Polonium is a rare and radioactive element that belongs to the group of chalcogens. The coordination number of polonium in a simple cubic lattice is 8.
It is known to crystallize in the simple cubic lattice structure, which is one of the three basic types of crystal lattice structures. In this structure, each polonium atom is located at the corner of a cube, sharing its electrons equally with its neighboring atoms.
The coordination number of an atom in a crystal lattice is the number of nearest neighbor atoms to which it is bonded. In the case of polonium, since each atom is located at the corner of a cube, it is in contact with eight other atoms, which are located at the corners of the adjacent cubes.
The knowledge of the crystal structure and coordination number of polonium is important for understanding its physical and chemical properties, and can also have implications in the fields of materials science, nuclear physics, and medical applications.
To know more about Polonium refer to-
https://brainly.com/question/555482
#SPJ11
Coach pollard still thinks he is really fast and so he went out to sprint at the track meet. he ran at a velocity of 4 m/s. his mass is about 68 kg. about how much kinetic energy did coach pollard use before he inevitably hurt himself after the run? ke=1/2mv^2
Coach Pollard used about 544 J of kinetic energy during his sprint.
Kinetic energy is the energy possessed by a moving object due to its motion. In this case, Coach Pollard's kinetic energy is directly proportional to his mass and the square of his velocity. As he runs faster or has more mass, his kinetic energy will increase accordingly. This is important to consider in athletics and sports where energy and power are key factors in performance.
The kinetic energy of Coach Pollard can be calculated using the formula KE = 1/2mv², where m is the mass of Coach Pollard and v is his velocity. Substituting the given values, we get KE = 1/2 × 68 kg × (4 m/s)² = 1/2 × 68 kg × 16 m²/s² = 544 J. As a result, Coach Pollard used approximately 544 J of kinetic energy throughout his sprint.
To know more about the Kinetic energy, here
https://brainly.com/question/20411782
#SPJ4
A 2.5l sample of gas is at stp. when the temperature is raised to 373 and the pressure remains constant what will the new volume of the gas be?
To solve this problem, we can use the combined gas law formula, which relates the initial and final states of a gas:
V1/T1 = V2/T2
Where:
V1 = initial volume = 2.5 L
T1 = initial temperature = 273 K (since STP is 0°C, which is 273 K)
V2 = final volume (what we need to find)
T2 = final temperature = 373 K
Rearrange the formula to find V2:
V2 = V1 * (T2 / T1)
Substitute the known values:
V2 = 2.5 L * (373 K / 273 K)
V2 ≈ 3.42 L
So, the new volume of the gas when the temperature is raised to 373 K and the pressure remains constant will be approximately 3.42 L.
For more questions on: combined
https://brainly.com/question/25290815
#SPJ11
If 9.82 g of pb(no3)4 are dissolved to make a 3.5 m solution, what is the volume (in ml.) of that solution?
The volume of the 3.5 m solution containing 9.82 g of Pb(NO3)4 is about 4.103 mL.
To calculate the volume of the solution, we need to use the formula for molality:
Molality (m) = moles of solute / kg of solvent
First, we need to find the moles of Pb(NO3)4 in 9.82 g. The molar mass of Pb(NO3)4 is approximately 683.56 g/mol.
Moles of Pb(NO3)4 = 9.82 g / 683.56 g/mol ≈ 0.01436 mol
Now, we can use the given molality (3.5 m) to find the mass of the solvent:
0.01436 mol = 3.5 m * kg of solvent
kg of solvent = 0.01436 mol / 3.5 m ≈ 0.004103 kg
Since the solvent is water, we can assume that 1 kg of water is equal to 1 L. Therefore, the volume of the solution is:
0.004103 kg * 1000 mL/kg ≈ 4.103 mL
So, the volume of the 3.5 m solution containing 9.82 g of Pb(NO3)4 is approximately 4.103 mL.
To learn more about solvent, refer below:
https://brainly.com/question/30885015
#SPJ11
What would happen to future island chains if volcanic eruptions stopped occurring on the seafloor?
