what is the pH if the pOH is 14

True, variations can be subtle or extreme.

The degree of variation depends on the context and the nature of the subject being examined. Some variations may be slight and difficult to detect, while others may be extreme and easily identifiable. Regardless of the extent of the variation, it is an essential concept that allows for diversity and creativity in various fields.

This is because variations refer to differences or changes in something. For instance, in genetics, variations can range from small changes in the genetic code to large-scale mutations that alter the entire genetic sequence. Similarly, in language, variations can be subtle, such as different pronunciations or word usage, or extreme, such as different languages altogether.

In other areas such as art, variations can also be subtle or extreme. For example, an artist may create variations of a painting by changing the color scheme, brushstrokes, or composition, resulting in subtle differences. Alternatively, an artist may create an extreme variation by creating a completely different piece that only shares a few similarities with the original.

For more such questions on variations

https://brainly.com/question/20126690

#SPJ11

1.5 mole of Ca(OH)[tex]_2[/tex]  are needed to neutralize 2 moles of HCI.  The mole idea is a useful way to indicate how much of a substance there is.

The mole idea is a useful way to indicate how much of a substance there is. Any measurement can be divided into two components: the magnitude in numbers and the units in which the magnitude is expressed. For instance, the magnitude is "2" and the unit is "kilogramme" when a ball's mass is determined to be 2 kilogrammes.

Ca(OH)[tex]_2[/tex] + 2HCl → CaCl[tex]_2[/tex] + 2H[tex]_2[/tex]O

1 mole of Ca(OH)[tex]_2[/tex]  are needed to neutralize 2 moles of HCI.

so, 1.5 mole of Ca(OH)[tex]_2[/tex]  are needed to neutralize 2 moles of HCI.

To know more about mole, here:

https://brainly.com/question/31597231

#SPJ1

1. The number of moles that are contained in 890 ml at 21.0 °C and 750.0 mm Hg pressure is 0.0368 moles

The ideal gas law states

PV = nRT

where P is the pressure

V is the volume

n is the number of moles

R is the gas constant

T is the temperature

Given:

P = 760 mmHg

760 mmHg = 1 atm

P = 1 atm

T = 21° C = 21+273 K = 294 K

V = 890 ml = 0.89 L

Putting them in ideal gas law,

1 * 0.89 = n * 0.0821 * 294

n = 0.0368

2.  The pressure of the container containing 1.09 g of H in a 2.00 L container at 20.0 °C is 6.55 atm

V = 2 L

n = 1.09/2 = 0.545

T = 20 + 273 K = 293 K

Putting them in ideal gas law,

P * 2 = 0.545 * 0.0821 * 293

P = 6.55 atm

3. The volume of 3.00 moles of gas will occupy at 24.0 °C and 762.4 mm Hg is 72.93 L

P = 762.4 mmHg

P = 1.003 atm

n = 3 moles

T = 24 + 273 K = 297 K

Putting them in ideal gas law,

V * 1.003 = 3 * 0.0821 * 297

V = 72.93 L

4. The volume of 20 g of Argon at STP is 11.2 L

P = 1 atm

T = 273 K

n = 20/40 = 0.5

Putting them in ideal gas law,

V * 1 = 0.5 * 0.0821 * 273

V = 11.2 L

5. The number of moles of gas that would be present in a gas trapped within a 100.0 mL vessel at 25.0 °C is 0.01

V = 100 ml = 0.1 L

T = 25 + 273 = 298 K

P = 2.5 atm

Thus, 2.5 * 0.1 = n * 0.0821 * 298

n = 0.01

6. The moles of gas that would be present in a gas trapped within a 37.0-liter vessel at 80.00 °C at a pressure of 2.50 atm is 3.19 moles

P = 2.5 atm

T = 80 + 273 K = 353 K

V = 37 L

Thus, 2.5 * 37 = 0.0821 * n * 353

n = 3.19

7. The volume will increase if the number of moles of a gas is doubled, at the same temperature and pressure

Keeping the temperature and pressure constant in the gas law we get,

V ∝ n

Thus, the volume is directly proportional to number of moles in this case.

