The distance from the central maximum to the first-order minimum along a wall 6.50 m from the window is approximately 0.764 m.
To solve this problem, we can use the equation for the distance between adjacent maxima or minima in a single-slit diffraction pattern:
d*sin(theta) = m*lambda
where d is the width of the slit (in this case, the width of the window), theta is the angle between the direction of the diffracted wave and the direction of the incident wave, m is the order of the maximum or minimum (0 for the central maximum, 1 for the first-order minimum, 2 for the second-order maximum, etc.), and lambda is the wavelength of the microwaves.
We can rearrange this equation to solve for the distance between the central maximum and the first-order minimum:
sin(theta) = m*lambda/d
For the first-order minimum, m = 1. Plugging in the given values, we get:
sin(theta) = (1)*(5.00 cm)/(45.0 cm) = 0.111
To find the angle theta, we can use the small-angle approximation:
theta = sin(theta) = 0.111
Now we can use basic trigonometry to find the distance from the window to the first-order minimum on the wall:
tan(theta) = opposite/adjacent
opposite = tan(theta)*adjacent = tan(0.111)*(6.50 m) = 0.764 m
To learn more about : distance
https://brainly.com/question/26550516
#SPJ11
Draw a force diagram, find any resultant force and describe the object's motion.
a. An object with mass of 4kg, lying on a rough table, is acted upon by a horizontal
force of 25N. The object experiences a frictional force of 15N.
An object with a mass of 4kg, lying on a rough table, experiences a frictional force of 15N and a horizontal force of 25N, resulting in a net force of 10N, causing the object to accelerate to the right with an acceleration of 2.5 m/s².
Normal force Frictional force (15N)
The normal force points upwards and is equal in magnitude to the weight of the object (mg = 4kg * 9.81m/s² = 39.24N) since the object is not accelerating in the vertical direction.
The frictional force points to the left and is equal in magnitude to the force applied to the object (15N = 25N), indicating that the object is not moving horizontally.
The resultant force is found by subtracting the frictional force from the applied force:
F_net = F_applied - F_friction = 25N - 15N = 10N
The object will accelerate to the right with an acceleration of:
a = F_net/m = 10N/4kg = 2.5 m/s²
Therefore, the object will move to the right with increasing speed.
Learn more about Frictional force here:
https://brainly.com/question/4618599
#SPJ1
A 5 kg bowling ball is at rest next to an 8 kg bowling ball. Rory thinks it would be a good idea to put an M80 between them and see what happens after the explosion. Since he is working by himself, he can only measure the speed of one ball. He calculates that the speed of the 5 kg ball is 1. 3 m/s to the left. What must the speed of the 8 kg ball be?
The speed of the 8 kg ball must be 0.83 m/s to the right.
To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of a system of objects is conserved if no external forces act on the system. Before the explosion, the total momentum of the system is zero since both balls are at rest.
After the explosion, the total momentum of the system is still zero, so the momentum of the 5 kg ball to the left must be balanced by the momentum of the 8 kg ball to the right. We can use the formula for momentum, which is momentum = mass x velocity. Let v be the velocity of the 8 kg ball after the explosion.
Then we have
5 kg x (-1.3 m/s) + 8 kg x v = 0
Solving for v, we get:
v = (5 kg x 1.3 m/s) / 8 kg = 0.8125 m/s
Since the velocity is to the right, we get:
v = 0.83 m/s to the right.
To know more about the Speed, here
https://brainly.com/question/31241752
#SPJ4
how is charged particles related to electric current, electric circuits, and resistance
Charged particles are fundamental to the behavior of electric currents, electric circuits, and resistance. An electric current is the flow of charged particles, typically electrons, through a conductor.
The flow of charged particles generates an electric field that induces a potential difference, or voltage, across the conductor.Electric circuits are constructed by connecting conductors and electrical components, such as resistors, capacitors, and inductors, in a specific configuration. The arrangement of the components determines how the current flows through the circuit.
The flow of current through the circuit depends on the resistance offered by the components in the circuit and the potential difference across the circuit.Resistance is the property of a conductor that opposes the flow of current. The resistance of a conductor is proportional to the number of charged particles in the conductor, the length of the conductor, and the cross-sectional area of the conductor. The resistance can also be affected by the temperature of the conductor and its material properties.