If volcanic eruptions were to stop occurring on the seafloor, future island chains would no longer be formed.
This is because most island chains are formed by a geological process called plate tectonics, which involves the movement of tectonic plates and the formation of new crust at mid-ocean ridges through volcanic activity.
At mid-ocean ridges, magma rises from the mantle and solidifies to form new crust, pushing the existing crust away from the ridge.
Over time, this process can create a chain of volcanic islands as the tectonic plate moves across the hotspot, with the oldest islands being farthest from the hotspot and the youngest islands being closest.
Without volcanic eruptions on the seafloor, there would be no new crust formation and no movement of tectonic plates to create island chains.
Over time, the existing islands would be eroded and weathered by natural processes such as wind and water, and their size and shape would change.
However, it's worth noting that volcanic eruptions are not the only way that islands can form. For example, islands can also be formed through the uplift of existing land due to geological processes such as tectonic uplift or the rebound of land following the retreat of a glacier.
However, these processes typically occur over much longer time scales than volcanic island formation at mid-ocean ridges.
To know more about eruptions refer here
https://brainly.com/question/9175156#
#SPJ11
NEED HELP ASAP
How would testing such as that done in this lab exercise be valuable in real-world situations?
Testing done in lab exercises can be valuable in real-world situations by ensuring the safety, reliability, and efficiency of products and identifying potential flaws or weaknesses before they go to market.
Testing, such as that done in this lab exercise, can be incredibly valuable in real-world situations. For example, the lab exercise may involve testing the durability or strength of a particular material or product. This type of testing can be useful in real-world situations when designing and manufacturing new products. By testing the durability and strength of a material or product, designers and manufacturers can ensure that their products are safe and reliable for consumers to use. Additionally, testing can help identify potential flaws or weaknesses in a product before it goes to market, which can save companies time and money in the long run. Overall, testing is a crucial component of product development and can help ensure that products meet the needs and expectations of consumers.
Know more about Lab testing here:
https://brainly.com/question/27723597
#SPJ11
Predict which substances would have the highest volatility. explain why. ch3ch2oh c6h6 ch3och3h2opredict which substances would have the highest surface tension. explain why. h2och4ch3och3ch3oh
Predicting the substances with the highest volatility, the substances you've provided are ethanol (CH3CH2OH), benzene (C6H6), dimethyl ether (CH3OCH3), and water (H2O). Among these, dimethyl ether (CH3OCH3) has the highest volatility. This is because volatility is directly related to the strength of intermolecular forces.
Dimethyl ether has weak Van der Waals forces, making it easier for molecules to evaporate from the liquid phase to the gas phase. Ethanol and water both have hydrogen bonding, while benzene has stronger dispersion forces, resulting in lower volatility for these substances.
For the substances with the highest surface tension, the provided substances are water (H2O), methane (CH4), dimethyl ether (CH3OCH3), and methanol (CH3OH). Among these, water (H2O) has the highest surface tension. Surface tension arises from the imbalance of intermolecular forces near the surface of a liquid.
Water has strong hydrogen bonding, causing the molecules at the surface to be attracted to each other, creating a high surface tension. Methane has weak Van der Waals forces, while dimethyl ether and methanol have intermediate forces between hydrogen bonding and Van der Waals forces, resulting in lower surface tensions for these substances.
To know more about highest volatility refer here
brainly.com/question/30354221#
#SPJ11
what conclusions can you draw about the relationship between the structure of the fabric molecule and the intensity with which the azo dyes color the fabric?
Refute Dalton‟s Theory of “indivisible” atom using J.J. Thompson‟s and Rutherford Model of the atom.
Differentiate between the following.
The spectra line of white light and the spectral lines of elements. Ground state of an electron and the excited state
Calculate the wavelength the frequency and energy of the lines in the Balmer series when n2 = 3 and 5
The wave number of a line in the Lyman series is 10282383.75m-1
i. Calculate the frequency and energy of the series ii. Which line in the series is it?