8. The volume occupied by 1.27 moles of helium gas at STP is 28.46 L

P = 1 atm

T = 273 K

n = 1.27

Putting them in ideal gas law,

V * 1 = 1.27 * 0.0821 * 273

V = 28.46 L

9. At pressure 0.415 atm, 0.150 moles of nitrogen gas at 23.0 °C occupy 8.90 L

V = 8.9 L

T = 23 + 273 K = 300 K

n = 0.15 moles

Thus, P * 8.9 = 0.0821 * 0.15 * 300

P = 0.415 atm

10. The volume occupied by 32g of NO at 3.12 atm and 18.0 °C is 8.11 L

n = 32/30 = 1.06

P = 3.12 atm

T = 273 + 18 K = 291 K

Thus, 3.12 * V = 1.06 * 0.0821 * 291

V = 8.11 L

Learn more about Ideal Gas Law:

https://brainly.com/question/27870704

#SPJ1

The mass (in grams) of sodium carbonate, Na₂CO₃ needed to react completely with 25 mL of vinegar is 1.17 grams

First, we shall obtain the mole in 25 mL of vinegar, HC₂H₃O₂

Mole = molarity × volume

Mole of HC₂H₃O₂ = 0.875 × 0.025

Mole of HC₂H₃O₂ = 0.022 mole

Next, we shall determine the mole of sodium carbonate, Na₂CO₃ that react. Details below:

Na₂CO₃ + 2HC₂H₃O₂ -> 2NaC₂H₃O₂ + CO₂ + H₂O

From the balanced equation above,

2 moles of HC₂H₃O₂ reacted with 1 mole of Na₂CO₃

Therefore,

0.022 mole of HC₂H₃O₂ will react with = 0.022 / 2 = 0.011 mole of Na₂CO₃

Finally, we shall determine the mass of Na₂CO₃ needed. Details below:

Mass = Mole × molar mass

Mass of Na₂CO₃ = 0.011 × 106

Mass of Na₂CO₃ = 1.17 grams

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

The compound with the highest boiling point would be water, because of its strong hydrogen bonds between molecules.

Hydrogen bonding occurs when a hydrogen atom is covalently bonded to an electronegative atom, such as oxygen or nitrogen.

In water, each molecule is capable of forming four hydrogen bonds, leading to a strong intermolecular force that requires a large amount of energy to overcome. This results in a higher boiling point compared to ammonia, ethanol, and ethane, which do not exhibit hydrogen bonding to the same extent.

The statement that ammonia has a low density that reduces heat transfer and that ethanol has a high molecular mass that reduces kinetic energy are not relevant to the comparison of boiling points between these compounds.

To know more about hydrogen bonds refer to-

https://brainly.com/question/30885458

#SPJ11

To determine the number of carbon atoms in 0.008 moles of C3H7OH, we first need to find the molar mass of the compound.

The molar mass of C3H7OH can be calculated by adding the atomic masses of all the atoms in the molecule:

3(12.011) + 8(1.008) + 1(15.999) = 60.096 g/mol

This means that 1 mole of C3H7OH has a mass of 60.096 g.

To calculate the number of moles of carbon atoms in 0.008 moles of C3H7OH, we need to multiply the number of moles of C3H7OH by the number of carbon atoms in one mole of C3H7OH.

One mole of C3H7OH contains 3 carbon atoms, so 0.008 moles of C3H7OH contains:

0.008 moles x 3 = 0.024 moles of carbon atoms

Finally, we can convert moles of carbon atoms to the number of carbon atoms using Avogadro's number, which is 6.022 x 10^23 atoms per mole:

0.024 moles x 6.022 x 10^23 atoms/mole = 1.445 x 10^22 atoms of carbon

Therefore, 0.008 moles of C3H7OH contains 1.445 x 10^22 atoms of carbon.

To learn more about propanol, click here:  https://brainly.com/question/30909638

#SPJ11

The fact that the rate of the reaction between NO₂ and CO is independent of [CO] does not necessarily mean that CO is a catalyst for the reaction.

A catalyst is a substance that increases the rate of a reaction without being consumed in the reaction itself. In this case, if CO were a catalyst, it would be expected that the rate of the reaction would increase with increasing CO concentration. However, the fact that the rate of the reaction is independent of [CO] suggests that CO is not acting as a catalyst.

