Dalton's Law and the Ideal Gas Law


At what pressure will 4. 80 moles of fluorine gas have a volume of 60. 0 liters and a temperature of 298 K?

The cost of electricity for the device left on for 8.0 hours is 3.52 cents.

To find the cost of electricity for the device, first, we need to calculate the power consumption, then the total energy consumed, and finally the cost.

1. Calculate the power consumption:

Power (P) = Voltage (V) x Current (I)
P = 110 volts x 0.50 amperes = 55 watts

2. Calculate the total energy consumed:

Energy (E) = Power (P) x Time (t)
E = 55 watts x 8.0 hours = 440 watt-hours = 0.44 kilowatt-hours (kWh)

3. Calculate the cost:

Cost = Energy (E) x Rate
Cost = 0.44 kWh x 8 cents/kWh = 3.52 cents

The cost of electricity for the device left on for 8.0 hours is 3.52 cents.

To know more about cost of electricity refer here: https://brainly.com/question/28800300#

#SPJ11

The main difference between Galileo's work and previous scientist work is, that Galileo was a scientist who believed in the scientific method rather than abstract theory.

Galileo was a scientist who help in discovering a technological telescope to capture the movement of planets and stars. He has contributed to the field of physics, mathematics, philosophy, and so on. He worked over scientific theory rather than the abstract theory used by other scientists. The scientific theory emphasizes more real-life incidents, facts, and explanations behind any work. Abstract theory is based on the general ideas, assumptions, and thinking of any individual about a subject or incident.

To know more about Galileo here

https://brainly.com/question/19040804

#SPJ4

The covalent radius of atom X in an XY molecule with a bond length of 212 and covalent radius of Y atom being 93 is 119.

To find the covalent radius of atom X, we need to understand that the bond length of an XY molecule is equal to the sum of the covalent radii of atoms X and Y. We can represent this relationship using the formula: bond length = covalent radius of X + covalent radius of Y.

Given that the bond length of the XY molecule is 212, and the covalent radius of Y is 93, we can use the formula to find the covalent radius of X:

212 = covalent radius of X + 93

To find the covalent radius of X, we can simply subtract the covalent radius of Y from the bond length:

covalent radius of X = 212 - 93

covalent radius of X = 119

So, the covalent radius of atom X is 119.

To know more about covalent radius click on below link:

https://brainly.com/question/14656068#

#SPJ11

First, let's determine the moles of aniline in the initial 68.3 mL of 0.3400 M solution:

moles of aniline = 0.3400 mol/L × 0.0683 L = 0.02326 mol

Next, let's determine the moles of HIO3 added to the solution:

moles of HIO3 = 0.6100 mol/L × 0.0421 L = 0.02568 mol

Since HIO3 is a strong acid, it will completely react with aniline to form its conjugate acid, C6H5NH3+, and iodate ion, IO3-. This reaction can be represented as:

C6H5NH2 + HIO3 → C6H5NH3+ + IO3-

The moles of aniline that have reacted with HIO3 can be calculated as the difference between the initial moles of aniline and the moles of HIO3 added:

moles of aniline reacted = 0.02326 mol - 0.02568 mol = -0.00242 mol

Since the reaction goes to completion, the moles of C6H5NH3+ formed will be equal to the moles of HIO3 added, which is 0.02568 mol.

To calculate the concentration of C6H5NH3+ in the final solution, we need to divide the moles of C6H5NH3+ by the total volume of the solution:

final volume = 68.3 mL + 42.1 mL = 110.4 mL = 0.1104 L

[C6H5NH3+] = moles of C6H5NH3+ / final volume

[C6H5NH3+] = 0.02568 mol / 0.1104 L = 0.2329 M

To calculate the pH of the final solution, we need to first calculate the pKa of the C6H5NH3+ / C6H5NH2 conjugate acid-base pair:

pKa = pKb + log([H3O+]/[C6H5NH2])

At equilibrium, the concentration of C6H5NH3+ will be equal to the concentration of C6H5NH2, so we can simplify the equation:

pKa = pKb + log([H3O+]/[C6H5NH3+])

pKb = 9.37 (given)

Since the solution is acidic, we can assume that [H3O+] << [C6H5NH3+], so we can neglect the contribution of [H3O+] to the pH:

pH = pKa + log([C6H5NH2]/[C6H5NH3+])

pH = 9.37 + log(0.2329/0.02568)

pH = 9.37 + 1.662

pH = 11.03

Therefore, the pH of the final solution is 11.03.

