The observer hears a frequency of 374 Hz when the car is approaching and 293 Hz when it is moving away.
The frequency of sound heard by an observer is affected by the motion of the source of the sound relative to the observer. This effect is known as the Doppler effect. The Doppler effect can be described by the equation: f' = f (v±vo)/(v±vs)
where f is the frequency of the sound emitted by the source, v is the speed of sound, vo is the speed of the observer, and vs is the speed of the source. The ± sign is positive when the source is moving toward the observer and negative when it is moving away.
(a) When the car is approaching, the frequency of sound heard by the observer is higher than the frequency emitted by the car. Applying the Doppler effect equation, we get: f' = f (v+vo)/(v+vs), f' = 320 Hz (343 m/s + 0)/(343 m/s - 35.0 m/s), f' = 374 Hz
(b) When the car is right next to the observer, the frequency of sound heard by the observer is the same as the frequency emitted by the car. This is because there is no relative motion between the observer and the source.
(c) When the car is moving away, the frequency of sound heard by the observer is lower than the frequency emitted by the car. Applying the Doppler effect equation, we get:
f' = f (v-vo)/(v-vs)
f' = 320 Hz (343 m/s - 0)/(343 m/s - 35.0 m/s)
f' = 293 Hz
Therefore, the observer hears a frequency of 374 Hz when the car is approaching and 293 Hz when it is moving away.
To know more about Doppler effect, refer here:
https://brainly.com/question/28106478#
#SPJ11
You are participating in a fresh water fishing tournament with the goal of catching the heaviest fish. You are in the middle of the river when you finally get your catch; unfortunately, you realize that you left the spring scales in your car. All you have in the boat are the paddles, your 16 Oz coffee mug, some rope, measuring tape, and a plastic bag.
Required:
Estimate the mass of the fish (in kilograms) using these items
To estimate the mass of the fish using the available items, follow these steps:
1. Fill your 16 oz coffee mug with river water.
2. Tie the rope around the fish securely, ensuring it doesn't escape.
3. Place the fish inside the plastic bag and seal it. Make sure there's no air inside the bag.
4. Use the paddles to create a makeshift balance scale. Balance the paddle on a stable surface in the boat, with the center acting as a fulcrum.
5. Place the bag with the fish on one end of the paddle and the coffee mug filled with water on the other end.
6. Gradually add or remove water from the coffee mug until the paddle balances evenly.
7. Measure the volume of water left in the coffee mug. This is approximately equal to the volume of the fish.
8. Assume the fish has a density similar to water (1 kg/L). Convert the remaining water volume in the coffee mug from ounces to liters (16 oz = 0.473 L).
9. Multiply the fish's volume in liters by its density (1 kg/L) to find the fish's mass in kilograms.
Keep in mind that this method is an estimation and may not be extremely accurate, but it should give you a rough idea of the fish's mass in the absence of proper scales.
To learn more about density, refer below:
https://brainly.com/question/29775886
#SPJ11
The caloris basin on mercury covers a large region of the planet, but few craters have formed on top of it. from this we conclude that the :_________.
i. caloris basin was formed by a volcano.
ii. erosion destroyed the smaller craters that formed on the basin. only very large impactors hit mercury's surface in the past.
iii. the caloris basin formed toward the end of the solar system's period of heavy bombardment.
iv. mercury's atmosphere prevented smaller objects from hitting the surface.
The caloris basin on mercury covers a large region of the planet, but few craters have formed on top of it. from this we conclude that iii) the caloris basin formed toward the end of the solar system's period of heavy bombardment.
From the observation that the Caloris Basin on Mercury covers a large region of the planet, but few craters have formed on top of it, we can conclude that the Caloris Basin likely formed toward the end of the solar system's period of heavy bombardment (option iii). This is because the basin has not accumulated a significant number of craters on top of it, suggesting that it was created after most of the intense impacts had occurred.
