f(x)=(2−x)(x+4)^2(A) Find all critical values of f. If there are no critical values,enter -1000. If there are more than one, enter them separated bycommas.Critical value(s) = ______________(B

The temperature of 80°F is equivalent to 48°C.

To convert 80°F to Celsius degrees using the formula C = (F - 32), we substitute the given Fahrenheit temperature into the formula.

C = (80 - 32) = 48

Therefore, the temperature of 80°F is equivalent to 48°C.

The Celsius scale is commonly used in scientific and international contexts, while the Fahrenheit scale is more prevalent in the United States. The conversion formula allows us to convert temperatures between these two scales.

Rounding to the nearest tenth of a degree, we find that 48°C remains unchanged.

It's worth noting that the Celsius scale sets the freezing point of water at 0°C and the boiling point at 100°C at standard atmospheric pressure. In contrast, on the Fahrenheit scale, water freezes at 32°F and boils at 212°F.

Learn more about Celsius degrees, and Fahrenheit temperature.

brainly.com/question/31376890

#SPJ11

The unit rate of change of ddd with respect to ttt is 4/3.

To graph the proportional relationship between ddd and ttt, we first need to find the unit rate of change. Since an increase of 333 units in ttt corresponds to an increase of 444 units in ddd, we can calculate the unit rate as follows:

Unit Rate = (Change in ddd) / (Change in ttt) = 444 / 333 = 4/3

So, a change of 1 unit in ttt corresponds to a change of 4/3 units in ddd.

Now, let's graph the relationship. The equation representing this proportional relationship is:

ddd = (4/3)ttt

This is a linear relationship with a slope of 4/3 and passes through the origin (0,0). To plot the graph, start at the origin and use the slope to plot additional points, such as:
- For ttt = 3, ddd = 4 (since 4/3 * 3 = 4)
- For ttt = 6, ddd = 8 (since 4/3 * 6 = 8)

Plot these points and draw a straight line through them, representing the proportional relationship between ddd and ttt. The unit rate of change of ddd with respect to ttt is 4/3.

To learn more about equation, refer below:

https://brainly.com/question/29657983

#SPJ11

If a couple of two-way radios were purchased from different stores. The  number of square miles does two-way radio A cover. 154 square miles.

Part A:

Radius of two-way radio A = 7 miles

Area of circle = πr^2 = 3.14 x 7^2 = 153.86 square miles

Rounding to the nearest whole number, two-way radio A covers 154 square miles.

Part B:

Radius of two-way radio B = 9.66 kilometers

Area of circle = πr^2 = 3.14 x 9.66^2 = 293.15 square kilometers

Rounding to the nearest whole number, two-way radio B covers 293 square kilometers.

Part C:

1 mile = 1.61 kilometers

Area covered by two-way radio A = π(7)^2 = 153.86 square miles

Converting square miles to square kilometers:

153.86 x 1.61^2 = 393.73 square kilometers

Area covered by two-way radio B = π(9.66)^2 = 293.15 square kilometers

Comparing the areas, we can see that two-way radio A covers the larger area.

Part D:

The scale factor relationship between the radio coverages can be determined by comparing their radii.

Radius of two-way radio A = 7 miles

Radius of two-way radio B = 9.66 kilometers = 6 miles (rounded to two decimal places)

Therefore, the scale factor relationship between the radio coverages is 7:6 or 1.17:1 (rounded to two decimal places).

Learn more about number of square miles here:https://brainly.com/question/29363894

#SPJ1

[tex](\text{x}+2)^{1/2}-5 = -2\\\\\sqrt{\text{x}+2}-5 = -2\\\\\sqrt{\text{x}+2} = -2+5\\\\\sqrt{\text{x}+2} = 3\\\\(\sqrt{\text{x}+2})^2 = 3^2\\\\\text{x}+2= 9\\\\\text{x}= 9-2\\\\\text{x}= 7\\\\[/tex]

-----------------------

Check:

[tex](\text{x}+2)^{1/2}-5 = -2\\\\\sqrt{\text{x}+2}-5 = -2\\\\\sqrt{7+2}-5 = -2\\\\\sqrt{9}-5 = -2\\\\3-5 = -2\\\\-2 = -2 \ \ \ \checkmark\\\\[/tex]

The answer is confirmed.