Instead, this result suggests that the reaction is not dependent on the concentration of CO, and that the reaction is likely to be a second-order reaction with respect to NO₂. This means that the rate of the reaction is determined by the concentrations of both NO₂ and CO, but the rate is not affected by the concentration of CO itself. Therefore, CO is not acting as a catalyst in this reaction.

To know more about the Reaction, here

https://brainly.com/question/13196831

#SPJ4

These problems involve acid-base neutralization and require stoichiometry calculations using the balanced chemical equation to determine the volume of one solution needed to neutralize another.

Step by step answers to the given questions are as follows :

1. To neutralize 25.0 ml of 0.150 M NaOH, we need the same number of moles of HCl.

Number of moles of NaOH = 0.150 mol/L x 0.0250 L = 0.00375 mol

Number of moles of HCl needed = 0.00375 mol

Concentration of HCl = 0.200 M

Volume of HCl needed = 0.00375 mol / 0.200 mol/L = 0.0188 L or 18.8 mL.

2. H₂SO₄ reacts with NaOH in a 1:2 ratio.

Number of moles of H₂SO₄ = 0.220 mol/L x 0.0350 L = 0.00770 mol

Number of moles of NaOH needed = 2 x 0.00770 mol = 0.0154 mol

Concentration of NaOH = 1.00 M

Volume of NaOH needed = 0.0154 mol / 1.00 mol/L = 0.0154 L or 15.4 mL.

3. H₃PO₄ reacts with NaOH in a 1:3 ratio.

Number of moles of H₃PO₄ = 0.143 mol/L x 0.0100 L = 0.00143 mol

Number of moles of NaOH needed = 3 x 0.00143 mol = 0.00429 mol

Concentration of NaOH = 1.00 M

Volume of NaOH needed = 0.00429 mol / 1.00 mol/L = 0.00429 L or 4.29 mL.

4. Ca(OH)₂ reacts with HCl in a 1:2 ratio.

Number of moles of HCl = 0.400 mol/L x 0.0450 L = 0.0180 mol

Number of moles of Ca(OH)₂ needed = 0.00900 mol

Molar mass of Ca(OH)₂ = 74.10 g/mol

Mass of Ca(OH)₂ needed = 0.00900 mol x 74.10 g/mol = 0.667 g

Concentration of Ca(OH)₂ = 1.000 M

Volume of Ca(OH)₂ needed = 0.00900 mol / 1.000 mol/L = 0.00900 L or 9.00 mL.

5. H₃PO₄ has three acidic hydrogens and each reacts with one H+ ion.

Number of moles of HCl = 0.800 mol/L x 0.0612 L = 0.0489 mol

Number of moles of H+ ions in HCl = 0.0489 mol

Number of moles of H+ ions needed = 3 x 0.0489 mol = 0.1467 mol

Concentration of H₃PO₄= 0.204 M

Volume of H₃PO₄ needed = 0.1467 mol / 0.204 mol/L = 0.719 L or 719 mL.

To know more about the acid-base neutralization refer here :

https://brainly.com/question/31591186#

#SPJ11

The reaction did not produce as much as expected based on the theoretical yield. However, the percentage yield can be calculated by dividing the actual yield by the theoretical yield and multiplying by 100, which gives a value of 53.75%.

According to the balanced equation, the theoretical yield of water produced from the combustion of 20 grams of methane is 80 grams. This is calculated by first finding the moles of methane used (20g / 16.04 g/mol = 1.247 mol) and then using the stoichiometric ratio to determine the moles of water produced (2 moles of H2O for every 1 mole of CH4), which gives 2.494 mol of water. Finally, converting the moles of water to grams gives a theoretical yield of 80 grams.

However, the actual yield of water obtained from the reaction was only 43 grams, which is significantly less than the theoretical yield. This could be due to a variety of reasons, such as incomplete combustion of methane, loss of product during collection or transfer, or errors in measurement or calculation.

For more such questions on reaction

https://brainly.com/question/29470602

#SPJ11

The volume of the gas at 561.06 K and 70.3 atm will be 168.08 L.

The initial conditions of the gas are given as P₁ = 15.17 atm, V₁ = 641.68 L, and T₁ = 243.41 K. To find the volume of the gas at the new conditions, we can use the combined gas law:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₂, V₂, and T₂ are the new pressure, volume, and temperature, respectively.