In summary, charged particles are responsible for generating electric currents that flow through electrical circuits. The behavior of the currents is determined by the arrangement of the components in the circuit and the resistance offered by the conductors and components. Resistance is a fundamental property of a conductor that opposes the flow of charged particles and can be affected by various factors.
For more such questions on resistance visit:
https://brainly.com/question/7669692
#SPJ11
a parallel-plate capacitor with only air between its plates is charged by connecting the capacitor to a battery. the capacitor is then disconnected from the battery, without any of the charge leaving the plates. (a) a voltmeter reads 51.0 v when placed across the capacitor. when a dielectric is inserted between the plates, completely filling the space, the voltmeter reads 12.1 v. what is the dielectric constant of the material?
The dielectric constant of the material is 3.38.
The capacitance of a parallel-plate capacitor with air between its plates is given by:
C = ε0 A / d, where ε0 is the permittivity of free space, A is the area of the plates, and d is the distance between the plates.
When a dielectric is inserted between the plates, the capacitance increases according to:
C' = k ε0 A / d, where k is the dielectric constant of the material.
From the given information, we can use the equation:
C' = V / Q, where V is the potential difference across the plates and Q is the charge on the plates. Initially, when there is air between the plates, the potential difference is 51.0 V. When the dielectric is inserted, the potential difference drops to 12.1 V, but the charge on the plates remains the same.
Therefore, we can write:
C' = V / Q = 12.1 V / Q = k (51.0 V / Q) = 51.0 k / C,
where C is the initial capacitance (with air between the plates).
Solving for k, we get:
k = C' / C = (12.1 V / Q) / (51.0 V / Q) = 0.2373.
Using the equation for the capacitance with a dielectric, we can also write:
C' = k ε0 A / d,
which gives us:
k = C' d / (ε0 A) = 3.38.
As a result, the material's dielectric constant is 3.38.
To know more about the Parallel Plate Capacitor, here
https://brainly.com/question/24213844
#SPJ4
The speakers in a sports stadium are
89. 5 m from a fan's seat. How much
time does it take sound to travel from
the speakers to the fan's seat?
Speed of sound = 343 m/s
(Unit = s)
This is also one I am confused on
The speakers in a sports stadium are 89. 5 m from a fan's seat. It takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.
The time it takes for sound to travel from the speakers to the fan's seat can be calculated using the formula
Time = distance / speed
Where distance is the distance between the speakers and the fan's seat, and speed is the speed of sound in air.
In this case, the distance between the speakers and the fan's seat is 89.5 m, and the speed of sound in air is 343 m/s (at standard temperature and pressure).
Plugging in these values into the formula, we get
Time = 89.5 m / 343 m/s
Time = 0.261 seconds
Therefore, it takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.
To know more about time here
https://brainly.com/question/22594054
#SPJ4
A plate falls vertically to the floor and breaks up into three pieces, which slide along the floor. Immediately after the impact, a 320-g piece moves along the x-axis with a speed of 2. 00 m/s and a 355-g piece moves along the y-axis with a speed of 1. 50 m/s. The third piece has a mass of 100 g. In what direction does the third piece move? you can neglect any horizontal forces during the crash.
The third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.
We can start the problem by using conservation of momentum. The momentum before the impact is zero since the plate is at rest, and the momentum after the impact is the sum of the momenta of the three pieces.
Since there are no horizontal forces during the crash, the total momentum is conserved in the x and y directions separately.
Let's call the velocity of the third piece v and assume it moves at an angle θ relative to the x-axis. Then we can write the following equations:
Initial momentum in x-direction = Final momentum in x-direction
0 = 0.32 kg * 2.00 m/s + 0.355 kg * 0 m/s + 0.1 kg * v cos(θ)
Initial momentum in y-direction = Final momentum in y-direction
0 = 0.32 kg * 0 m/s + 0.355 kg * 1.50 m/s + 0.1 kg * v sin(θ)
Simplifying these equations, we get:
0.64 = 0.1 v cos(θ)
0.535 = 0.1 v sin(θ)
We can divide the second equation by the first equation to get:
tan(θ) = 0.535/0.64 = 0.836
Taking the inverse tangent of both sides, we get:
θ = 39.8°
Therefore, the third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.