-----------------------

The best step when constructing a tangent to the circle is to strike an arc on bq with a center of b that has a length the same as the radius of circle q. The correct answer is option a.

When constructing a tangent to a circle with a center point of Q that passes through point B, and having already connected points Q and B to form line segment BQ, the best next step is to: A) Strike an arc on BQ with a center of B that has a length the same as the radius of circle Q.

This will help you find the point where the tangent line intersects the circle, allowing you to complete the tangent construction. The tangent line will be perpendicular to the radius at the point of tangency.

Therefore option a is correct.

Learn more about Tangent:

https://brainly.com/question/30162650

#SPJ11

The slope of this graph is equal to 2.

In Mathematics and Geometry, the slope of any straight line can be determined by using this mathematical equation;

Slope (m) = (Change in y-axis, Δy)/(Change in x-axis, Δx)

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

By substituting the given points into the formula for the slope of a line, we have the following;

Slope, m of graph = (80 - 0)/(100 - 60)

Slope, m of graph = 80/40

Slope, m of graph = 2.

Read more on slope here: brainly.com/question/3493733

#SPJ1

The length of the rectangle is 15 cm and the width is 9 cm.

Let's start by setting up the equations we need to solve:

L = 2W - 3 (the length is 3 cm less than twice the width)

2L + 2W = 48 (the perimeter is 2 times the length plus 2 times the width)

Now we can substitute the first equation into the second equation and solve for W:

2(2W - 3) + 2W = 48

4W - 6 + 2W = 48

6W = 54

W = 9

Now that we know the width is 9 cm, we can substitute this value back into the first equation and solve for L:

L = 2(9) - 3

L = 15

Learn more about width

brainly.com/question/29281920

#SPJ11

The factored form of 21r-56 is: 21r-56 = 7r(-5) or 7r*(-5)

Factoring is the process of finding the factors (or divisors) of a given mathematical expression or number. In algebra, factoring involves breaking down an expression into simpler parts (called factors) that can be multiplied together to obtain the original expression. The goal of factoring is to simplify the expression or solve an equation by expressing it in terms of its factors.

In the given question,

To factor 21r-56, we first need to find the greatest common factor (GCF) of the two terms. The GCF of 21 and 56 is 7. We can also factor out r since it is a common factor of both terms. Therefore, we can write:

21r-56 = 7r(3-8)

Simplifying the expression inside the parentheses, we get:

21r-56 = 7r(-5)

Therefore, the factored form of 21r-56 is:

21r-56 = 7r(-5) or 7r*(-5).

To know more about factoring and equation, visit:

https://brainly.com/question/1863222

#SPJ1

The complete range of acceptable pressures, p, for the scuba tanks is 2,600 psi ≤ p ≤ 3,300 psi to ensure safe and enjoyable diving experiences.

Maintaining the correct pressure in scuba tanks is critical for safe and enjoyable diving experiences. If the pressure is too low, the diver may not have enough air to complete the dive and may be at risk of running out of air.

If the pressure is too high, the tank could rupture or explode, posing a significant danger to the diver. It is essential to keep the pressure within the acceptable range of 2,600 psi to 3,300 psi.

This means that the pressure of the scuba tanks must be greater than or equal to 2,600 psi and less than or equal to 3,300 psi.The inequality that expresses the complete range of acceptable pressures, p, in psi, for the scuba tanks is 2,600 psi ≤ p ≤ 3,300 psi.

Learn more about range here:

https://brainly.com/question/30067462

#SPJ4

To find the area of each shaded sector and round to the hundredths place, I'll need some more information, such as the radius of the circle and the measure of the central angle of the sector. Please provide these details so I can assist you with the calculation.

The area of the shaded sector is 1330.81 ft²

Given, ∠GKH = 26° and ∠JKI = 90°

The area that is not shaded has a total of 90° + 26° = 116°.