We can rearrange the equation to solve for V₂:

V₂ = (P₂/P₁) x (T₁/T₂) x V₁

Substituting the given values:

V₂ = (70.3/15.17) x (243.41/561.06) x 641.68

V₂ = 168.08 L

To know more about combined gas law, refer here:

https://brainly.com/question/30458409#

#SPJ11

The landform that is a result of the chemical weathering of carbonate rock is

While the chemical weathering of carbonate rock does occur, it can result in voids or cavities under the surface. When sedimentary layers become unstable and unable to support their own weight, a concave impression known as a sinkhole will form.

Sinkholes are prevalent in areas that have an ample supply of carbonate rock, which itself poses a danger due to its potential impact on infrastructure and human well-being. It is important to note that the chemical deterioration of carbonate rock does not typically contribute to natural developments like mountains, dunes, or rivers.

Learn more about Sinkholes at

https://brainly.com/question/1856979

#SPJ1

The name of this compound using IUPAC rules is  3,4-dimethylhexane.

Option D is correct.

the IUPAC nomenclature of organic chemistry is described as a method of naming organic chemical compounds as recommended by the International Union of Pure and Applied Chemistry.

Option A, 2,3-diethylbutane, is incorrect because it has a different carbon chain length and different substituent positions.

Option B, 2-ethyl-3-methylpentane, is incorrect because it has a different carbon chain length and one of the substituents is incorrectly placed.

Option C, 3-methyl-4-ethylpentane, is incorrect because it has a different carbon chain length and the substituent positions are reversed.

Learn more about  IUPAC rules at: https://brainly.com/question/28872356

#SPJ1

Approximately 0.0397 grams of reactant will produce 1370 J of heat in this chemical reaction.

To calculate the mass of reactant needed to produce 1370 J of heat in a chemical reaction that releases 34.5 kJ/g of heat for each gram of reactant consumed, follow these steps:

Step 1: Convert the given energy value from kJ/g to J/g.
1 kJ = 1000 J
So, 34.5 kJ/g = 34.5 * 1000 J/g = 34,500 J/g

Step 2: Use the energy conversion factor to determine the mass of reactant.
We know that 34,500 J of heat is released for every 1 gram of reactant consumed. We need to calculate the mass of reactant required to produce 1370 J of heat.

Step 3: Set up a proportion.
Let "m" represent the mass of reactant needed to produce 1370 J of heat. We can set up a proportion like this:

(34,500 J/g) / (1 g) = (1370 J) / (m)

Step 4: Solve for the mass of reactant "m".
To solve for "m", multiply both sides by "m" and then divide both sides by 34,500 J/g:

m = (1370 J) / (34,500 J/g)

Step 5: Calculate the value of "m".
m = 0.0397 g

Therefore, approximately 0.0397 grams of reactant will produce 1370 J of heat in this chemical reaction.

To know more about chemical reaction, visit:

https://brainly.com/question/29039149#

#SPJ11

Calcium carbonate is dissolved by acidic groundwater, creating limestone caves. It is possible for the rate of chemical reactions to accelerate when the temperature of limestone rock in a cave rises.

This could speed up the decomposition of calcium carbonate, which would speed up the creation of caves. The reverse outcome, though, is also possible because a rise in temperature can also make the water in the cave evaporate, which can cause calcium carbonate to precipitate and give rise to stalactites, stalagmites, and other structures. The balance between dissolution and precipitation reactions, and how these are altered, determine how temperature affects cave development.

To know more about Calcium carbonate, here

brainly.com/question/13565765

#SPJ1

First, remove the snow using shovels or snow blowers, and then apply a deicing agent to prevent ice formation and improve traction on surfaces.

To determine the best response strategy for dealing with heavy wet snow with 1 1/2-inch (3.75 cm) of accumulation, consider the following terms:

1. Snow removal: Clearing snow from surfaces like roads, sidewalks, and driveways using shovels, snow blowers, or plows. In this case, snow removal may be necessary to maintain safety and accessibility.

2. Deicing: Applying deicing agents, such as salt or other chemicals, to surfaces to prevent ice formation and improve traction. For a heavy wet snow of 1 1/2-inch, deicing might be beneficial for slippery areas or those prone to refreezing.