The other options are less likely: option i, that the Caloris Basin was formed by a volcano, is not as plausible since the basin is generally thought to have been formed by a massive impact event. Option ii, that erosion destroyed smaller craters on the basin, is unlikely as Mercury lacks the significant atmosphere and geological processes necessary for substantial erosion to occur. Finally, option iv, that Mercury's atmosphere prevented smaller objects from hitting the surface, is incorrect because Mercury's extremely thin atmosphere is not capable of shielding the surface from impacts. The correct option is iii) the caloris basin formed toward the end of the solar system's period of heavy bombardment.
For more about solar system's:
https://brainly.com/question/12075871
#SPJ11
The 75. 0 kg hero of a movie is pulled upward with a constant acceleration of 2. 00 m/s2 by a rope. What is the tension on the rope?
585N
75. 0N
885N
11. 8N
The tension on the rope is 886 N. We can use Newton's second law to solve this problem:
ΣF = ma
where
ΣF is the net force acting on the hero,
m is the mass of the hero, and
a is the acceleration of the hero.
In this case, the hero is being pulled upward by a rope, so the net force acting on the hero is the tension in the rope minus the weight of the hero:
ΣF = T - mg
where
T is the tension in the rope and
g is the acceleration due to gravity.
Substituting the given values, we get:
T - mg = ma
T - (75.0 kg)(9.81 m/s²) = (75.0 kg)(2.00 m/s²)
Simplifying, we get:
T = (75.0 kg)(2.00 m/s² + 9.81 m/s²)
T = 75.0 kg × 11.81 m/s²
T = 886 N
Therefore, the tension on the rope is 886 N.
To know more about tension refer here
brainly.com/question/11348644#
#SPJ11
How can you theoretically explain it? 3. What will happen to acceleration of mass spring system if its mass is doubled? 4. A simple pendulum has time period 'T'. What will happen to its time period if it
3. If the mass is doubled, then acceleration will be halved. If both the net force and the mass are doubled, the acceleration will be unchanged.
4. If we reduce the length of the string by half then the time period will be ✓2 of the initial time period
3.5g of liquid in 4mins with a pressure gradient of 10cm is how many m/s
To calculate the velocity of liquid flow, we need to use the equation Q = A*v, where Q is the volumetric flow rate, A is the cross-sectional area of the pipe, and v is the velocity of the liquid.
Given that 3.5g of liquid flows in 4mins, we need to convert it into volumetric flow rate. 1g of water is equal to 1mL, therefore 3.5g is equal to 3.5mL. Since 4mins is equal to 240s, the volumetric flow rate is 3.5/240 = 0.0146mL/s.
To calculate the velocity of the liquid, we need to use the pressure gradient of 10cm. The pressure gradient is the change in pressure per unit distance along the pipe. 1cm of water column is equal to 0.098kPa, therefore the pressure gradient is 0.098*10 = 0.98kPa/m.
Using the equation ΔP = ρgh, where ΔP is the pressure difference, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the height of the pressure gradient, we can calculate the velocity of the liquid. Rearranging the equation to solve for v, we get v = √(2ΔP/ρ), where ΔP is the pressure difference across the pipe.
Assuming the density of water is 1000kg/m³, the velocity of the liquid is v = √(2*0.98/1000) = 0.044m/s.
Therefore, the velocity of liquid flow is 0.044m/s, given that 3.5g of liquid flows in 4mins with a pressure gradient of 10cm.
For more about velocity.
https://brainly.com/question/30649574
#SPJ11
If the electric potential at point A in the electric field created by
a point charge of 3. 3 * 10-11 C is 0. 6 V, what's the distance
between point A and the point charge? Estimate kas 9. 00 x
109Nm2/C2
The distance between point A and the point charge is approximately 1.815 micrometers.
The electric potential at a point in the electric field created by a point charge is given by the formula V = kq/r, where V is the electric potential, k is the Coulomb constant (9.00 x [tex]10^{9}[/tex] [tex]Nm^{2}/C^{2}[/tex]), q is the point charge, and r is the distance from the point charge.