A circle has a total angle of 360°, so the area that is shaded must be

360° - 116° =  244°

Given, HK = 25 ft

Radius of circle = 25 ft

We know that the formula for the area of the sector of a circle is

Area = [tex]\frac{\pi \theta r^2}{360^\circ}[/tex]

= (π × 244 × (25)² )/ 360

= 7625π/18

= 1330.81 ft²

Hence, the area of the shaded sector is 1330.81 ft²

Learn more about the area of sector here

https://brainly.com/question/27799926

#SPJ4

Given question is incomplete, the complete question is below

Find the area of each shaded sector. round to the hundredths place.

Therefore, two possible values of α are approximately 138.19° and 221.81°.

Sin 180 has a precise value of zero. One of the fundamental trigonometric functions is sine, which is used to calculate the angle or sides of a right-angled triangle.

Given that cos = -8/17, we must determine two potential values for.

We can construct a right triangle with the adjacent side equal to -8 and the hypotenuse equal to 17, and then use the Pythagorean theorem to calculate the opposite side since cos = adjacent/hypotenuse.

The Pythagorean theorem gives us:

opposite² = hypotenuse² - adjacent²

opposite² = 17² - (-8)²

opposite² = 225

opposite = ±15

Both the x and y coordinates are negative in the second quadrant, resulting in:

cos α = -8/17

sin α = -15/17

Consequently, may have the following value: = 180° - arccos(-8/17) 138.19° (rounded to two decimal places)

The x coordinate is negative and the y coordinate is positive in the third quadrant, resulting in:

cos α = -8/17

sin α = 15/17

Therefore, another possible value of α is:

α = 360° - cos(-8/17)

≈ 221.81°

To know more about possible values visit:-

https://brainly.com/question/23275794

#SPJ9

The value of the missing side is 58. 75

To determine the value of the missing side, we need to know the different identities and their ratios.

These trigonometric identities are;

We have their ratios as;

sin θ = opposite/hypotenuse

tan θ = opposite/adjacent

cos θ = adjacent/hypotenuse

We have that the;

Angle = 57 degrees

Adjacent = 32

Hypotenuse side = x

Then, we have;

Substitute the values for the cosine identity, we get

cos 57 = 32/x

cross multiply

x = 58. 78

Learn about trigonometric identities at: https://brainly.com/question/7331447

#SPJ1

The linear function rule that models the total cost y​ for any number of sweatshirts x would be: y = 9.50x

What is Algebraic expression ?

An algebraic expression is a combination of variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division. It may contain one or more terms, with each term separated by a plus or minus sign. Algebraic expressions are used in algebra to represent mathematical relationships and formulas.

To write a linear function rule that models the total cost y​ (in dollars) for any number of sweatshirts x, we can use the equation of a line which is given as:

y = mx + b

where m is the slope of the line and b is the y-intercept.

In this case, the slope represents the cost per sweatshirt, which is $7.00, and the y-intercept represents the fixed cost, which is the shipping charge of $2.50. Therefore, the linear function rule that models the total cost y​ for any number of sweatshirts x can be written as:

y = 7x + 2.50

If the shipping charge applied to each sweatshirt, the linear function rule would change. In this case, the cost per sweatshirt would be the sum of the base cost of $7.00 and the shipping charge of $2.50, which is $9.50. Therefore, the linear function rule that models the total cost y​ for any number of sweatshirts x would be: y = 9.50x

To learn more about Algebraic expression from given link.

brainly.com/question/31238826

#SPJ1

Thus, 25.13 cubic inches is the closest estimate for the ice cream's overall volume.

Volume is a mathematical concept that describes how much space a three-dimensional object occupies. It is frequently expressed in terms of cubic units like cubic metres (m3), cubic feet (ft3), or cubic centimetres (cm3). Depending on the shape of the object, different formulas can be used to determine its volume. Consider this: The formula V = l w h, where l has been the length, w is the broad, and h corresponds to the height of the rectangular prism (box), gives the volume of the object. A sphere's volume can be calculated using the method V = (4/3)r3, where r is the sphere's radius.

given

The formula for a cone's volume is as follows, assuming that the ice cream has the correct circular cone shape with radius r = 2 in and height h = 6 in:

[tex]V = (1/3) * \pi * r^2 * h[/tex]

Inputting the values provided yields:

[tex]V = (1/3) * \pi * (2 in) * (2 in) * (6 in)[/tex] = 25.13 cubic inches

Thus, 25.13 cubic inches is the closest estimate for the ice cream's overall volume.