3. Anti-icing: Pre-treating surfaces with chemicals before snowfall to prevent ice bonding and facilitate easier removal. Given the snow accumulation, anti-icing may not be the most efficient strategy.

The best response strategy for a heavy wet snow with 1 1/2-inch (3.75 cm) of accumulation would be a combination of snow removal and deicing. First, remove the snow using shovels or snow blowers, and then apply a deicing agent to prevent ice formation and improve traction on surfaces.

To know more about deicing agent refer here: https://brainly.com/question/28341775#

#SPJ11

3.80 mol of O₂ oxygen will produce 1.90 mol of CO₂ carbon dioxide.

According to the balanced chemical equation for the combustion of methane:

CH₄ + 2O₂ ⇒ CO₂ + 2H₂O

In this equation, we can see that 1 mole of CH₄ reacts with 2 moles of O₂ oxygen to produce 1 mole of CO₂ carbon dioxide and 2 moles of H₂O. This means that for every 2 moles of O₂ used, 1 mole of CO₂ is produced.

To determine how many moles of CO₂ will be produced by 3.80 mol of O₂, we can use a proportion. We set up the proportion with the given amount of O₂ and the conversion factor derived from the balanced chemical equation:

3.80 mol O₂ × 1 mol CO₂ ÷ 2 mol O₂ = x mol CO₂

Simplifying the proportion, we can solve for x:

x = 3.80 mol O₂ × 1 mol CO₂ ÷ 2 mol O₂

x = 1.90 mol CO₂

To learn more about oxygen follow the link:

https://brainly.com/question/13370320

#SPJ4

The mass in micrograms of 5. 00 scruples approximately 149,166.67 µg.

The known values are: 1 scruple = 20 grains, 1 ounce = 480 grains, and 1 oz = 28.34 g.

To find the mass of 5.00 scruples, first convert scruples to grains by multiplying by 20, then convert grains to ounces by dividing by 480, and finally convert ounces to grams by multiplying by 28.34.

The calculation is as follows:

5.00 scruples x 20 grains/scruple x 1 ounce/480 grains x 28.34 g/1 oz x 1,000,000 µg/1 g = 149,166.67 µg

Therefore, the mass of 5.00 scruples is 149,166.67 µg.

To know more about the micrograms refer here :

https://brainly.com/question/13264213#

#SPJ11

Phospholipids will form a sheet-shaped double layer when placed in water. The correct answer is option c.

This is known as a phospholipid bilayer, which is a fundamental component of cell membranes.

The hydrophilic (water-loving) phosphate heads of the phospholipids face outwards and interact with the water molecules, while the hydrophobic (water-fearing) fatty acid tails face inwards and interact with each other.

The phospholipid bilayer provides a selectively permeable barrier that allows certain substances to pass through the membrane while preventing others from doing so.

Additionally, the fluidity of the phospholipid bilayer can be regulated by various factors, such as temperature and the presence of cholesterol, allowing for optimal membrane function in different cellular environments.

The correct answer is option c.

To know more about Phospholipids refer to-

https://brainly.com/question/14949280

#SPJ11

Complete Question

What will phospholipids form when placed in water?

a. a sphere-shaped single layer

b. a sphere-shaped double layer

c. a sheet-shaped double layer

d. a sheet-shaped single laye

The Arrhenius equation describes the relationship between the rate constant (k) of a chemical reaction and the temperature (T) at which the reaction occurs. The equation is given as:

k = Ae^(-Ea/RT)

where A is the pre-exponential factor or frequency factor, Ea is the activation energy required for the reaction to occur, R is the gas constant, and e is the base of the natural logarithm.

The Arrhenius equation indicates that as the temperature of a chemical reaction increases, the rate constant also increases exponentially.

The activation energy term (Ea) represents the minimum energy required for reactants to form products, and the pre-exponential factor (A) represents the frequency of successful collisions between reactant molecules.

