5 ± √(6.3 × 10^-5)^2 + 4 × 6.3 × 10^-5 × 0.35] / 2

x = [-6.3 × 10^-5 ± 1.37 × 10^-3] / 2

x = 6.46 × 10^-4 or x = -7.03 × 10^-5

Since the concentration of benzoic acid cannot be negative, we choose the positive root:

x = 6.46 × 10^-4

The concentration of H3O+ ions is equal to x, so the pH of the solution is:

pH = -log[H3O+]

pH = -log(6.46 × 10^-4)

pH = 3.19

Therefore, the pH of a 0.35 m solution of benzoic acid is 3.19.

To know more about dissociation refer here

https://brainly.com/question/28330679#

#SPJ11

Answer:

Mechanical energy is the total amount of kinetic energy and potential energy of an object.

It can also be defined as the energy of an object due to either its motion or position or both.

Hope this helps!

pls like and mark as brainliest!

Answer:

Energy possessed by a machine.

Answer:

An acid

Explanation:

a metal oxide e.g NaOH +an acid e.g HCl=>salt e.g NaCl+water

According to the question the mass of Ag₂S produced is 0.063 g.

Mass is a measure of the amount of matter an object contains. It is usually measured in kilograms and grams, and is an important concept in physics and chemistry. Mass is related to other properties such as weight, density, and momentum. Mass can be determined either by measuring the object's weight in a gravitational field or by measuring its inertia, which is its resistance to acceleration caused by a force.

The amount of Ag₂S produced can be calculated using the molar ratio of the reactants and products in the equation: 4Ag + 2 H₂S + O2 → 2 Ag₂S + 2 H₂O
First, calculate the amount of each reactant in moles:
Ag: 0.950 g / 107.87 g/mol = 0.00877 mol
H₂S: 0.140 g / 34.08 g/mol = 0.0041 mol
O2: 0.08000 g / 32.00 g/mol = 0.0025 mol
Then, use the molar ratio to calculate the amount of Ag2S produced:
2 Ag₂S = 0.00877 mol x (2 mol Ag₂S/4 mol Ag) = 0.0044 mol
Therefore, the mass of Ag₂S produced is 0.0044 mol x 143.7 g/mol = 0.063 g.

To learn more about mass
https://brainly.com/question/837939
#SPJ4

The mass of [tex]Ag_2S[/tex] obtained from the given mixture is 1.015 g.

The given chemical equation shows that 4 moles of Ag react with 2 moles of [tex]H_2S[/tex] and 1 mole of [tex]O_2[/tex] to form 2 moles of [tex]Ag_2S[/tex] and 2 moles of [tex]H_2O[/tex].

To determine the mass of [tex]Ag_2S[/tex] produced, we need to find out the limiting reactant first. The limiting reactant is the reactant that is completely consumed during the reaction and limits the amount of product that can be formed.

We can find the limiting reactant by calculating the amount of product that can be formed from each reactant.

For Ag:

The molar mass of Ag is 107.87 g/mol. The number of moles of Ag present is:

0.950 g / 107.87 g/mol = 0.00880 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00880 mol of Ag is:

0.00880 mol Ag x (2 mol [tex]Ag_2S[/tex] / 4 mol Ag) = 0.00440 mol [tex]Ag_2S[/tex]

For [tex]H_2S[/tex]:

The molar mass of [tex]H_2S[/tex] is 34.08 g/mol. The number of moles of [tex]H_2S[/tex] present is:

0.140 g / 34.08 g/mol = 0.00410 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00410 mol of [tex]H_2S[/tex] is:

0.00410 mol [tex]H_2S[/tex] x (2 mol [tex]Ag_2S[/tex] / 2 mol [tex]H_2S[/tex]) = 0.00410 mol [tex]Ag_2S[/tex]

For [tex]O_2[/tex]:

The molar mass of [tex]O_2[/tex] is 32.00 g/mol. The number of moles of [tex]O_2[/tex] present is:

0.08000 g / 32.00 g/mol = 0.00250 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00250 mol of [tex]O_2[/tex] is:

0.00250 mol [tex]O_2[/tex] x (2 mol [tex]Ag_2S[/tex] / 1 mol O2) = 0.00500 mol [tex]Ag_2S[/tex]

From the above calculations, we can see that the amount of [tex]Ag_2S[/tex] that can be formed from Ag is 0.00440 mol, from [tex]H_2S[/tex] is 0.00410 mol, and from [tex]O_2[/tex] is 0.00500 mol.

Since the smallest amount of [tex]Ag_2S[/tex] that can be formed is from [tex]H_2S[/tex], it is the limiting reactant. Therefore, the amount of [tex]Ag_2S[/tex] that can be formed is 0.00410 mol.

The molar mass of [tex]Ag_2S[/tex] is 247.80 g/mol. Therefore, the mass of [tex]Ag_2S[/tex] that can be formed is:

0.00410 mol [tex]Ag_2S[/tex] x 247.80 g/mol = 1.015 g [tex]Ag_2S[/tex] (rounded to three significant figures)

To learn more about mass

https://brainly.com/question/19694949

#SPJ4

Complete question:

What is the mass of Ag2S obtained from a mixture of 0.950 g Ag, 0.140 g of H2S, and 0.08000 g O2, according to the reaction 4Ag + 2H2S + O2 → 2Ag2S + 2H2O?

All else being equal, a reaction with a higher activation energy will have a slower reaction rate compared to one with a lower activation energy.

Activation energy refers to the minimum amount of energy required for a chemical reaction to occur. The higher the activation energy, the more energy is required to initiate the reaction, and thus the slower the reaction rate.

This is because a higher activation energy means that fewer reactant molecules will have enough energy to overcome the energy barrier and form products. Therefore, reactions with higher activation energies require more energy input to proceed and will typically have a slower reaction rate than those with lower activation energies.

To know more about the Activation energy, here

https://brainly.com/question/29016918

#SPJ4