Rearranging this equation, we get r = kq/V. Plugging in the given values, we get: r = (9.00 x [tex]10^{9}[/tex] [tex]Nm^{2}/C^{2}[/tex])(3.3 x [tex]10^{-11}[/tex] C)/(0.6 V)
Simplifying this expression, we get: r = 1.815 x [tex]10^{-6}[/tex] m
Therefore, the distance between point A and the point charge is approximately 1.815 micrometers.
To know more about electric potential , refer here:
https://brainly.com/question/12645463#
#SPJ11
if it requires 6.0 j of work to stretch a particular spring by 2.0 cm from its equilibrium length, how much more work will be required to stretch it an additional 4.0 cm
It would require an additional 1.35 J of work to stretch the spring by an additional 4.0 cm.
The work required to stretch a spring is given by the equation:
W = (1/2)kx²
where W is the work done, k is the spring constant, and x is the displacement from the equilibrium position.
To find the spring constant k, we can use the equation:
k = F/x
where F is the force required to stretch the spring by a certain amount.
Given that it requires 6.0 J of work to stretch the spring by 2.0 cm, we can find the spring constant as follows:
6.0 J = (1/2)k(0.02 m)²
k = 750 N/m
To stretch the spring an additional 4.0 cm, the displacement from the equilibrium position would be:
x = 0.02 m + 0.04 m = 0.06 m
Using the equation for work done, we can find the additional work required:
W = (1/2)kx²
W = (1/2)(750 N/m)(0.06 m)²
W = 1.35 J
As a result, stretching the spring by 4.0 cm would need an additional 1.35 J of labour.
To know more about the Equilibrium, here
https://brainly.com/question/28814005
#SPJ4
Stephen rubbed one balloon on his hair for 10 seconds.
Then he grabbed another balloon and rubbed it on his hair for 10 seconds.
What will happen if he ties a string to each balloon and places them next to each other?
a The two balloons will repel.
b The two balloons will attract.
c The two balloons will do nothing since they are not charged.
Answer:
a. The two balloons will repel
Explanation:
when stephen rubs the balloon on his head, the balloon collects a negative charge. this will happen to both balloons and because the balloons are both negatively charged they will repel
the approach to motivation emphasizes the role of species-specific instincts in directing behavior.
The approach to motivation that emphasizes the role of species-specific instincts in directing behavior is called the Instinct Theory of Motivation.
This theory suggests that certain innate, fixed patterns of behavior, known as instincts, are responsible for motivating actions and reactions within specific species. These instincts have evolved over time due to their contribution to the survival and reproductive success of the species.
For example, the fight or flight response, which is a common instinct among many animals, helps protect them from predators and ensures their survival. Another example is the maternal instinct observed in many mammal species, which promotes nurturing and protective behaviors towards their offspring, ultimately benefiting their survival and reproduction.
Instinct Theory of Motivation has its roots in the work of early psychologists like William James and Sigmund Freud, who believed that instincts played a significant role in shaping human behavior. However, it is important to note that while instincts do influence motivation, they are not the only factors at play. Other approaches, such as the drive-reduction theory and cognitive theories, also contribute to our understanding of motivation and behavior.
To know more about Instinct Theory of Motivation, refer here:
https://brainly.com/question/31586201#
#SPJ11
Explain why knowing a combination of grappling and striking martial arts is advantageous during a street self defense scenario. Explain how both are beneficial
Knowing a combination of grappling and striking martial arts is advantageous during a street self-defense scenario because it provides a well-rounded skill set to address various types of threats.
Grappling techniques, such as those found in Brazilian Jiu-Jitsu or Judo, focus on controlling, submitting, or immobilizing an opponent, which can be especially helpful in close-quarters situations.
Striking martial arts, such as Muay Thai or Boxing, emphasize powerful punches, kicks, and knee strikes to deter or incapacitate an attacker from a distance.
By mastering both grappling and striking disciplines, one can adapt to different situations, maintain control, and maximize their chances of successfully defending themselves in a street scenario.