To know more about momentum refer here
https://brainly.com/question/29220242#
#SPJ11
Think of the balloon and sweater. For one object (like the balloon) to become negative it means another object (like the sweater) must become equally what?
friction
induction
conduction
Answer:
According to the only context given, the correct answer is induction.
a train travels at a speed of 60km/h for 0.52 hr and 30km/h for the next 0.24 hrs and then at 70km/h for next 0.71 hr what is the average speed of train?
Explanation:
To find the average speed of the train, we can use the formula:
average speed = total distance / total time
To find the total distance, we need to calculate the distance traveled during each segment of the trip:
- Distance traveled at 60 km/h for 0.52 hours = 60 km/h * 0.52 h = 31.2 km
- Distance traveled at 30 km/h for 0.24 hours = 30 km/h * 0.24 h = 7.2 km
- Distance traveled at 70 km/h for 0.71 hours = 70 km/h * 0.71 h = 49.7 km
Total distance = 31.2 km + 7.2 km + 49.7 km = 88.1 km
To find the total time, we simply add up the times for each segment:
Total time = 0.52 h + 0.24 h + 0.71 h = 1.47 hours
Now we can use the formula to find the average speed:
average speed = total distance / total time = 88.1 km / 1.47 h ≈ 59.86 km/h
Therefore, the average speed of the train is approximately 59.86 km/h.
a 77.7 uf capacitor, a 28.6 mh inductor, and a 630.5 ohm resistor are all connected in series. what linear frequency should be selected for the power supply for this circuit to ensure that the circuit operates at resonance?
The linear frequency that should be selected for the power supply for the circuit to operate at resonance is 2077.9 Hz.
To find the linear frequency that should be selected for the power supply for the circuit to operate at resonance, we can use the formula for resonant frequency of an RLC circuit:
f = 1 / (2π√(L*C))
where f is the resonant frequency, L is the inductance in henries, and C is the capacitance in farads.
In this case, the capacitance is given as 77.7 μF, which is equivalent to 0.0777 F, and the inductance is given as 28.6 mH, which is equivalent to 0.0286 H. The resistance is given as 630.5 Ω.
Substituting these values into the formula, we get:
f = 1 / (2π√(0.0286 H * 0.0777 F)) = 2077.9 Hz
At this frequency, the inductive reactance and the capacitive reactance cancel out, and the impedance of the circuit is purely resistive, resulting in maximum current flow and minimum power loss.
To learn more about frequency click on,
https://brainly.com/question/16991418
#SPJ4
As fluids are transported over a long distance, what happens to the fluid pressure in the pipes? Why does this happen?
As fluids are transported over a long distance, the fluid pressure in the pipes tends to decrease. This occurs due to several factors, including friction, elevation changes, and pipe diameter variations.
1. Friction: As the fluid flows through the pipes, it encounters resistance from the pipe walls, which is known as friction. This friction causes the fluid to lose energy, resulting in a drop in pressure. The longer the distance, the more friction the fluid experiences, and the greater the pressure loss.
2. Elevation changes: When a fluid flows through pipes with elevation changes, the pressure can vary due to gravity. Fluids flowing uphill experience a decrease in pressure due to the energy required to move against gravity. Conversely, fluids flowing downhill may experience an increase in pressure as gravity aids in the movement.
3. Pipe diameter variations: If the pipe diameter changes along the path, it can also affect the fluid pressure. As the fluid moves from a larger diameter pipe to a smaller one, the flow velocity increases, resulting in a decrease in pressure according to Bernoulli's principle.
In summary, as fluids are transported over long distances, the fluid pressure in the pipes generally decreases due to factors such as friction, elevation changes, and pipe diameter variations. This happens because the fluid loses energy as it overcomes these obstacles during its flow, leading to a reduction in pressure.
To know more about fluids refer here
https://brainly.com/question/21708739#
#SPJ11
a 193-v battery, an inductor, and a resistor are connected in series as shown in the diagram below. a two-way switch makes it possible to include or exclude the battery. the switch that had been in position 1 for a long time is suddenly moved to position 2. (enter your answers to at least two decimal places.) (a) what is the voltage across the resistor at the end of four time constants? 3.53 correct: your answer is correct. v (b) at this time, what is the voltage across the inductor? .107 incorrect: your answer is incorrect.
As for the Voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.