To know more about aniline refer here

https://brainly.com/question/31081529#

#SPJ11

When CO₂ is heated from 15°C to 37°C, its molar internal energy changes by 2446.2 J/mol, as does its molar enthalpy.

The following equation can be used to determine how carbon dioxide (CO₂) will change in molar enthalpy and molar internal energy when heated from 15 to 37 degrees Celsius:

ΔH = ΔU + ΔnRT

ΔU = nCvΔT

where:

ΔH = change in molar enthalpy of CO₂ (in J/mol)

ΔU = change in molar internal energy of CO₂ (in J/mol)

Δn = change in moles of CO₂ (in mol)

R = universal gas constant (8.314 J/(mol·K))

T = temperature (in K)

Cv = molar heat capacity at constant volume (in J/(mol·K))

ΔT = change in temperature (in K)

First, let's calculate the change in temperature:

ΔT = T2 - T1

= (37 + 273.15) K - (15 + 273.15) K

= 22 K

Next, let's calculate the change in molar internal energy:

ΔU = nCvΔT

= 3 mol × 37.1 J/(mol·K) × 22 K

= 2446.2 J/mol

Now, let's calculate the change in molar enthalpy using the equation:

ΔH = ΔU + ΔnRT

where Δn = 0 because the number of moles of CO₂ does not change during heating. Therefore:

ΔH = ΔU + ΔnRT

= 2446.2 J/mol + 0 mol × 8.314 J/(mol·K) × (37 + 273.15) K

= 2446.2 J/mol

To know more about molar enthalpy, refer:

https://brainly.com/question/30627521

#SPJ4

During a solar eclipse, the Moon is blocking the light from the Sun so a shadow appears on the Earth.

What is Solar eclipse?

A solar eclipse occurs when the Moon passes between the Sun and the Earth, and as a result, the Moon casts a shadow on the Earth's surface. This happens only during a New Moon phase, when the Moon is on the same side of the Earth as the Sun and its shadow falls on the Earth's surface.

There are two types of shadows that the Moon casts on the Earth during a solar eclipse: the umbra and the penumbra. The umbra is the darker central region of the shadow where the Sun is completely blocked by the Moon, while the penumbra is the lighter outer region where the Sun is only partially blocked by the Moon.

Learn more about Solar eclipse, visit;

https://brainly.com/question/1077760

#SPJ4

310.56 grams of sodium sulfate will be formed if you start with 175.0 grams of sodium hydroxide and have an excess of sulfuric acid.

To determine how many grams of sodium sulfate will be formed starting with 175.0 grams of sodium hydroxide and an excess of sulfuric acid, follow these steps:

1. Write the balanced chemical equation: 2 NaOH + H2SO4 → Na2SO4 + 2 H2O

2. Calculate the molar mass of sodium hydroxide (NaOH): (22.99 g/mol for Na) + (15.99 g/mol for O) + (1.01 g/mol for H) = 40.00 g/mol

3. Calculate the moles of sodium hydroxide (NaOH): 175.0 g / 40.00 g/mol = 4.375 moles

4. Determine the mole ratio between sodium hydroxide (NaOH) and sodium sulfate (Na2SO4): From the balanced equation, 2 moles of NaOH react to produce 1 mole of Na2SO4.

5. Calculate the moles of sodium sulfate (Na2SO4) produced: (4.375 moles NaOH) x (1 mole Na2SO4 / 2 moles NaOH) = 2.1875 moles Na2SO4

6. Calculate the molar mass of sodium sulfate (Na2SO4): (2 x 22.99 g/mol for Na) + (32.07 g/mol for S) + (4 x 16.00 g/mol for O) = 142.04 g/mol

7. Calculate the mass of sodium sulfate (Na2SO4) formed: (2.1875 moles Na2SO4) x (142.04 g/mol) = 310.56 grams

Therefore, 310.56 grams of sodium sulfate will be formed if you start with 175.0 grams of sodium hydroxide and have an excess of sulfuric acid.

To know more about sodium sulfate refer here: https://brainly.com/question/14464099#

#SPJ11

To manipulate seven additional data sets and place these values in your Ocean Interactions, follow these steps:
Step 1: Obtain the data sets
First, acquire the seven additional data sets that you want to include in your Ocean Interactions analysis. These data sets could be related to variables such as temperature, salinity, ocean currents, or marine life distributions.