To learn more about martial, refer below:
https://brainly.com/question/30390696
#SPJ11
X-ray pulses from cygnus x-1, a celestial x ray source, have been recorded during high-altitude rocket flight. the signals can be interpreted as originating when a blob of ionized matter orbits a black hole with a period of 4.81 ms if the blob were in a circular orbit about a black hole whose mass is 27.7 times the mass of the situ, what is the orbit radius? the value of the gravitational constant is 6.67259 x 10^-11 n .m^2/kg^2 and mass of the sun is 1.991 x 10^30 kg. answer �n units of km.
The orbit radius is 1.64 x [tex]10^{6}[/tex] km. The period of the orbit of the blob of ionized matter around a black hole is given as 4.81 ms.
The mass of the black hole is 27.7 times the mass of the Sun, which is 1.991 x [tex]10^{30}[/tex] kg. Let the radius of the orbit be denoted as r.
Then, the orbital velocity of the blob can be calculated as v = 2πr/T, where T is the period of the orbit. Using this formula, we get v = 2πr/4.81 x [tex]10^{-3}[/tex] s.
The gravitational force between the black hole and the blob of ionized matter is given by F = Gm1m2/[tex]r^{2}[/tex], where m1 and m2 are the masses of the black hole and the blob respectively, and G is the gravitational constant.
Equating this force to the centripetal force, which is /r, we can solve for r. Simplifying this equation, we get r = (GM*[tex]T^{2}[/tex])/([tex]4\pi ^{2}[/tex]), where M is the mass of the black hole.
Substituting the given values, we get r = 1.64 x [tex]10^{6}[/tex] km. Therefore, the orbit radius is 1.64 x [tex]10^{6}[/tex] km.
To know more about gravitational force, refer here:
https://brainly.com/question/12528243#
#SPJ11
According to the book, the small electric devices that, like vacuum tubes, could receive and amplify radio signals were known as:
The small electric devices that, like vacuum tubes, could receive and amplify radio signals were known as transistors.
Transistors revolutionized the field of electronics by replacing vacuum tubes, which were bulky, fragile, and consumed a lot of power. The invention of transistors, which was made by John Bardeen, Walter Brattain, and William Shockley at Bell Labs in 1947, paved the way for the development of smaller, more efficient electronic devices, such as radios, televisions, and computers.
Transistors are made of semiconductor materials, such as silicon or germanium, and they work by controlling the flow of electrons through a material. They have three main components: the emitter, the base, and the collector. When a small current is applied to the base of a transistor, it controls the flow of a larger current between the emitter and the collector, allowing the transistor to amplify signals.
Transistors are now found in nearly every electronic device, from smartphones and laptops to cars and medical equipment. They have enabled the development of smaller, more efficient, and more powerful devices that have transformed our daily lives.
To learn more about transistors
https://brainly.com/question/31052620
#SPJ4
An astronaut weighs 8.00 × 102 newtons on the surface of Earth. What is the weight of the astronaut 6.37 × 106 meters above the surface of Earth?
The new weight of the object from the description would now be 2 × 10^2 N.
What is the relationship of the force and the distance?Given that the force between two bodies is inversely proportional to the square of their distance, doubling that distance results in a force that is one-fourth of what it was before.
We would now know that the force that is now acting on the object is;
Weight = 1/4 * 8.00 × 10^2 N
Weight = 2 × 10^2 N
This is true when we consider the universal gravitational law that governs the force on the object.
Learn more about weight:https://brainly.com/question/10069252
#SPJ1
A uniform plank AB of mass 20kg is supported horizontally at 20cm and 70cm marks from A the plank is in equilibrium when massese 50kg and 70kg are suspended at A and B respectively and the weight of 100N is suspended at the 40cm Mark from B
The equilibrium of the plank is maintained: when the net torque and net force are both equal to zero.
In this scenario, we have a uniform plank AB with a mass of 20 kg. It is supported horizontally at points 20 cm and 70 cm from point A. The plank is in equilibrium when additional masses of 50 kg and 70 kg are suspended at points A and B, respectively. Furthermore, a weight of 100 N is suspended at the 40 cm mark from point B.