Give reasons for the following: (i) The nucleus accounts for the mass of an atom. (ii) The number of protons tells us the name of the element. (iii) Atomic masses unlike the atomic numbers are not whole numbers.
6. Verify that the atomic mass of magnesium is 24.31, given the following: 24Mg= 23.985042amu, (78.99%) ; 25Mg= 24.985837 amu, (10.00% ); 26Mg= 25.982593, (11.01%)
Dalton's theory of the "indivisible" atom was refuted by the discovery of subatomic particles by J.J. Thompson and the Rutherford model.
Spectral lines of elements are discrete wavelengths of light, unlike the continuous spectrum of white light. Electrons in the ground state have the lowest energy, while those in the excited state have higher energy. The Balmer series produces specific wavelengths, frequencies, and energies when n2=3 and n1=2.
The wave number of a line in the Lyman series is 10282383.75 m^-1, with a frequency of 2.92 x 10^14 Hz and an energy of 1.94 x 10^-19 J. The nucleus accounts for an atom's mass, and the number of protons determines the element's identity.
Atomic masses are not whole numbers because they reflect the abundance of different isotopes. The atomic mass of magnesium is 24.31, calculated using the percent abundance and mass of each isotope.
Learn more about atomic masses, here:
https://brainly.com/question/17067547
#SPJ1
You perform a titration where you add 0.35 m hcl to a flask containing 50 ml of 0.75 m naoh. what is the ph after you add 50 ml of 0.35 m hcl
The pH after adding 50 mL of 0.35 M HCl to a flask containing 50 mL of 0.75 M NaOH is approximately 12.68.
1. Calculate moles of NaOH: moles = M x V = 0.75 M x 0.05 L = 0.0375 moles
2. Calculate moles of HCl: moles = M x V = 0.35 M x 0.05 L = 0.0175 moles
3. Determine moles of excess OH-: moles = moles of NaOH - moles of HCl = 0.0375 - 0.0175 = 0.02 moles
4. Calculate the concentration of excess OH-: [OH-] = moles / total volume = 0.02 moles / 0.1 L = 0.2 M
5. Determine the pOH: pOH = -log10[OH-] = -log10(0.2) = 0.699
6. Calculate the pH: pH = 14 - pOH = 14 - 0.699 ≈ 12.68
To know more about pH click on below link:
https://brainly.com/question/2288405#
#SPJ11
What mass of LiOH would need to be dissolved in water to make 300. 0 mL of a solution with a pH of 11. 25
We need to dissolve 0.0405 mg mass of LiOH in 300.0 mL of water to get a solution with a pH of 11.25.
To find the mass of LiOH needed to make the solution, we need to first calculate the concentration of hydroxide ions in the solution using the pH value. Since pH = 11.25, the [OH⁻] concentration can be found by taking the negative logarithm of 11.25 and converting it to the concentration scale.
[tex][OH^-] = 10^{-11.25} = 5.62 \times 10^{-12} \, \text{M}[/tex]
Since LiOH is a strong base, it will dissociate completely in water, so the amount of LiOH needed can be calculated using the stoichiometry of the balanced equation:
LiOH + H₂O → Li⁺ + OH⁻ + H₂O
Thus, 1 mole of LiOH produces 1 mole of OH⁻. To achieve a concentration of 5.62 x 10⁻¹²M, we need 5.62 x 10⁻¹² moles of LiOH per mL of solution. Therefore, for 300.0 mL of solution, the number of moles of LiOH needed is:
[tex]\[5.62 \times 10^{-12} \, \text{mol/mL} \times 300.0 \, \text{mL} = 1.69 \times 10^{-9} \, \text{mol}\][/tex]
The molar mass of LiOH is 23.95 g/mol, so the mass of LiOH needed is:
1.69 x 10⁻⁹ mol x 23.95 g/mol = 4.05 x 10⁻⁸ g or 0.0405 mg (to 4 significant figures).