Step 2: Organize the data
Next, organize the data sets by sorting, filtering, or aggregating them as needed to make them more manageable for analysis. This process may involve cleaning the data to remove any inconsistencies or errors, as well as converting the data into a compatible format for further manipulation.

Step 3: Manipulate the data
Using various data manipulation techniques, transform the additional data sets to create new variables or features that can help provide a deeper understanding of the Ocean Interactions. This manipulation could include calculations, statistical analysis, or creating visual representations to identify patterns or trends within the data.

Step 4: Integrate the data
Combine the manipulated additional data sets with the existing Ocean Interactions data to create a comprehensive analysis. This integration process may involve merging or joining data sets based on common variables or geographical locations, ensuring that the resulting data accurately reflects the interactions between various ocean-related factors.

Step 5: Analyze the data
With the additional data sets now integrated into your Ocean Interactions analysis, examine the relationships between the different variables to gain insights into the complex dynamics at play. This analysis could involve statistical tests, correlations, or predictive modeling techniques to better understand the underlying patterns and trends in the data.

Step 6: Interpret the results
Based on the analysis, draw conclusions about the role of the additional data sets in the overall Ocean Interactions. This interpretation should consider the potential implications of these findings for the broader understanding of ocean processes and the management of marine ecosystems.

By following these steps, you will successfully manipulate seven additional data sets and place these values in your Ocean Interactions analysis, enhancing your understanding of the complex dynamics involved in the marine environment.

To know more about Ocean Interactions refer here

https://brainly.com/question/30919252#

#SPJ11

D. Grasslands are converted to cropland

As the human population grows, individuals use land in a variety of ways to suit their requirements, including housing, agriculture, industry, and transportation.

This usually results in more urbanization and the change of natural habitats to human-dominated environments. Some examples of common land-use shifts are:

D. Grasslands are converted to cropland: As food need grows, grasslands are frequently converted to cropland for agricultural production. This can result in soil degradation, biodiversity loss, and other environmental consequences.

As the human population expands, so does the need for resources and space, resulting in a variety of changes in land usage. The conversion of natural habitats such as forests and grasslands into human-dominated landscapes is one of the major land-use shifts.

This process, referred to as urbanization, frequently includes the creation of buildings, roads, and other infrastructure to support human activity. Furthermore, as the demand for food and other agricultural products grows, more land is converted to agriculture.

These land-use changes can have serious environmental consequences, such as habitat loss, soil degradation, and biodiversity loss. As a result, it is critical to think about the potential repercussions of land usage and design sustainable practices that balance human demands with environmental conservation.

learn more about the population here

https://brainly.com/question/29367909

#SPJ1

When hydrogen and steam are both present in a gas at the same pressure and temperature, this is the ideal gas condition. This is so because according to the ideal gas law, an ideal gas's pressure, volume, and temperature are all precisely proportional to one another.

This indicates that when the two gases have the same temperature and pressure, the two gases will also have the same volume. As a result, the gases are in their ideal state, having the same volume and pressure but retaining their distinct chemical compositions.

This is perfect because it enables the two gases to interact with one another in a predictable way, allowing for the measurement and prediction of the gases' behaviour.

Learn more about  gases  at:

https://brainly.com/question/1369730

#SPJ1

Answer:

NaHCO3 + HCl → NaCl + H2O + CO2

Explanation:

The net ionic equation for the equilibrium that is established when sodium cyanide (NaCN) is dissolved in water is:

NaCN + H2O ⇌ CN- + Na+ + H2O

In this equation, the cyanide ion (CN-) is produced by the dissociation of NaCN in water. The sodium ion (Na+) and water (H2O) are spectator ions and do not participate in the reaction. Therefore, they are not included in the net ionic equation.

This solution is basic because the cyanide ion is a weak base and can hydrolyze water to produce hydroxide ions (OH-) according to the following reaction:

CN- + H2O ⇌ HCN + OH-

The equilibrium constant for this reaction is relatively small, but it is enough to make the solution basic.

Visit here to learn more about ionic equation brainly.com/question/29299745

#SPJ11

Concentration of Pb2+ in the anode compartment is 0.088 M
To answer this question, we'll need to use the Nernst equation, which relates the cell potential (emf) to the concentrations of the species involved in the redox reaction. The Nernst equation is:

E = E₀ - (RT/nF) * ln(Q)

Where E is the cell potential (emf, 0.21 V), E₀ is the standard cell potential, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (assumed to be 298 K), n is the number of electrons transferred in the redox reaction (2 for Sn and Pb), F is Faraday's constant (96485 C/mol), and Q is the reaction quotient, which is the ratio of the concentrations of products to reactants.