To maintain equilibrium, the net torque and the net force on the plank must be zero. The torque produced by each mass and weight on the plank can be calculated as the product of the force and the distance from the pivot point. The force due to the mass of the plank and the suspended masses can be calculated using the formula F = mg, where m is the mass and g is the acceleration due to gravity (approximately 9.81 m/s^2).
The torque balance equation will involve the torques produced by the 20 kg plank, the 50 kg and 70 kg suspended masses, and the 100 N weight. By calculating these torques and setting the net torque to zero, we can analyze the equilibrium state of the plank. Additionally, we need to ensure that the net force acting on the plank is also zero, which can be confirmed by summing the forces due to each mass and weight and setting the total equal to zero.
In summary, the equilibrium of the plank is maintained when the net torque and net force are both equal to zero. This involves balancing the torques produced by the 20 kg plank, the 50 kg and 70 kg suspended masses, and the 100 N weight, as well as the forces acting on the plank.
To know more about net torque, refer here:
https://brainly.com/question/30284628#
#SPJ11
The molar specific heat of a diatomic gas is measured at constant volume and found to be 29. 1 J/mol · K. The types of energy that are contributing to the molar specific heat are(a) translation only(b) translation and rotation only(c) translation and vibration only(d) translation, rotation, and vibration
Option (d) translation, rotation, and vibration is the correct answer for energies contributing to the molar specific heat of 29. 1 J/mol · K of a diatomic gas is measured at constant volume.
The molar specific heat of a diatomic gas is measured at constant volume and found to be 29.1 J/mol·K. To determine the types of energy contributing to the molar specific heat, let's consider the options: translation, rotation, and vibration.
For a diatomic molecule, the translational degrees of freedom are 3, as it can move in the x, y, and z directions. The rotational degrees of freedom are 2, since it can rotate around two axes. The vibrational degrees of freedom for a diatomic molecule are 1, as there is only one mode of vibration.
According to the equipartition theorem, each degree of freedom contributes (1/2)R to the molar specific heat at constant volume (Cv), where R is the gas constant (8.314 J/mol·K).
Let's calculate the molar specific heat (Cv) for each type of energy:
(a) Translation only:
Cv = (3/2)R = (3/2)(8.314) = 12.471 J/mol·K
(b) Translation and rotation only:
Cv = (3/2 + 2/2)R = (5/2)(8.314) = 20.785 J/mol·K
(c) Translation and vibration only:
Cv = (3/2 + 1/2)R = (4/2)(8.314) = 16.628 J/mol·K
(d) Translation, rotation, and vibration:
Cv = (3/2 + 2/2 + 1/2)R = (6/2)(8.314) = 24.942 J/mol·K
Comparing the calculated molar specific heat values with the given value of 29.1 J/mol·K, none of the options match exactly. However, option (d) is the closest, which includes translation, rotation, and vibration. While it doesn't perfectly match the given value, it is the most plausible answer based on the available options.
Learn more about molar specific heat at: https://brainly.com/question/21052046
#SPJ11
A 2 kg ball is thrown upward with an initial speed of 12 m/s. after rising a vertical distance of 3.0 meters, the ball is moving upwards at only 5 m/s. determine the average force the ball experiences from air resistance during this time.
A 2 kg ball is thrown upward with an initial speed of 12 m/s. After rising 3.0 meters, it is moving upwards at 5 m/s. The average force of air resistance on the ball is 32.3 N.
When an object is thrown upward, it experiences air resistance that opposes its motion. In this scenario, a 2 kg ball is thrown upward with an initial velocity of 12 m/s.
After rising a vertical distance of 3.0 meters, its velocity reduces to 5 m/s. We need to find the average force the ball experiences due to air resistance during this time.
To solve this problem, we can use the work-energy principle which states that the net work done on an object is equal to its change in kinetic energy. Since the ball is moving upward, the net work done on the ball is the work done by gravity and air resistance.