To know more about the LiOH refer here :
https://brainly.com/question/1686138#
#SPJ11
You want to link a suspect to a crime scene. You have a DNA sample that you’ve taken from the crime scene, but the suspect is nowhere to be found so you can’t get his DNA to compare it to. However, the suspect’s family has agreed to give you samples of their DNA. Which family member would be the best option to help you see if the crime scene sample can be linked to the suspect?
The suspect’s cousin
The suspect’s grandfather
The suspect’s stepmother
The suspect’s twin brother
The best option to help you see if the crime scene sample can be linked to the suspect would be the suspect's twin brother. The correct answer choice is "The suspect’s twin brother"
This is because twins, specifically identical twins, share almost 100% of their DNA. Comparing the DNA sample from the crime scene to the twin brother's DNA would provide the most accurate and reliable indication of whether the suspect is linked to the crime scene or not.
Other family members, such as the cousin, grandfather, and stepmother, would share a lesser degree of genetic similarity with the suspect, making it less conclusive for establishing a link.
Therefore, "The suspect’s twin brother" is the correct answer choice.
For more such questions on crime scene, click on:
https://brainly.com/question/29025973
#SPJ11
You have one test tube which contains a white solid that is either agcl (s) or pbcl2 (s). select a reagent that will allow you to differentiate between the two chemical species. if the solid is agcl, what will happen when the reagent is added
To differentiate between AgCl(s) and PbCl₂(s), we can use a reagent that reacts differently with each compound. One such reagent is a solution of ammonia (NH₃).
When ammonia is added to AgCl(s), it will dissolve the solid and form a colorless, soluble complex ion, [Ag(NH₃)2]+. This is because AgCl is soluble in ammonia due to the formation of the complex ion.
AgCl(s) + 2NH₂(aq) → [Ag(NH₃)2]+(aq) + Cl^-(aq)
On the other hand, when ammonia is added to PbCl₂(s), it will not dissolve the solid, and there will be no observable reaction. This is because PbCl₂ is not soluble in ammonia, and the complex ion does not form.
PbCl₂(s) + 2NH₃(aq) → No observable reaction
Therefore, the addition of ammonia to the test tube containing the white solid will help differentiate between AgCl and PbCl₂.
If the solid is AgCl, it will dissolve in the ammonia solution and form a colorless complex ion, while if the solid is PbCl₂, there will be no observable reaction.
to know more about reagents refer here:
https://brainly.com/question/31228572#
#SPJ11
Complete the balanced molecular chemical equation for the reaction below. If no reaction occurs, write NR after the reaction arrow. Be sure to include the proper phases for all species within the reaction.
H₂SO₄(aq) + CsOH(aq) →
Answer ASAP PLEase
The balanced molecular chemical equation for the reaction below is as follows;
H₂SO₄(aq) + 2CsOH(aq) → Cs₂SO₄(aq) + 2H₂O(l)
What is a molecular chemical equation?A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.
According to this question, a chemical equation occurs between sulfuric acid and caesium hydroxide to produce caesium sulphate and water.
The equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.
The balanced chemical equation of the reaction is as illustrated above.
Learn more about chemical equation at: https://brainly.com/question/28294176
#SPJ1
______ hydrocarbons are organic compounds that consist of hydrocarbons to which one or more functional groups have been substituted for one or more hydrogen atoms or carbon groups.
Substituted hydrocarbons are organic compounds that consist of hydrocarbons to which one or more functional groups have been substituted for one or more hydrogen atoms or carbon groups.
The functional group is a specific group of atoms that gives the molecule its characteristic properties and reactions.
Substitution is the process by which one or more hydrogen atoms or carbon groups are replaced by a functional group.
By substituting one or more hydrogen atoms or carbon groups in a hydrocarbon chain, we get a new molecule that has its own characteristic properties.
To know more about hydrocarbons visit:
https://brainly.com/question/30907363
#SPJ11
A gas occupies 900 mL at a temperature of 27. 0°C. What is the
Temperature of the gas if the volume of the container increases to 1074
mL?
The temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C
The behavior of gases is affected by several factors including temperature, pressure, and volume. One important principle that applies to gases is that they tend to occupy the entire volume of their container. Therefore, if the volume of the container increases, the gas will occupy more space.
In this particular scenario, the gas initially occupies 900 mL at a temperature of 27.0°C. When the volume of the container increases to 1074 mL, we need to determine the corresponding temperature of the gas. To do this, we can use the formula:
(V1/T1) = (V2/T2)
Where V1 and T1 represent the initial volume and temperature of the gas, respectively, and V2 and T2 represent the final volume and temperature of the gas, respectively.
Substituting the given values into the formula, we get:
(900/300.15) = (1074/T2)
Simplifying the equation, we can cross-multiply and solve for T2:
900T2 = 1074 x 300.15
T2 = 1074 x 300.15 / 900
T2 = 358.15 K
Therefore, the temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C (rounded to one decimal place).
To know more about temperature, visit:
https://brainly.com/question/11464844#
#SPJ11
My teacher gave me this question for homework need help
A copper sulfate solution contained 0. 100 moles of copper sulfate dissolved in 0. 500 dm3 of water. Calculate the mass of copper sulfate in 30. 0 cm3 of this solution. Relative formula mass (Mr): CuSO4 = 159. 5
The mass of copper sulfate in 30.0 cm3 of this solution is 0.957 g.
The concentration of the copper sulfate solution is given by:
c = n ÷ V
c = 0.100 mol/0.500 dm³
c = 0.200 mol/dm³
To calculate the mass of copper sulfate in 30.0 cm³ of this solution, we first need to calculate the number of moles of copper sulfate in this volume:
n = c x V
n = 0.200 mol/dm³ x (30.0 cm³ ÷ 1000 cm³/dm³)
n = 0.006 mol
The mass of copper sulfate can be calculated using its molar mass:
m = n x Mr
m = 0.006 mol x 159.5 g/mol
m = 0.957 g
To learn more about copper follow the link:
brainly.com/question/22560035
#SPJ4
Why is lead (Pb) able to react with different elements ?
Lead (Pb) is able to react with different elements because it has a relatively low ionization energy, which means that it requires less energy to remove an electron from a lead atom compared to other elements.
Why does lead have low ionization energy?Low ionization energy makes it more likely for lead to form compounds with other elements by giving up electrons or sharing them in covalent bonds. Additionally, lead has a relatively high atomic mass, which makes it more likely to form ionic compounds with lighter elements that have lower atomic masses.
The ability of lead to react with different elements also depends on the specific conditions under which the reaction occurs, such as temperature, pressure, and the presence of other reactants or catalysts.
Find out more on lead here: https://brainly.com/question/18110420
#SPJ1
A 7. 15L balloon filled with gas is warmed from 256. 1K to 297. 1 K. What is the volume of the gas after it is heated?
When a 7.15L balloon filled with gas is warmed from 256.1K to 297.1K, the volume of the gas inside the balloon increases to 8.27L.
The volume of the gas in the balloon can be calculated using the Ideal Gas Law, which states that the product of pressure, volume, and temperature is proportional to the number of molecules in the gas.
This law is expressed mathematically as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.
In this case, the pressure and number of molecules of the gas remain constant, so we can simplify the Ideal Gas Law to V1/T1 = V2/T2, where V1 is the initial volume of the gas, T1 is the initial temperature, V2 is the final volume of the gas, and T2 is the final temperature. Solving for V2, we get V2 = (V1 x T2) / T1.
Substituting the given values, we get V2 = (7.15L x 297.1K) / 256.1K = 8.27L. Therefore, the volume of the gas in the balloon after it is heated to 297.1K is 8.27L.
In conclusion, when a 7.15L balloon filled with gas is warmed from 256.1K to 297.1K, the volume of the gas inside the balloon increases to 8.27L.
To know more about volume, visit:
https://brainly.com/question/1578538#
#SPJ11
Pressure: 101. 3 kPa → 1. 92 atm
Volume: ? L→ 8. 0 L
Assume constant temperature and number of moles.