For the Sn2+/Pb2+ system, the standard cell potential (E₀) is given by the difference in their standard reduction potentials:

E₀(Sn2+/Pb2+) = E₀(Sn2+) - E₀(Pb2+)

To solve for the concentration of Pb2+ in the anode compartment, we need to rearrange the Nernst equation to find Q:

Q = exp(nF(E - E₀)/RT)

As we are given the concentration of Sn2+ (1.30 M), and we know the stoichiometry of the redox reaction, we can express Q as:

Q = [Pb2+] / [Sn2+]

Now, we can solve for [Pb2+]:

[Pb2+] = Q * [Sn2+] = exp(nF(E - E₀)/RT) * [Sn2+]

Substituting the values into the equation above, we get:

[Pb2+]/1.30 = exp[(0.01 - 0.21) * (2 * 96485 / (8.314 * 298))]

Solving for [Pb2+], we get:

[Pb2+] = 0.088 M

Therefore, the concentration of Pb2+ in the anode compartment is 0.088 M.

Once you have the values for E₀(Sn2+) and E₀(Pb2+), you can plug them into the equation along with the given values to find the concentration of Pb2+ in the anode compartment.

To know more about Electrochemical cell:

https://brainly.com/question/25749323

#SPJ11

Concentration of lead in Saplingville's drinking water: 6.28 x 10^-11 mol/L.

To calculate the concentration of lead in molarity, we need to follow these steps:

1. Convert ppb (parts per billion) to grams per liter (g/L)
2. Determine the molar mass of lead (Pb)
3. Calculate molarity using the formula: Molarity = (mass in grams / molar mass) / volume in liters

1. Conversion from ppb to g/L:
13 ppb = 13 micrograms/L (µg/L), since 1 ppb = 1 µg/L
13 µg/L = 13 x 10^-9 g/L (since 1 µg = 10^-9 g)

2. Molar mass of lead (Pb) is approximately 207.2 g/mol.

3. Calculate molarity:
Molarity = (13 x 10^-9 g/L) / (207.2 g/mol)
Molarity ≈ 6.28 x 10^-11 mol/L

The concentration of lead in Saplingville's drinking water is approximately 6.28 x 10^-11 mol/L.

To know more about ppb calculations:

https://brainly.com/question/31055662

#SPJ11

The number of moles present in 6.50g of ZnSO4 is 0.0403 moles.

The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:

no of moles = mass ÷ molar mass

According to this question, 6.50 grams of zinc sulphate is given. The number of moles in the substance can be calculated as follows:

molar mass of zinc sulphate = 161.47 g/mol

no of moles = 6.50g ÷ 161.47 g/mol

no of moles = 0.0403 moles

Learn more about moles at: https://brainly.com/question/20928252

#SPJ1

Assuming ideal gas behavior, the pressure in the winter at -30.0 °C would be approximately 166.3 kPa.

The pressure of a gas is directly proportional to its temperature, according to the ideal gas law.

Therefore, if the temperature of the gas inside a car tire changes, the pressure will change as well, assuming the volume remains constant.

To solve this problem, we can use the combined gas law, which relates the pressure, temperature, and volume of a gas. The formula is:

[tex]P1/T1 = P2/T2[/tex]

where P1 and T1 are the initial pressure and temperature, respectively, and P2 and T2 are the final pressure and temperature.

Using this formula, we can solve for the final pressure as follows:

[tex]P2 = (P1*T2)/T1[/tex]

Plugging in the values given in the problem, we get:

[tex]P2 = (310 kPa * (-30.0 + 273.15) K) / (25.0 + 273.15) K[/tex]

P2 = 166.3 kPa

Therefore, the pressure inside the car tire in winter at -30.0 °C is 166.3 kPa. This represents a decrease in pressure compared to the summer pressure of 310 kPa.

It is important to note that the ideal gas law assumes that the volume remains constant, which may not be the case in real-world situations where the volume of a tire can change due to various factors such as wear and tear.

For more such questions on pressure, click on:

https://brainly.com/question/24719118

#SPJ11

Answer:To determine the number of valence electrons in an atom of a representative element, you can look at its position on the periodic table. Representative elements are also known as the main group elements and are located in groups 1-2 and 13-18 of the periodic table.