When the switch is in position 1, the circuit is closed and the battery is connected in series with the inductor and resistor. This means that current flows through the circuit, causing a magnetic field to be generated by the inductor. However, when the switch is suddenly moved to position 2, the circuit is opened and the battery is no longer connected.
After the switch is moved, the current in the circuit begins to decrease due to the inductor's opposition to changes in current. The time it takes for the current to decrease to 36.8% of its original value is known as the time constant, which is calculated by dividing the inductance of the inductor by the resistance of the resistor.
After four time constants, the voltage across the resistor can be calculated using the equation V = V0 * e^(-t/RC), where V0 is the initial voltage, t is the time elapsed, R is the resistance, and C is the capacitance. Plugging in the values given, we get V = 193 * e^(-4/RC) = 3.53 volts.
As for the voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.
To Learn More About Voltage
https://brainly.com/question/1176850
SPJ11
Find the frequency of the 5th harmonic (h5) of a 5 hz fundamental
The frequency of the 5th harmonic of a 5 Hz fundamental is 25 Hz.
To find the frequency of the 5th harmonic (h₅) of a 5 Hz fundamental, you need to multiply the fundamental frequency (f₁) by the harmonic number (n). The formula is:
fₙ = n*f₁
where:
fₙ = frequency of the nth harmonic
f₁ = fundamental frequency
n = harmonic number
In this case, the fundamental frequency (f₁) is 5 Hz and the harmonic number (n) is 5. So, the frequency of the 5th harmonic (h₅) would be:
h₅ = 5 * 5
= 25 Hz
To know more about frequency, here
brainly.com/question/5102661
#SPJ4
A friend wants to know whether her wedding ring is made of pure gold or of a mixture of gold and silver.
a)Describe an investigation to answer her question.
b)Explain what is likely to be the most significant source of error in your answer.
The density of gold is 19. 3g/cm and the density of silver is 10. 5g/cm
The investigation provides a useful method for determining the composition of a wedding ring, but caution should be taken in interpreting the results due to potential sources of error.
a) To investigate whether the wedding ring is made of pure gold or a mixture of gold and silver, we can use the density of the ring as a clue. Firstly, we need to weigh the ring using a scale with high precision. Then, we can calculate the volume of the ring by measuring its dimensions and using the formula for the volume of a cylinder (V=πr²h). Once we have the weight and volume of the ring, we can calculate its density by dividing the weight by the volume. If the density of the ring is close to the density of pure gold (19.3g/cm³), then the ring is likely to be made of pure gold. However, if the density of the ring is lower than that of pure gold, it may indicate that the ring is made of a mixture of gold and silver.
b) The most significant source of error in our investigation is that the ring may contain other metals or impurities that affect its density. Additionally, the precision of the scale and measurements of the ring's dimensions can also affect the accuracy of our calculations. Therefore, we need to use high-precision instruments and repeat our measurements several times to ensure the accuracy of our results.
Know more about Density here:
https://brainly.com/question/28557244
#SPJ11
if an object is speeding up, which of the following is true?multiple choice question.distance and speed are inversely proportional.the signs of the velocity and acceleration are the same.the magnitude of velocity and acceleration are always zero.the signs of the velocity and acceleration are different.
If an object is speeding up, the sign of its velocity and acceleration are the same. Option B is correct.
This means that both velocity and acceleration are positive if the object is moving in the positive direction and negative if the object is moving in the negative direction. Acceleration is defined as the rate of change of velocity over time, so if an object is speeding up, its velocity is increasing over time. This increase in velocity can be positive or negative, depending on the direction of motion, but in either case, the acceleration must be in the same direction as the velocity.
Distance and speed are not inversely proportional in this case, as they can both increase or decrease together when an object is speeding up. The magnitude of velocity and acceleration are not always zero, as they can be positive or negative depending on the direction of motion. Option B is correct.
To know more about the Acceleration, here
https://brainly.com/question/30499732
#SPJ4
Question 5
A ball is thrown straight down with an initial speed of 4.30 m/s, from a height of
8.80 m. What is the velocity of the ball when it reaches a height of 5.80?
Answer:We can use the kinematic equations of motion to solve this problem. The equation we need to use is:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (which is -9.81 m/s^2), and s is the displacement.