The initial volume is 15.36 L when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.
To find the initial volume in liters when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L. We will assume constant temperature and number of moles.
Step 1: Convert the initial pressure to atm.
1 atm = 101.325 kPₐ, so:
(101.3 kPₐ) × (1 atm / 101.325 kPₐ) = 1.000 atm (approximately)
Step 2: Apply Boyle's Law, which states that P₁×V₁ = P₂×V₂ when temperature and moles are constant.
P₁ = 1.000 atm
P₂ = 1.92 atm
V₂ = 8.0 L
Step 3: Solve for the initial volume, V₁.
1.000 atm × V₁ = 1.92 atm × 8.0 L
V₁ = (1.92 atm * 8.0 L) / 1.000 atm
V₁ = 15.36 L
The initial volume is 15.36 L when the pressure changes from 101.3kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.
To know more about Boyle's Law :
https://brainly.com/question/1437490
#SPJ11
Which property is size-independent?
conductivity
width
volume
mass
Conductivity is a measure of a material's ability to conduct electricity, which is determined by the flow of charged particles. The correct answer is Option: 1.
The ability to conduct electricity does not depend on the size or shape of the material, but rather on its chemical composition and the mobility of its charged particles. On the other hand, width (Option 2), volume (Option 3), and mass (Option 4) are all size-dependent properties. Width and volume are directly proportional to the size of an object, while mass is a measure of the amount of matter in an object, which is also size-dependent. Hence option 1 is correct.
To know more about Conductivity, here
brainly.com/question/21496559
#SPJ1
--The complete Question is, Which property is size-independent?
1. conductivity
2. width
3. volume
4. mass--
When 10 moles HCl reacts with Ca(OH) 2 how many moles of H_{2}*O are made?
The amount of Ca(OH)₂ produced = 5.2 g which is calculated in the below section.
NUMBER OF MOLES of HCl = Molarity of solution x Volume of Solution
# of moles of HCl = (0.40 mol/L ) x 350 mL
= (0.40 mol/L ) x 0.350 L
= 0.14 mol
The mass of HCl that makes 0.14 mol of HCl
Mass of HCl= # of moles x molar mass of HCl
Mass of HCl = 0.14 mol x 36.5 g/ mol
Mass of HCl = 5.11g
As per Stoichiometry , 1g of HCl reacts with 1.015 g of Ca (OH)₂
So, 5.11g of HCl can react with 5.11 x 1.015 g
= 5.1865 g or 5.2 g of Ca(OH)₂
To learn more about number of moles check the link below-
https://brainly.com/question/29367909
#SPJ4
if 5.0 ml of 0.10 m naoh is added to 25.0 ml of 0.10 m hcl, what will be the ph of the resulting solution? round your answer to two decimal places.
The pH of the resulting solution is 1.08 (rounded to two decimal places).
First, we need to calculate the amount of acid and base present:
moles of HCl = (0.10 mol/L) * (0.025 L) = 0.0025 mol \\moles of NaOH = (0.10 mol/L) * (0.005 L) = 0.0005 mol
Since HCl and NaOH react in a 1:1 ratio, all of the NaOH will be used up in the reaction and 0.0005 moles of HCl will be left unreacted.
So, total volume of the solution will be [tex]25.0 ml + 5.0 ml = 30.0 ml = 0.03 L[/tex]
The concentration of unreacted HCl will be:
C(HCl) = (0.0025 mol) / (0.03 L) = 0.0833 M
Now we can calculate the pH : pH = -log[H+]
[H+] = 0.0833 M \\pH = -log(0.0833) = 1.08
To know more about solution, here
brainly.com/question/30665317
#SPJ4
Answer:
pH = 1.18
Explanation:
First, calculate the moles of acid in the solution:
(0.0250 L )(0.10molL)=0.0025 mol acid
Next, calculate the moles of base:
(0.0050 L)(0.10molL)=0.00050 mol base
The strong acid and strong base will dissociate completely to generate the same number of moles of hydronium and hydroxide, respectively. The amount of acid exceeds the amount of base, so all the added hydroxide will neutralize an equivalent amount of hydronium. To find the remaining amount of hydronium, we subtract the moles of hydroxide added (equal to the moles of hydronium neutralized) from the moles of hydronium added:
0.0025 mol H3O+−0.00050 mol OH−=0.0020 mol H3O+
To find the concentration of hydronium, we must divide this number of moles by the total volume of solution, being sure to add the volumes of acid and base added together:
0.0020 mol H3O+0.0300 L≈0.06667 M H3O+
Finally, take the negative logarithm of this amount to obtain the pH.