The number of valence electrons in an atom of a representative element is equal to the group number. For example, the elements in group 1 (also known as the alkali metals) have 1 valence electron, while the elements in group 2 (the alkaline earth metals) have 2 valence electrons. The elements in group 13 (the boron group) have 3 valence electrons, and so on, up to group 18 (the noble gases), which have a full set of 8 valence electrons (except for helium, which has only 2).

For example, let's consider the element sodium (Na), which is in group 1. Sodium has 1 valence electron because it is in group 1. Similarly, the element carbon (C), which is in group 14, has 4 valence electrons because it is in group 14.

Knowing the number of valence electrons in an atom is important because it helps to determine the chemical properties and reactivity of the element. Atoms with the same number of valence electrons tend to have similar chemical properties and can form similar types of chemical bonds.

Explanation:

Answer: B. Energy

Explanation: The matter is converted into energy, which is released in the form of radiation, this is due to the fact that the mass of the products of the reaction is less than the mass of the reactants, and this difference in mass is converted into energy. Aka ([tex]E=mc^{2}[/tex]).

The gas laws are a set of fundamental principles that describe the behavior of gases under different conditions of pressure, volume, and temperature. We can use the ideal gas law to solve this problem:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:

T = 0.00 C + 273.15 = 273.15 K

Next, we can plug in the values we have:

P(22.4 L) = (1.00 mol)(0.0821 L·atm/mol·K)(273.15 K)

Simplifying:

P = (1.00 mol)(0.0821 L·atm/mol·K)(273.15 K)/(22.4 L)

P = 1.01 atm

Therefore, the helium will exert a pressure of 1.01 atm on its container.

For more question on gas laws

https://brainly.com/question/4147359

#SPJ11

There are approximately 0.00614 moles of gas in the sample.

To find the number of moles of gas in the sample, we will use the Ideal Gas Law formula: PV = nRT.

Given:
Volume (V) = 155 mL = 0.155 L (converted to liters)
Temperature (T) = 316 K
Pressure (P) = 0.989 atm
Gas constant (R) = 0.0821 L atm / K mol

We need to find the number of moles (n).

Rearranging the formula for n: n = PV / RT


1. Convert the volume to liters: 155 mL = 0.155 L
2. Plug in the given values into the formula: n = (0.989 atm) x (0.155 L) / (0.0821 L atm / K mol) x (316 K)
3. Simplify the equation and solve for n: n ≈ 0.00614 mol

To know more about Ideal Gas Law click on below link:

https://brainly.com/question/28257995#

#SPJ11

The wave speed is 6 m/s.

The frequency of the wave is given as 2 Hz, which means that two wavelengths pass a given point each second. The distance between wave crests (wavelength) is given as 3 m.

The distance between wave crests is the wavelength (λ), which is 3 m in this case. The frequency (f) is given as two wavelengths passing a given point each second, so f = 2 Hz.

Using the formula:

We can plug in the values to get:

Therefore, the wave speed is 6 m/s.

To learn more about Wave speed, here

https://brainly.com/question/31682106

#SPJ4

When 90 g of silver reacts with 0.280 g of hydrogen sulphide and 0.160 g of oxygen, approximately 1.018 grams of silver sulphide are formed.

To determine how many grams of silver sulphide (Ag2S) are formed when 90 g of silver (Ag) reacts with 0.280 g of hydrogen sulphide (H2S) and 0.160 g of oxygen (O2), follow these steps:

1. Calculate the moles of each reactant using their molar masses:
- Silver (Ag): 90 g / (107.87 g/mol) ≈ 0.834 moles
- Hydrogen Sulphide (H2S): 0.280 g / (34.08 g/mol) ≈ 0.00821 moles
- Oxygen (O2): 0.160 g / (32.00 g/mol) ≈ 0.00500 moles

2. Determine the limiting reactant using the stoichiometry of the balanced chemical equation:
- Ag: 0.834 moles / 4 = 0.2085
- H2S: 0.00821 moles / 2 = 0.00411
- O2: 0.00500 moles / 1 = 0.00500

The smallest value is 0.00411, which corresponds to H2S, making it the limiting reactant.

3. Calculate the moles of Ag2S produced using the stoichiometry from the balanced chemical equation:
- Moles of Ag2S = 0.00411 moles H2S × (2 moles Ag2S / 2 moles H2S) = 0.00411 moles Ag2S

4. Convert the moles of Ag2S to grams using its molar mass (247.87 g/mol):
- Grams of Ag2S = 0.00411 moles Ag2S × 247.87 g/mol = 1.018 g Ag2S

So, when 90 g of silver reacts with 0.280 g of hydrogen sulphide and 0.160 g of oxygen, approximately 1.018 grams of silver sulphide are formed.