Initially, the ball is thrown straight down with an initial speed of 4.30 m/s and a height of 8.80 m. Let's take the upward direction as positive. Using the equation of motion for displacement, we can find the time it takes for the ball to reach a height of 5.80 m:
s = ut + (1/2)at^2
-3 = 4.3t + (1/2)(-9.81)t^2
-4.905t^2 + 4.3t - 3 = 0
Using the quadratic formula, we find that the time it takes for the ball to reach a height of 5.80 m is t = 0.956 s (rounded to three significant figures).
Now, we can use the equation of motion for velocity to find the velocity of the ball at this point:
v^2 = u^2 + 2as
v^2 = (4.3 m/s)^2 + 2(-9.81 m/s^2)(-3 m)
v = -5.08 m/s
The negative sign indicates that the velocity is in the downward direction. Therefore, the velocity of the ball when it reaches a height of 5.80 m is 5.08 m/s downward.
Explanation:
A car starting from rest accelerates in a straight line path at a constant rate of 2.5m/s².how far will it travel in 12 seconds
The car will travel a distance of 180 meters in 12 seconds.
To determine the distance traveled by the car, we can use the equation of motion:
Distance (d) = Initial velocity (v₀) × time (t) + 0.5 × acceleration (a) × time squared (t²)
Given:
Initial velocity (v₀) = 0 m/s (starting from rest)
Acceleration (a) = 2.5 m/s²
Time (t) = 12 seconds
Plugging in the values into the equation:
Distance (d) = 0 × 12 + 0.5 × 2.5 × 12²
Distance (d) = 0 + 0.5 × 2.5 × 144
Distance (d) = 0 + 0.5 × 2.5 × 144
Distance (d) = 180 meters
To know more about equation of motion refer here
https://brainly.com/question/14355103#
#SPJ11
An electrically neutral balloon is rubbed on your hair. if your hair loses electrons, the balloon has what type of electric charge?
When a neutral balloon is rubbed on your hair, the balloon becomes negatively charged because it gains electrons from your hair. The process of triboelectric charging occurs because of the difference in the materials' ability to give up or gain electrons.
When you rub an electrically neutral balloon on your hair, some electrons are transferred from your hair to the surface of the balloon. As a result, the balloon becomes negatively charged, and your hair becomes positively charged.
This is because electrons are negatively charged particles, and when they move from one object to another, the object that loses electrons becomes positively charged, and the object that gains electrons becomes negatively charged.
The process of transferring electrons from one object to another through friction is called triboelectric charging, and it occurs because some materials have a stronger tendency to give up electrons, while others have a stronger tendency to gain electrons.
In summary, when a neutral balloon is rubbed on your hair, the balloon becomes negatively charged because it gains electrons from your hair. The process of triboelectric charging occurs because of the difference in the materials' ability to give up or gain electrons.
To know more about electrons refer here:
https://brainly.com/question/19448078#
#SPJ11
If the 50-kg crate starts from rest and achieves a velocity of v = 4 m/s
when it travels a distance of 5 m to the right, determine the magnitude of
force P acting on the crate. The coefficient of kinetic friction between the
crate and the ground is μk = 0. 3
If the 50-kg crate starts from rest and achieves a velocity of v = 4 m/s when it travels a distance of 5 m to the right. The magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.
To determine the magnitude of force P acting on the crate, we need to use the equations of motion and the concept of friction. The force acting on the crate can be expressed as the sum of the force due to P and the force due to friction.
First, we can calculate the force due to friction, which is given by the formula Ff = μk x Fn, where Fn is the normal force acting on the crate. Fn can be calculated by multiplying the mass of the crate by the acceleration due to gravity (9.8 m/s²):
Fn = m x g
Fn = 50 kg x 9.8 m/s²
Fn = 490 N.
Therefore, Ff = 0.3 x 490 N = 147 N.
Next, we can use the equations of motion to calculate the force due to P. We can use the formula[tex]v^2 = u^2 + 2as[/tex], where u = 0 m/s (since the crate starts from rest), v = 4 m/s, and s = 5 m.
Solving for a, we get [tex]a = 4^2 / (2 \times 5) = 1.6\; m/s^2.[/tex] The force due to P can be calculated using the formula F = ma, where m is the mass of the crate:[tex]F = 50 \;kg \times 1.6\; m/s^2 = 80 N.[/tex]
Finally, we can add the force due to friction and the force due to P to get the total force: Ftotal = Ff + F = 147 N + 80 N = 227 N.