We can assume that the work done by gravity is negligible because the vertical displacement of the ball is small. Therefore, the work done by air resistance is equal to the change in the ball's kinetic energy.
The change in kinetic energy of the ball can be calculated using the equation: [tex]\Delta KE = 1/2 \times m \times (vf^2 - vi^2)[/tex], where m is the mass of the ball, vi is the initial velocity, and vf is the final velocity. Substituting the given values, we get [tex]\Delta KE = 1/2 \times 2 kg \times (5 \;m/s)^2 - (12 \;m/s)^2) = -97 J[/tex].
Since the change in kinetic energy is negative, the work done by air resistance is negative. Therefore, the average force the ball experiences due to air resistance is [tex]F = -\Delta KE/d = -(-97 J)/3 m = 32.3 N[/tex].
In summary, we can calculate the average force the ball experiences from air resistance during its upward journey using the work-energy principle. The force is negative as it opposes the motion of the ball, and its magnitude is 32.3 N.
To know more about force refer here:
https://brainly.com/question/26115859#
#SPJ11
this type of lightning extends up to 95 kilometers above the top of a thunderstorm, and it resembles a jellyfish: this type of lightning extends up to 95 kilometers above the top of a thunderstorm, and it resembles a jellyfish: sheet lightning. sprite. st. elmo's fire. ball lightning.
The type of lightning that extends up to 95 kilometers above the top of a thunderstorm and resembles a jellyfish is called a sprite. Option B is correct.
Sprites are electrical discharges that occur high above thunderstorms and are often red or orange in color. They are caused by the same type of electrical breakdown that produces lightning, but they occur in the mesosphere, rather than the troposphere where lightning occurs. Sprites are relatively short-lived, lasting only a few milliseconds, and are difficult to observe from the ground due to their high altitude.
They were first documented in 1989, and since then, they have been observed and studied extensively by scientists using high-speed cameras and other specialized equipment. Sprites are still not fully understood, but their study is providing valuable insights into the physics of lightning and the behavior of the Earth's atmosphere. Option B is correct.
To know more about the Thunderstorm, here
https://brainly.com/question/11020011
#SPJ4
4. An open cylinder is filled with water to a height of 0.5m. What is the absolute pressure on the base area? s
Explanation:
To find the absolute pressure on the base area of the cylinder, we need to use the formula for absolute pressure:
P(abs)=P(atm)+P(gauge)
where P(abs) is the absolute pressure, P(atm) is the atmospheric pressure, and P(gauge) is the gauge pressure.
The gauge pressure is the pressure exerted by the water column on the base area. It depends on the height and density of the water column, and can be calculated using the formula:
P(gauge)=ρgh
where ρ is the density of water, g is the acceleration due to gravity, and h is the height of the water column.
Given that the height of the water column is 0.5 m, and assuming that the density of water is 1000 kg/m^3 and the acceleration due to gravity is 9.8 m/s^2, we can find the gauge pressure as:
P(gauge)=1000×9.8×0.5
P(gauge)=4900 Pa
The atmospheric pressure at sea level is approximately 101325 Pa. Therefore, we can find the absolute pressure on the base area as:
P(abs)=101325+4900
P(abs)=106225 Pa
Hence, the absolute pressure on the base area of the cylinder is 106225 Pa.
Donate me if you want: https://www.buymeacoffee.com/imstillsid
1. how much is the increase in temperature from 1880 to 2010?
2. what happened to the amount of carbon dioxide from 1880 to 2010?
3. what is the relationship between the amount of carbon dioxide and global temperature?
4. when was temperature at its highest and at its lowest?
please help neep asap....
From 1880 to 2010, there was a substantial increase in both global temperature and atmospheric CO2 levels, with a positive correlation between the two. The temperature reached its highest point in 2010, and its lowest point in the late 1800s.
1. The increase in temperature from 1880 to 2010 is approximately 0.8°C (1.4°F) according to NASA's Goddard Institute for Space Studies. This increase in temperature has been attributed to human activities such as burning fossil fuels, deforestation, and agriculture.