-log(0.06667)=1.18
Since the hydronium concentration is only precise to two significant figures, the logarithm should be rounded to two decimal places.
When 4 g of a metal carbonate MCO, was dissolved in 160 cm of 1 M hydrochloric acid and then the resultant solution diluted to one litre, 25. 0 cm of this solution required 20. 0 cm' of 0. IM sodium hydroxide solutidn for complete neutralisation, calculate:
(i) The number of moles per litre of excess hydrochloric acid that reacted with sodium hydroxide, NaOH.
(ii) The number of moles per litre of acid that reacted with the carbonate.
(iii) The number of moles of carbonate, MCO, that reacted with the acid.
(iv) The formula mass of the carbonate, MCO, (v) The atomic mass of the metal M. (C = 12. 0. 0 = 16. 0)
(i) The number of moles per litre of excess hydrochloric acid that reacted with sodium hydroxide, NaOH, is 0.2.
(ii) The number of moles per litre of acid that reacted with the carbonate is 0.04.
(iii) The number of moles of carbonate, MCO, that reacted with the acid is 0.008.
(iv) The formula mass of the carbonate, MCO, is the sum of the atomic masses of the carbon, oxygen and metal atoms, i.e., MCO, M + 12 + 16 = M + 28.
(v) The atomic mass of the metal M can be determined by subtracting 28 from the formula mass of the carbonate. Thus, M = formula mass of MCO - 28.
In summary, the given information is used to calculate the number of moles per litre of excess hydrochloric acid, the number of moles per litre of acid that reacted with the carbonate, the number of moles of carbonate that reacted with the acid, the formula mass of the carbonate and the atomic mass of the metal.
Know more about Hydrochloric acid here
https://brainly.com/question/15231576#
#SPJ11
How many grams of iron(III) sulfate, Fe2(SO4)3, are produced in the reaction if 2. 25 moles of hydrogen gas are produced? (round two decimal places)
The mass of iron(III) sulfate comes out to be 899.73 g, the calculations are shown below.
Considering, the moles of Fe₂(SO₄)₃ to be 2.25 moles.
Molar mass of Fe₂(SO₄)₃ = 399.88 g/mol.
To calculate the number of moles, the below formula is used-
Number of moles = Mass/molar mass
Substituting the known values in the above equation as follows-
2.25 moles = Mass / 399.88 g/mol
Mass = 2.25 moles x 399.88 g/mol
= 899.73 g
Therefore, the mass of iron(III) sulfate comes out to be 899.73 g.
To learn more about molar mass check the link below-
https://brainly.com/question/837939
#SPJ4
The method used to find the volume of acid that reacts with a known volume of alkali is called
The method used to find the volume of acid that reacts with a known volume of alkali is called acid-base titration.
In this method, a solution of known concentration (the titrant) is slowly added to a solution of unknown concentration (the analyte) until the reaction between the two is complete.
The point at which the reaction is complete is determined using an indicator or by measuring the pH of the solution. The volume of titrant required to reach this point is used to calculate the concentration of the analyte solution.
The method is widely used in analytical chemistry to determine the concentration of acids, bases, and other reactive substances in solution.
To know more about titration refer to-
https://brainly.com/question/30046193
#SPJ11
What is the empirical formula for a compound that is 94. 1% oxygen and 5. 90 % hydrogen?
The empirical formula for this compound is H1O1.