Therefore, the magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.
In summary, to determine the magnitude of force P acting on a crate, we can use the equations of motion and the concept of friction. By calculating the force due to friction and the force due to P, we can add them to get the total force acting on the crate.
To know more about magnitude refer here:
https://brainly.com/question/30827927#
#SPJ11
why do you think it is not wise to hit hard on someone back?
Why should people be cautious when using statistics from news stories or information from other sources ?
When using statistics from news articles or information from other sources, people should exercise caution because they might not always reflect the whole picture or might be presented in a biased or misleading way.
Why the caution about news?Statistics are not always based on accurate or reliable data, and they can be readily manipulated or misunderstood to support an agenda or stance.
Before making any decisions or acting on the data, it is essential to confirm the information's source and take into account the context in which it is presented. Furthermore, outdated or based on a small sample size statistical data may have an impact on their reliability and accuracy.
Learn more about news:https://brainly.com/question/14632709
#SPJ1
Explain how the physical and biological components of this ecosystem in Chico, California, are being disrupted
Chico, California, is a diverse ecosystem that includes both physical and biological components. Various factors can disrupt these components and impact the overall ecosystem.
1. Physical Component Disruptions:
a. Climate Change: Climate change can alter temperature and precipitation patterns, leading to changes in the availability of water resources, extended drought periods, increased frequency of extreme weather events, and shifts in seasonal patterns. These changes can disrupt the physical environment, affecting habitats, water availability, and overall ecosystem dynamics.
b. Land Use Changes: Human activities such as urbanization, deforestation, and agriculture can lead to habitat loss, fragmentation, and degradation. These changes in land use can disrupt natural habitats, limit food sources, and alter the physical structure of the ecosystem.
c. Pollution: Pollution from various sources, including industrial activities, agriculture, and urban runoff, can introduce harmful substances into the ecosystem. This pollution can impact water quality, soil health, and air quality, affecting both physical components and the organisms that rely on them.
2. Biological Component Disruptions:
a. Invasive Species: The introduction of non-native species can disrupt the balance of the ecosystem. Invasive species can outcompete native species for resources, prey upon native species, alter habitats, and disrupt ecological interactions. This can lead to a decline in native biodiversity and changes in ecosystem functioning.
b. Habitat Loss and Fragmentation: Destruction and fragmentation of habitats due to human activities can lead to the loss of crucial habitats for various species. This loss can result in reduced biodiversity, decreased populations of native species, and disruptions in ecological relationships.
c. Overexploitation: Unsustainable harvesting or hunting of species can lead to population declines and even extinction. Overfishing, overhunting, and excessive removal of plant species can disrupt food chains, alter ecological dynamics, and impact the overall health of the ecosystem.
d. Disease Outbreaks: Disease outbreaks can impact the population dynamics of species within an ecosystem. Pathogens or parasites can spread among organisms, causing declines in populations or altering the interactions between species.
These disruptions to both the physical and biological components of the ecosystem in Chico, California, can have cascading effects on the overall ecosystem health, leading to changes in species composition, food web dynamics, nutrient cycling, and ecosystem services. It is important to understand and address these disruptions to ensure the long-term sustainability and resilience of the ecosystem.
To know more about ecosystem refer here
https://brainly.com/question/31459119#
#SPJ11
An electromagnetic wave traveling through a vacuum
has a wavelength of 1.5 × 10–1
meter. What is the
period of this electromagnetic wave?
The period of the electromagnetic wave is 5×10⁻¹⁰ seconds
What is period?Period is the time taken for a wave to complete one rotation.
To calculate the period of the wave, we use the formula below.
Formula:
T = λ/v...........................Equation 1Where:
T = Period of the electromagnetic wavev = Speed of the electromagnetic waveλ = Wavelength of the electromagnetic waveFrom the question,
Given:
λ = 1.5×10⁻¹ mv = 3×10⁸ m/ssubstitute these values equation 1
T = 1.5×10⁻¹ /3×10⁸T = 5×10⁻¹⁰ secondsLearn more about period here: https://brainly.com/question/29813582
#SPJ1
Please hurry, being timed. And no links !!!
A ball weighing 10 kg rolls down a frictionless incline with a 50 degree angle to the horizontal. If the balls initial velocity was 0 m/s, how much does the mechanical energy of the system change by the time the ball reaches its destination.