To know more about volume visit :-

https://brainly.com/question/1578538

#SPJ1

The complete question is:-  

r = 2 in.

h = 6 in.

Which is closest to the total volume of the ice

cream?

Answer:

0 hrs 32 mins

Step-by-step explanation:

The coordinates of point D would be (0,y) where y is the vertical distance between points A and D.

Without knowing the exact location of point A and the dimensions of the rectangle, it is impossible to determine the coordinates of points B and D with certainty.

However, if we assume that point A is located at (0,0), and the length and width of the rectangle are given by the horizontal and vertical distances between points A and B, and between points A and D, respectively, we can find the coordinates of points B and D.

For example, if the length of the rectangle is 5 and the width is 3, then point B would be located at (5,0) and point D would be located at (0,3).

In general, the coordinates of point B would be (x,0) where x is the horizontal distance between points A and B, and the coordinates of point D would be (0,y) where y is the vertical distance between points A and D.

Learn more about coordinates

brainly.com/question/16634867

#SPJ11

The angular velocity of the elbow during the elbow flexion exercise was approximately 523.81 degrees/s

To calculate the angular velocity of the elbow during an elbow flexion exercise, we'll use the information given about the relative angle at different times. Here's the step-by-step explanation:
First, find the change in relative angle: Δθ = Final angle - Initial angle = 120 degrees - 10 degrees = 110 degrees.
Next, find the change in time: Δt = Final time - Initial time = 0.71s - 0.5s = 0.21s.
Now, calculate the angular velocity: ω = Δθ / Δt = 110 degrees / 0.21s ≈ 523.81 degrees/s.
So, the angular velocity of the elbow during the elbow flexion exercise was approximately 523.81 degrees/s.

Learn more about angular velocity here, https://brainly.com/question/29342095

#SPJ11

The number of whole numbers whose square roots of a natural number from 1 to 200 will be 14

The natural number of square roots from 1 to 200 are mentioned below

1² = 1,

2² = 4,

3² = 9,

4² = 16,

5² = 25,

6² = 36,

7² = 49,

8² = 64,

9² = 81,

10² = 100,

11² = 121,

12² = 144,

13² = 169,

14² = 196

The number of whole numbers = 14

Above 14 the square will be greater than 200

All the whole numbers are natural number except zero. zero is a whole number not a natural number.

To learn more about square roots click here :

https://brainly.com/question/29775049

#SPJ4

The relation of function is False.

This relation is not a function because the input value -2 is associated with two different output values (4 and -1). In a function, each input can only have one corresponding output.

To know more about function refer here:

https://brainly.com/question/21145944

#SPJ11

It is also possible that there may not be a clear relationship between the two variables or that there may be other factors that influence the number of coats sold, such as seasonal trends or fashion trends.

In mathematics, a variable is a symbol or letter that represents a quantity that can vary or take on different values in a given situation or equation. Variables are commonly denoted by letters such as x, y, z, a, b, c, etc. They are used to represent unknown or changing quantities in mathematical expressions or equations.

For example, in the equation y = 2x + 3, x and y are variables. x represents an unknown value, while y represents the value that results from the equation for a particular value of x. In this case, the variable x can take on different values, and the corresponding value of y will change accordingly.

Variables are used in a wide range of mathematical concepts, such as algebra, calculus, and statistics, to represent and manipulate different quantities and relationships between them.

It is reasonable to expect that there is a negative correlation between the number of coats sold and the outside temperature. In other words, as the temperature gets colder, the number of coats sold would increase, and as the temperature gets warmer, the number of coats sold would decrease. This is because colder temperatures would typically prompt people to buy more coats to stay warm, while warmer temperatures would make people less likely to buy coats. However, it is also possible that there may not be a clear relationship between the two variables or that there may be other factors that influence the number of coats sold, such as seasonal trends or fashion trends.