To know more about silver sulphide refer here: https://brainly.com/question/12753006#

#SPJ11

The average rate of reaction for the time interval from 180s to 300s is 0.00083 M/s.

To calculate the average rate of reaction for a given time interval, we need to know the change in the concentration of a reactant or product over that time period. Let's assume that we have that information.

The average rate of reaction from 180s to 300s can be calculated using the following formula:

average rate = (change in concentration)/(change in time)

Let's say that the concentration of a product increased from 0.05 M to 0.15 M over the time interval from 180s to 300s. The change in concentration is:

change in concentration = final concentration - initial concentration

change in concentration = 0.15 M - 0.05 M

change in concentration = 0.10 M

The change in time is:

change in time = final time - initial time

change in time = 300 s - 180 s

change in time = 120 s

Now we can substitute these values into the formula to find the average rate of reaction:

average rate = (change in concentration)/(change in time)

average rate = (0.10 M)/(120 s)

average rate = 0.00083 M/s

Therefore, the average rate of reaction for the time interval from 180s to 300s is 0.00083 M/s.

Learn more about Average rate at

brainly.com/question/12395856

#SPJ4

To calculate the shear stress required to deform benzene at a velocity gradient of 4900 s-1, we can use the equation:

Shear stress = viscosity x velocity gradient

Plugging in the given values, we get:

Shear stress = 0.000651 Pa. S x 4900 s-1

Shear stress = 3.19 Pa

Therefore, a shear stress of 3.19 Pa is required to deform benzene at a velocity gradient of 4900 s-1.

What is Shear stress?

Shear stress is a type of stress that occurs when a force is applied parallel to a surface or along a plane within a material. It is the result of the force causing the material to deform or change shape, with one part of the material sliding or shearing over another part.

Shear stress is often described in terms of the shear force per unit area, or shear strength, that is required to cause the material to shear or deform. The unit of measurement for shear stress is typically in pascals (Pa) or pounds per square inch (psi).

To know more about Shear stress:

https://brainly.com/question/12910262

#SPJ11

Atomic mass unit (amu) is used to describe atomic mass, with the symbols "u" or "Da" used to represent it. Carbon-12 was used as the reference element to define the atomic mass unit. A spectrometer can be used to determine the elements found in an unknown substance.

Latitude affect climate because the closer to the equator, the warmer it gets. The correct answer is B.

The temperature rises as one goes nearer to the equator. One of the key elements that influences climate is latitude. The amount of solar radiation received per unit area rises as you get towards the equator. This raises the temperature and increases evaporation, which causes an increase in precipitation. As a result, the equator's vicinity is typically characterized by a tropical or subtropical climate, marked by warm temperatures and high humidity.

The amount of solar energy received per unit area drops as you move further from the equator, resulting in colder temperatures and less evaporation, which in turn causes less precipitation. As a result, the climate is often colder, with lower temperatures and less humidity, in regions close to the poles.

Learn more on the equator here https://brainly.com/question/1264608

#SPJ1

Based on scientific reasoning, the correct student is Student 1.

The Gibbs Free Energy is negative for both reactions because they are spontaneous, meaning they occur naturally without the need for external input. This indicates that the reactions release energy and are thermodynamically favorable.

Student 2's reasoning is incorrect because the temperature change alone does not determine the Gibbs Free Energy.

Student 3's reasoning is also incorrect because the Gibbs Free Energy can be both positive and negative depending on the reaction conditions. Therefore, Student 1's explanation aligns with the laws of thermodynamics and is scientifically accurate.

To know more about Gibbs Free Energy click on below link:

https://brainly.com/question/13318988#

#SPJ11

The concentration of the diluted solution is 2.67 M. The student diluted the stock solution by adding 20 mL of distilled water to the 10 mL of 8.0 M sodium sulfide solution.

To find the concentration of the diluted solution, we can use the equation:

M1V1 = M2V2

Where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Substituting the values given, we get:

M1 = 8.0 M

V1 = 10.0 mL

V2 = 10.0 mL + 20.0 mL = 30.0 mL

M2 = ?

Using the equation and solving for M2, we get:

M2 = (M1V1) / V2

M2 = (8.0 M x 10.0 mL) / 30.0 mL

M2 = 2.67 M

Therefore, the concentration of the diluted solution is 2.67 M.

To know more about the stock solution refer here :

https://brainly.com/question/25256765#

#SPJ11