A. Increases by 12%
B. Increases by 58%
C. Decreases by 12%
D. Does not change
The mechanical energy of the system decreases by 12% (152.70 J/751.98 J x 100%) when the ball reaches its destination. Therefore, the correct answer is C. Decreases by 12%.
What is Energy?
Energy is a fundamental physical quantity that describes the ability of a system to do work. In other words, energy is the capacity of a system to produce changes in itself or in its environment. It is a scalar quantity, which means that it is characterized only by its magnitude and not by its direction.
When the ball reaches the bottom of the incline, it will have a velocity v given by v = [tex]\sqrt{2gh}[/tex], where h is the height of the incline. Substituting the values, we get v = [tex]\sqrt{29.817.66}[/tex] = 10.99 m/s.
The final kinetic energy of the ball is given by (1/2)m[tex]v^{2}[/tex] = (1/2)[tex]1010.99^{2}[/tex] = 599.28 J.
The final potential energy of the ball is 0, since it is at ground level. Therefore, the total mechanical energy of the system at the bottom of the incline is the sum of the final kinetic and potential energies, which is 599.28 J.
The initial mechanical energy of the system is the potential energy of the ball at the top of the incline, which is 751.98 J.
Therefore, the change in mechanical energy is:
Delta E = 599.28 - 751.98 = -152.70 J
To know more about Energy visit;
https://brainly.com/question/8101588
#SPJ4
What happens to the frequency of the mass spring system if length of the spring is
cut into one third
Answer:Assuming the mass of the spring is not changed, the frequency of the mass-spring system will increase if the length of the spring is cut into one third. This is because the frequency of a mass-spring system is inversely proportional to the square root of the length of the spring. Mathematically, the frequency (f) is given by:
f = 1 / (2π) x √(k/m)
where k is the spring constant and m is the mass of the system. Since the mass of the spring is not changing, if the length of the spring is cut into one third, the square root of the length will become √(1/3) = 0.577. Therefore, the frequency of the system will increase by a factor of 1/0.577, which is approximately 1.73 or √3.
Explanation:
The curved path taken by the project object
The object is known as a projectile, and its course is known as its trajectory.
What is a projectile?A projectile is an object that moves freely under the effects of gravity and air resistance after being pushed by an external force. Although projectiles are any items in motion across space, they are most typically found in warfare and sports.
The curving route that an object takes when thrown is known as projectile motion.
Learn more about projectiles here:
https://brainly.com/question/24216590
#SPJ1
If the speed of light in some unknown material is 2. 00 × 108 m/s, what is the index of refraction of the medium?
The index of refraction of the unknown material is 1.5.
The index of refraction (n) of a medium is defined as the ratio of the speed of light in a vacuum (c) to the speed of light in the medium (v):
n = c / v
In this case, the speed of light in the unknown material is given as 2.00 × [tex]10^8[/tex] m/s. The speed of light in a vacuum is approximately 3.00 × [tex]10^8[/tex] m/s. Substituting these values into the formula:
n = (3.00 × [tex]10^8[/tex] m/s) / (2.00 × [tex]10^8[/tex] m/s)
Simplifying the expression:
n = 1.5
To know more about refraction refer here
https://brainly.com/question/14760207#
#SPJ11
Hubble investigates the relationship between the red-shift of light and distant galaxies.
give the link that Hubble found between observing red-shift and how far away they are from Earth .
Hubble concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.
HUbble's lawIn 1929, Edwin Hubble published his first paper on the relationship between redshift and distance. He tentatively concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.
This relationship is known as the Hubble relation. If you graph this relation, the slope of the line is the Hubble constant or a measure of the expansion rate of the universe.
More on Hubble's relation can be found here: https://brainly.com/question/29752713
#SPJ1
5) assume that a typical lighting strike delivers -25 [c] to the earth, and the average voltage drop between the cloud and ground (voltage of cloud minus voltage of ground) is -75 [mv] during the time the charge is delivered. assume that a lightning strike hits the earth from the cloud every 10 [s], and that the thunderstorm lasts one hour. assume that somehow all of the energy in all of the lightning strikes could be captured. how long would this stored energy be able to supply a city, assuming that the supply rate is the same as that coming from a large power plant, rated at 1,000 [mw]?