This equation is commonly used in the study of chemical kinetics, which is the study of the rates of chemical reactions and the factors that affect them.

to know more about Arrhenius equation refer here:

https://brainly.com/question/30514582#

#SPJ11

Answer: d. 97.99g/mol

Explanation:

We need to add the molar mass of each of the atoms from the formula:

H3PO4 has 3x H atoms, 1x P atom, and 4x O atoms

H 3x 1.0079= 3.0237g/mol

P 1x 30.974= 30.974g/mol

O 4x 15.999= 63.996g/mol

now add all of the totals for each type of atom

3.0237 + 30.974 + 63.996= 97.9937g/mol

our answer is d. 97.99g/mol

The gravitational potential energy of the stone on the moss is 147 joules.

Gravitational potential energy is the energy possessed by an object due to its position in a gravitational field. It is defined as the energy required to move an object of a given mass from infinity to its current position against the force of gravity.

In the case of the stone weighing 1.5 kilograms resting on a rock at a height of 20 meters above the ground, the gravitational potential energy can be calculated using the formula PE = m × g × h, where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above the ground.

So, in this case, the gravitational potential energy of the stone at a height of 20 meters can be calculated as:

PE = m × g × h
PE = 1.5 kg × 9.8 N/kg × 20 m
PE = 294 J

When the stone rolls down 10 meters and comes to rest on a patch of moss, its height above the ground decreases to 10 meters. The gravitational potential energy of the stone on the moss can be calculated using the same formula:

PE = m × g × h
PE = 1.5 kg × 9.8 N/kg × 10 m
PE = 147 J

Therefore, the gravitational potential energy of the stone on the moss is 147 joules.

To know more about gravitational potential energy, visit:

https://brainly.com/question/23134321#

#SPJ11

When 0.40 mol of propane is burned completely with 2.00 mol of oxygen, the reaction produces 1.20 mol of carbon dioxide and 1.60 mol of water.

The reaction in question involves the complete combustion of 0.40 mol of propane (C3H8) with 2.00 mol of oxygen (O2). The balanced chemical equation for this reaction is:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

In this reaction, one mole of propane reacts with five moles of oxygen to produce three moles of carbon dioxide (CO2) and four moles of water (H₂O).

To determine if there is enough oxygen for the complete combustion of propane, we can use stoichiometry. For every mole of propane, we need five moles of oxygen. So, for 0.40 moles of propane, we need:

0.40 mol C₃H₈ × (5 mol O₂ / 1 mol C₃H₈) = 2.00 mol O₂

Since we have exactly 2.00 moles of oxygen available, there is enough oxygen for the complete combustion of the 0.40 moles of propane. The products formed will be:

0.40 mol C₃H₈ × (3 mol CO₂ / 1 mol C₃H₈) = 1.20 mol CO₂
0.40 mol C₃H₈ × (4 mol H₂O / 1 mol C₃H₈) = 1.60 mol H₂O

In conclusion, when 0.40 mol of propane is burned completely with 2.00 mol of oxygen, the reaction produces 1.20 mol of carbon dioxide and 1.60 mol of water.

To know more about propane, visit:

https://brainly.com/question/25008296#

#SPJ11

a) The percent ionization of nitrous acid in this 0.495M solution is 2.64%.

b) The value of Ka for nitrous acid is 4.45 x 10⁻⁴.

c) The pH of the solution formed by adding 1.0g NaNO₂ to 750mL of 0.0125M HNO₂ is 2.83.



a) Percent ionization = ([tex]10^-^p^H[/tex] / initial concentration) x 100
  Percent ionization = ( [tex]10^-^1^.^8^3[/tex] / 0.495) x 100 = 2.64%

b) Ka = [H⁺][NO₂⁻] / [HNO₂]
  Ka = ( [tex]10^-^1^.^8^3[/tex] )² / (0.495 -  [tex]10^-^1^.^8^3[/tex] ) = 4.45 x 10⁻⁴

c) 1. Calculate moles of NaNO₂: (1g / 69.0 g/mol) = 0.0145 mol
  2. Calculate initial concentration of NO₂⁻: 0.0145 mol / 0.750 L = 0.0193 M
  3. Use Henderson-Hasselbalch equation:

  pH = pKa + log([NO₂⁻]/[HNO₂])
  pH = -log(4.45 x 10⁻⁴) + log(0.0193 / 0.0125) = 2.83

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/31732200#

#SPJ11

The name of this branched alkene is 6- ethyl-8-methyl-5-propylnon-2-ene.

The longest carbon chain containing the carbon-carbon double bond is selected as the parent alkene.