To know more about factors, visit:

https://brainly.com/question/14067703

#SPJ1

The data gathering technique used by Dr. Jackson in her study of the daily activities of 4th graders is an example of a quantitative approach. This approach involves the collection of numerical data that can be analyzed using statistical methods to identify patterns and relationships.

By asking the children to indicate the amount of time they spend on different activities, Dr. Jackson is collecting quantitative data that can be used to compare and contrast the daily routines of different children. This approach is particularly useful for identifying trends and patterns in the data, such as the amount of time spent watching television or playing video games.

Quantitative data gathering techniques are commonly used in social sciences research, including education, psychology, and sociology. They are useful for identifying patterns and trends in large data sets, and can be used to make predictions about future behavior or outcomes.

Overall, Dr. Jackson's study of the daily activities of 4th graders is an example of the quantitative approach to data gathering. By collecting numerical data on the amount of time spent on different activities, Dr. Jackson can analyze the data using statistical methods to identify patterns and trends, and make predictions about future behavior or outcomes.

To know more about jackson refer here

https://brainly.com/question/13165457#

#SPJ11

Besides the hourly wage, other important factors when choosing a job may include the job benefits, work-life balance, job security, career growth opportunities, company culture, and commute time.

While the hourly wage is a crucial aspect of a job, other factors can significantly impact job satisfaction and overall quality of life.

For example, job benefits such as health insurance, retirement plans, and paid time off can help provide financial security and peace of mind.

Work-life balance is also critical, particularly for those with family obligations. A job that offers flexible working hours or remote work options can be appealing to parents with children.

Job security is another factor that people consider when choosing a job, as it can provide stability and minimize stress.

Career growth opportunities can also be important, as they allow employees to develop their skills and advance in their careers.

Finally, company culture can play a significant role in job satisfaction, as it can impact work relationships, communication, and overall job enjoyment.

Learn more about job benefits

brainly.com/question/21184695

#SPJ11

In general, there are many factors that people consider when choosing a job beyond the hourly wage. like cultural values.growth opportunities.lifestyle, benefits like health insurance, and commutes.

and advancement possibilities.

Company culture and values

Opportunities for career growth and advancement

Location and commute

Benefits such as health insurance, retirement plans, and paid time off

Work-life balance and flexibility

Job security and stability

Opportunities for learning and development

The nature of the work itself and the level of challenge it presents

The reputation of the company or industry

Being married with children can certainly affect one's decision when choosing a job. Factors such as work-life balance, flexibility, and benefits like parental leave become more important for individuals with families. The location of the job may also be a consideration if it impacts the school district in which their children attend. Additionally, if a job requires frequent travel or long hours, it may be less desirable for someone with family responsibilities.

We can elaborate on these factors:

Company culture and values: A company's culture and values can play a significant role in job satisfaction and overall well-being. Employees may prefer a company that has a positive work environment, a sense of community, and a commitment to ethical practices and social responsibility.

Opportunities for career growth and advancement: Many employees want to feel that they have opportunities to learn new skills, take on new challenges, and advance in their careers. This can include opportunities for promotion, training and development programs, and mentorship.

Location and commute: The location of a job can have a significant impact on an individual's decision to accept an offer. Factors such as proximity to home, traffic, and accessibility of public transportation can all influence the decision.

Benefits such as health insurance, retirement plans, and paid time off: Employers who offer comprehensive benefits packages can be more attractive to potential employees. Benefits such as health insurance, retirement plans, and paid time off can be critical for individuals with families.

Work-life balance and flexibility: Many individuals prioritize jobs that offer work-life balance and flexibility. This can include flexible scheduling, remote work options, and the ability to take time off for personal reasons.

Job security and stability: Individuals may prefer jobs that offer long-term stability and security. This can be especially important during times of economic uncertainty.

Opportunities for learning and development: Many employees want to continue learning and developing their skills, so jobs that offer opportunities for professional growth and development can be very attractive.

The nature of the work itself and the level of challenge it presents: For some individuals, the nature of the work itself is the most important factor. They may prefer jobs that challenge them intellectually or that allow them to make a difference in the world.

The reputation of the company or industry: The reputation of a company or industry can influence an individual's decision to accept a job offer. For example, some individuals may be more attracted to working for a company with a strong reputation for ethical practices or environmental sustainability.