The stored energy from all the lightning strikes during the thunderstorm would only be able to supply a city for 0.000675 seconds at the same rate as a large power plant.
The energy delivered by a lightning strike can be calculated using the formula E = VQ, where E is the energy, V is the voltage, and Q is the charge. Therefore, the energy delivered by a lightning strike is:
E = (-75 x 10⁻³V) x (-25 C) = 1.875 J
The total energy delivered by lightning strikes during the thunderstorm can be calculated by multiplying the energy delivered by each strike by the number of strikes, which is 3600/10 = 360.
Therefore, the total energy delivered by lightning strikes during the thunderstorm is:
E_total = 1.875 J/strike x 360 strikes = 675 J
Assuming that all of this energy can be captured and stored, it can supply a city for a certain amount of time. The time that the stored energy can supply the city can be calculated using the formula T = E/P, where T is the time, E is the energy, and P is the power.
Therefore, the time that the stored energy can supply a city is:
T = 675 J / 1,000 MW = 0.000675 s
As a result, the accumulated energy from all of the lightning strikes throughout the thunderstorm could only power a city for 0.000675 seconds at the same rate as a huge power plant.
To know more about the Lightning strike, here
https://brainly.com/question/15242337
#SPJ4
What is the best way for someone to identify a suitable career?
1.brainstorm a list of things that person likes to do and things they are good at and find the "common denominator"
2.rely on the advice of someone you trust, such as a parent or friend
3.pick one that is popular, prestigious and pays well
4.take an aptitude test and use the results to make a decision
The best way for someone to identify a suitable career is a subjective matter and can vary from person to person. However, a common approach involves a combination of self-reflection, exploration, and research. Some recommended steps to identify a suitable career include:
1. Self-reflection: Brainstorm a list of things you enjoy doing and are passionate about. Consider your interests, hobbies, skills, and values. Think about what brings you satisfaction and a sense of fulfillment.
2. Skills assessment: Identify your strengths and areas where you excel. Assess your natural abilities, talents, and acquired skills. Determine what tasks or activities you perform well and enjoy doing.
3. Exploration and research: Explore different career options that align with your interests and skills. Research various industries, job roles, and career paths. Gather information about job responsibilities, required qualifications, growth prospects, and work-life balance.
4. Gain experience: Seek opportunities to gain hands-on experience in fields or roles you are considering. This can be through internships, part-time jobs, volunteering, or shadowing professionals. Practical experience can help you gain insight into the day-to-day realities of different careers.
5. Networking and informational interviews: Connect with professionals working in fields of interest. Conduct informational interviews to learn more about their career paths, experiences, and advice. Networking can provide valuable insights and potential opportunities.
6. Professional aptitude tests: Consider taking aptitude tests or career assessments that evaluate your strengths, interests, and personality traits. These tests can provide additional guidance and suggestions for suitable career paths. However, remember that they should be used as a tool and not as the sole decision-making factor.
It is important to note that selecting a suitable career is a personal decision, and what works for one person may not work for another. It's essential to consider your individual aspirations, values, and long-term goals when making career choices.
Seek advice from trusted mentors or career counselors who can provide guidance based on your specific circumstances and help you make an informed decision.
To know more about career refer here
https://brainly.com/question/8825832#
#SPJ11
A 20 kg tennis ball launcher shoots a 0. 057 kg tennis ball across a frictionless court. If the tennis ball’s velocity after it is launched is 36 m/s to the north, what is the velocity of the tennis ball launcher?
The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.
To determine the velocity of the tennis ball launcher, we can apply the law of conservation of momentum. This law states that the total momentum before an event is equal to the total momentum after the event, provided no external forces are acting on the system.
Before the launch, both the 20 kg tennis ball launcher and the 0.057 kg tennis ball are at rest, so the total initial momentum is zero. After the launch, the tennis ball has a velocity of 36 m/s to the north. We can find the final momentum of the launcher using the equation:
initial momentum = final momentum
0 = (mass of tennis ball)(velocity of tennis ball) + (mass of launcher)(velocity of launcher)
Substitute the given values:
0 = (0.057 kg)(36 m/s) + (20 kg)(velocity of launcher)
Solve for the velocity of the launcher:
velocity of launcher = -(0.057 kg * 36 m/s) / 20 kg
The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.
To know more about velocity, refer here:
https://brainly.com/question/1482529#
#SPJ11