The suffix ‘ane’ of the alkane is replaced by ‘ene’.

The position of double bonds or side chains indicated by numbers 1, 2, 3 etc.

The longest chain is numbered from that end, which gives the lowest number to the carbon atom of the double bond and written just before the suffix ‘ene’. If while numbering the chain the double bond gets the same number from either side the carbon chain is numbered in such a manner that the substituent gets the lowest number.

The name and position of other groups (substituents) is indicated by prefixes.

Learn more about Alkenes, here:

https://brainly.com/question/31033378

#SPJ1

The concentration of the NaOH solution is approximately 0.00624 M.

To find the concentration of the NaOH solution, you can use the titration formula:

M1V1 = M2V2

where M1 is the concentration of HCl (0.010 M), V1 is the volume of HCl (15.6 mL), M2 is the concentration of NaOH (unknown), and V2 is the volume of NaOH (25.0 mL).

0.010 M * 15.6 mL = M2 * 25.0 mL

Now, solve for M2:

M2 = (0.010 M * 15.6 mL) / 25.0 mL
M2 ≈ 0.00624 M

So, the concentration of the NaOH solution is approximately 0.00624 M.

To learn more about concentration, refer below:

https://brainly.com/question/10725862

#SPJ11

The amount of heat released by the production of 1.0 mole of SO3(g) is 196 kJ.

To determine the amount of heat released by the production of 1.0 mole of SO3(g), we need to first balance the chemical equation:

2SO2(g) + O2(g) = 2SO3(g) + 392 kJ

Now, we can see that 2 moles of SO3 are produced by releasing 392 kJ of heat. To find the heat released for 1 mole of SO3, we can set up a proportion:

(392 kJ) / (2 moles of SO3) = x kJ / (1 mole of SO3)

Solving for x:

x = (1 mole of SO3) * (392 kJ) / (2 moles of SO3)
x = 196 kJ

So, the amount of heat released by the production of 1.0 mole of SO3(g) is 196 kJ.

To learn more about heat, refer below:

https://brainly.com/question/1429452

#SPJ11

(a) [tex]CH_{3} OH[/tex]: 3 moles

(b) [tex]CH_{2} =CHCH_{3}[/tex] : 6 moles

(c) [tex]CH_{3} OCH_{3}[/tex] : 5 moles

(d) CH=CH: 3 moles

The number of moles of oxygen required for the complete combustion of different compounds can be calculated by writing the balanced chemical equation for the combustion reaction.

For example, the combustion of methanol ([tex]CH_{3} OH[/tex]) requires 3 moles of oxygen for every 2 moles of [tex]CH_{3} OH[/tex]. Similarly, the combustion of 1-butene ([tex]CH_{2} =CHCH_{3}[/tex]) requires 6 moles of oxygen for every 1 mole of [tex]CH_{2} =CHCH_{3}[/tex]. The combustion of dimethyl ether ([tex]CH_{3} OCH_{3}[/tex]) requires 5 moles of oxygen for every 2 moles of [tex]CH_{3} OCH_{3}[/tex].

The combustion of ethene ([tex]CH_{2}=CH_{2}[/tex]) requires 3 moles of oxygen for every 1 mole of CH=CH. Knowing the required amount of oxygen is important to calculate the stoichiometry of a reaction and the efficiency of combustion reactions.

To learn more about combustion, refer:

https://brainly.com/question/32079208

#SPJ1

Answer:

air is a solution because it is homogeneous, uniform throughout,and doesn't scatter light

Yes, Cayden will succeed in making curd. We would follow the same procedure to make the curd.

When a spoonful of old curd is added to warm milk, the bacteria present in the curd starts to multiply in the milk. These bacteria convert the lactose (milk sugar) present in the milk into lactic acid, which causes the milk to thicken and form curd. The process of curd formation is called curdling.

When the curdled milk is kept in a fridge, the low temperature inhibits the growth of bacteria, and the curd sets. This is because the lactic acid formed by bacteria during the curdling process makes the milk protein molecules coagulate and form a solid mass.

Therefore, Cayden's procedure of adding a spoonful of old curd to warm milk and keeping it in the fridge is an effective way to make curd.

To know more about bacteria, refer here:

https://brainly.com/question/2501232#

#SPJ11