Learn more about  Jobs

brainly.com/question/31110061

#SPJ11

To determine the scale factor of the dilation between the green parallelogram and the black parallelogram, you would need to compare the corresponding side lengths of the two parallelograms. For example, if the green parallelogram has a side length that is half of the black parallelogram's side length, the scale factor would be 1/2 (Option B).

If the green parallelogram's side length is twice the black parallelogram's side length, the scale factor would be 2 (Option C). And if the green parallelogram's side length is one-third of the black parallelogram's side length, the scale factor would be 1/3 (Option A). Without specific measurements or a visual representation, it is not possible to accurately identify the scale factor between the two parallelograms. Please provide the side lengths or a diagram to help determine the correct scale factor.

For more questions like dilation visit the link below:

https://brainly.com/question/29144330

#SPJ11

The incorrect statement about the intersecting triangles is A. CG ≅ FG.

With intersecting triangles, it is not always guaranteed that segments like CG and FG will be congruent. The lengths of CG and FG will depend on the specific configuration of the chords and their intersection point G.

However, CE/EG = FD/DG statement is TRUE. This is a consequence of the Intersecting Chords Theorem. When two chords intersect inside a circle, the products of their segments are equal.

Since ∠CEG ≅ ∠FDG intersect inside a circle, the corresponding intercepted arcs create equal angles at the intersection point. Therefore the statement is true.

ΔCEG ~ ΔFDG is also true because we know that the triangles share an angle and have proportional sides.

The answer above is in response to the full question below;

In the diagram of circle A shown below , chords CD and EF intersect at G, and chords CE and FD and drawn

Which statements is not always true?

a. CG ≅ FG    

b. CE/EG = FD/ DG

c. ∠CEG ≅ FDG  

d. ΔCEG ~ ΔFDG

Find more exercises on intersecting triangles;

https://brainly.com/question/28008595

#SPJ1

Using the Law of Sines and Cosines, we get all possible values of ∠H are approximately 60.6° and 69.0°.

We can use the Law of Cosines to find the length of side GH

GH² = g² + h² - 2gh cos(G)

GH² = (9.3)² + (9.6)² - 2(9.3)(9.6)cos(109°)

GH ≈ 3.585 cm

Next, we can use the Law of Sines to find the measure of angle H

sin(H)/GH = sin(G)/HI

sin(H)/3.585 = sin(109°)/HI

sin(H) ≈ 3.585(sin 109°)/HI

H ≈ arcsin[3.585(sin 109°)/HI]

Since we do not know the length of side HI, we cannot determine the exact value of angle H. However, we can find the possible range of angle H by assuming that HI is the longest side of the triangle (making angle H the smallest) and the shortest side of the triangle (making angle H the largest).

If HI is the longest side, then H ≈ arcsin[3.585(sin 109°)/9.3] ≈ 60.6°

If HI is the shortest side, then H ≈ arcsin[3.585(sin 109°)/9.6] ≈ 69.0°

Therefore, the possible values of angle H are between approximately 60.6° and 69.0°.

To know more about Triangle:

https://brainly.com/question/19976619

#SPJ4

The value of x in the variation is -2/9

y varies inversely as x and the value of y is 18 and x is 1/2

the first step is to calculate the constant k

k= y/x

k= 18 ÷ 1/2

k= 18 × 2/1

k= 36

From the calculation above the value of k which is the constant is 36

The next step is to calculate x. The value of x can be calculated as follows

k = y/x

36= -10/x

cross multiply

36x= -10

x= -10/36

x= -2/9

Hence the value of x in the variation is -2/9

Read more on variation here

https://brainly.com/question/2272305

#SPJ1

The expression that represents a strategy for estimating the farm's output for 2015 is 1.153w, where w is the farm's wheat output in 2013.

Let w be the farm's wheat output in 2013. We know that the output increased by 9.8% from 2013 to 2014, so the output in 2014 can be estimated as:

w + 0.098w = 1.098w

This expression represents a strategy for estimating the farm's output for 2014.