To find the empirical formula of a compound with 94.1% oxygen and 5.9% hydrogen, we first assume a 100g sample. This gives us 94.1g of oxygen and 5.9g of hydrogen. Next, we'll convert these values to moles:
Oxygen: 94.1g / 16g/mol (molar mass of O) ≈ 5.88 moles
Hydrogen: 5.9g / 1g/mol (molar mass of H) ≈ 5.9 moles
Now, we'll find the mole ratio by dividing both values by the smallest number of moles:
Oxygen: 5.88 / 5.88 ≈ 1
Hydrogen: 5.9 / 5.88 ≈ 1
The empirical formula for this compound is H1O1, which can be simplified to H2O (water).
To learn more about hydrogen, refer below:
https://brainly.com/question/28937951
#SPJ11
The hypothetical elements shown here (figures a—d) do not include hydrogen or helium. Which element would you expect to bond covalently with an oxygen atom to form a two-atom molecule?
There are so many elements that can be able to bond with oxygen in a covalent manner as shown below.
What elements bond covalently to oxygen?Elements that can bond covalently with oxygen to form two-atom molecules include carbon (C), nitrogen (N), fluorine (F), chlorine (Cl), and many others.
The specific element that would form a covalent bond with oxygen depends on a variety of factors, including the electronegativity and valence electron configuration of the elements involved as shown.
Learn more about bonds:https://brainly.com/question/30480258
#SPJ1
An aqueous solution of sodium acetate, nach3coo, is made by dissolving 13.8 grams of sodium acetate in sufficient water in a 300. ml volumetric flask, and then adding enough water to fill the flask to the mark. what is the weight/volume percentage of sodium acetate in the solution?
The weight/volume percentage of sodium acetate in the solution is 4.6%.
The weight/volume percentage of sodium acetate in the solution can be calculated using the formula:
Weight/volume percentage = (Weight of solute ÷ Volume of solution) x 100%
In this case, the weight of sodium acetate is 13.8 grams and the volume of solution is 300 ml.
Therefore,
Weight/volume percentage = (13.8 g ÷ 300 ml) x 100%
Weight/volume percentage = 0.046 x 100%
Weight/volume percentage = 4.6%
Therefore, the weight/volume percentage of sodium acetate in the solution is 4.6%.
To know more about weight/volume percentage visit:
https://brainly.com/question/28751781
#SPJ11
What is the concentration of hydrochloric acid, HCL(aq) that gives a solution with a pH of 3.69?
To solve this problem, we need to use the pH formula:
pH = -log[H+]
where [H+] represents the concentration of hydrogen ions in moles per liter (M).
To find [H+], we can rearrange the formula:
[H+] = 10^(-pH)
Substituting pH = 3.69, we get:
[H+] = 10^(-3.69) = 2.21 × 10^(-4) M
Since hydrochloric acid is a strong acid, it completely dissociates in water to give hydrogen ions and chloride ions:
HCl(aq) → H+(aq) + Cl-(aq)
Therefore, the concentration of hydrochloric acid required to give a solution with a pH of 3.69 is also 2.21 × 10^(-4) M.
Based on the electron configuration of the two
atoms, predict the ratio of metal cationic (+) atom
to nonmetal anionic (-) atom in the compound.
magnesium 1s22s22p63s2
sulfur 1s22s22p3s23p4
a. 1:1
b. 1:2
c. 2:1
d. 3:1
Answer is B) 1:2
The electron configuration of magnesium is 1s2 2s2 2p6 3s2, which means it has two valence electrons that it can lose to form a cation with a +2 charge.
The electron configuration of sulfur is 1s2 2s2 2p6 3s2 3p4, which means it has six valence electrons that it can gain to form an anion with a -2 charge.
Since magnesium can form a cation with a +2 charge and sulfur can form an anion with a -2 charge, the ratio of metal cationic (+) atom to nonmetal anionic (-) atom in the compound will be 1:2. Therefore, the answer is b. 1:2.
To know more about electronic configuration:
https://brainly.com/question/26084288
#SPJ11