Similarly, the output in 2015 can be estimated as:

(1.098w) + 0.051(1.098w) = (1 + 0.051)(1.098w)

Simplifying this expression, we get:

1.153w

Therefore, the expression that represents a strategy for estimating the farm's wheat output for 2015 is:

1.153w

where w is the farm's wheat output in 2013 (i.e., 19.8 tons).

So we can estimate the farm's wheat output in 2015 as:

1.153(19.8) = 22.82 tons (rounded to two decimal places)

Note that this is only an estimate, based on the assumption that the percentage increases from 2013 to 2014 and from 2014 to 2015 will continue to hold in the future.

Know more about expression here:

https://brainly.com/question/1859113

#SPJ11

The first hotel is approximately 0.6246 meters away from the dock, and the second hotel is approximately 0.4931 meters away from the dock.

To solve this problem, we can use trigonometry and create a system of equations based on the given angles and distances. Let's assume the distance between the dock and the first hotel is x meters and the distance between the dock and the second hotel is y meters.

Using the law of sines, we can relate the angles and distances:

For the first hotel:

sin(49°) = y / x     ...(Equation 1)

For the second hotel:

sin(56°) = x / y     ...(Equation 2)

We can rearrange Equation 1 to solve for y:

y = x * sin(49°)

Substituting this value of y into Equation 2:

sin(56°) = x / (x * sin(49°))

sin(56°) = 1 / sin(49°)

Now, we can solve for x by isolating it:

x = sin(56°) * sin(49°)

Plugging in the values and evaluating the equation:

x = 0.8290 * 0.7539

x ≈ 0.6246

Therefore, the distance between the dock and the first hotel (x) is approximately 0.6246 meters.

To find the distance between the dock and the second hotel (y), we can substitute this value back into Equation 1:

y = 0.6246 * sin(49°)

y ≈ 0.4931

Hence, the distance between the dock and the second hotel (y) is approximately 0.4931 meters.

In summary, the first hotel is approximately 0.6246 meters away from the dock, and the second hotel is approximately 0.4931 meters away from the dock.

To know more about dock, refer here :

https://brainly.com/question/30335091#

#SPJ11

Answer: To determine if the series –128 + 96 – 72 + 54 – ... is a geometric series, we need to check if the ratio between consecutive terms is constant.

Let's calculate the ratio between the second and first terms:

96 / (-128) = -3/4

Now let's calculate the ratio between the third and second terms:

-72 / 96 = -3/4

The ratio between the fourth and third terms is:

54 / (-72) = -3/4

We can see that the ratio between consecutive terms is always the same: -3/4. Therefore, the series –128 + 96 – 72 + 54 – ... is a geometric series with a common ratio of -3/4.

So the answer is r equals negative three fourths.

Step-by-step explanation:

The series provided is a geometric series because each term after the first is found by multiplying the previous term by -3/4. Therefore, the common ratio 'r' equals -3/4.

In a geometric series, each term after the first is found by multiplying the previous term by a fixed, non-zero number called the common ratio. In the series given –128 + 96 – 72 + 54 – …, the second term (96) divided by the first term (-128) equals -3/4, the third term (-72) divided by the second term (96) also equals -3/4, and so on. This constant ratio between successive terms demonstrates that this is indeed a geometric series. Therefore, the statement that proves this is a geometric series is 'r equals negative three fourths' where r represents the common ratio.

https://brainly.com/question/34429025

#SPJ6

45% is the experimental probability that only 1 of 4 children in a family is a girl.

To find the experimental probability that only 1 of 4 children in a family is a girl, we need to count the number of times this outcome occurs in the sample and divide it by the total number of outcomes. In this case, we have 20 coin tosses, and we are looking for sequences with exactly 1 "tails" (girl) and 3 "heads" (boys).

Here are the sequences with exactly 1 girl:
HTHH
HHTT
HHHT
THHT
HTTH
TTHH
THTT
TTHH
THTT

There are 9 such sequences out of the total 20 coin tosses. Therefore, the experimental probability is:

(9/20) * 100% = 45%

The experimental probability that only 1 of 4 children in a family is a girl is 45%.

More on probability: https://brainly.com/question/29179030

#SPJ11