2. The amount of carbon dioxide in the atmosphere has significantly increased from 1880 to 2010. According to the National Oceanic and Atmospheric Administration (NOAA), the concentration of carbon dioxide has increased from 280 parts per million (ppm) in 1880 to over 400 ppm in 2010. This increase is due to the burning of fossil fuels and deforestation.
3. There is a strong correlation between the amount of carbon dioxide and global temperature. As the amount of carbon dioxide increases, it traps more heat in the Earth's atmosphere, leading to an increase in global temperature. This is known as the greenhouse effect.
4. The temperature was at its highest in 2016, with an average global temperature of 1.78°F (0.99°C) above the 20th-century average. The temperature was at its lowest in 1904, with an average global temperature of 1.46°F (0.81°C) below the 20th-century average. However, it is important to note that these temperature fluctuations are within the range of natural variability, and it is the overall upward trend in temperature that is of concern.
For more about global temperature:
https://brainly.com/question/12401793
#SPJ11
If the magnitude of the drift velocity of free electrons in a copper wire is 8. 32 10-4 m/s, what is the electric field in the conductor
The electric field in the copper wire is approximately 7.63 x [tex]10^{-5}[/tex] V/m. The drift velocity of free electrons in a copper wire is given as 8.32 x [tex]10^{-4}[/tex] m/s.
The electric field in a conductor is directly proportional to the drift velocity. The relationship between drift velocity and electric field is given by:
vd = (eEτ)/(m)
where,
vd = drift velocity of electrons
e = charge of an electron
E = electric field
τ = relaxation time of electrons
m = mass of an electron
Assuming the values of e, m, and τ for copper, we can solve for the electric field:
E = (vd x m)/(eτ)
E = (8.32 x [tex]10^{-4}[/tex] m/s x 9.11 x [tex]10^{-31}[/tex] kg)/(1.6 x [tex]10^{-19}[/tex] C x 2.3 x [tex]10^{-14}[/tex] s)
E ≈ 7.63 x [tex]10^{-5}[/tex] V/m
Therefore, the electric field in the copper wire is approximately 7.63 x [tex]10^{-5}[/tex] V/m.
To know more about drift velocity, refer here:
https://brainly.com/question/31580648#
#SPJ11
A diode has a high resistance in the __________ direction. Which word completes this sentence?
ans. forward baised
The resistance measurement is high when the diode is forward-biased because current from the multimeter flows through the diode, causing the high-resistance measurement required for testing.
Bart has rubbed a balloon with wool to give it a charge of -1.0 x 10-6 c. he then acquires a plastic golf tube with a charge of +4.0 x 10-6 c localized at a given position. determine the distance between the golf tube and the balloon if the electrical force between the two is -1.0 x 10-5 n.
The distance between the golf tube and the balloon is approximately 53.9 millimeters.
To solve this problem, we can use Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is proportional to the product of their charges divided by the square of the distance (r) between them:
F = k * (q1 * q2) / r²
where k is Coulomb's constant, approximately 8.99 x 10^9 Nm²/C².
In this case, the electrical force (F) is -1.0 x 10^-5 N, the charge of the balloon (q1) is -1.0 x 10^-6 C, and the charge of the plastic golf tube (q2) is +4.0 x 10^-6 C. We want to find the distance (r) between them.
First, let's rearrange the formula to solve for r:
r = √(k * (q1 * q2) / F)
Now, substitute the given values into the equation:
r = √((8.99 x 10^9 Nm²/C²) * (-1.0 x 10^-6 C) * (4.0 x 10^-6 C) / (-1.0 x 10^-5 N))
Solve for r:
r ≈ 0.0539 meters or 53.9 millimeters
So, the distance between the golf tube and the balloon is approximately 53.9 millimeters.
To learn more about force, refer below:
https://brainly.com/question/13191643
#SPJ11
Air enters a nozzle at. 2mpa, 350k and a velocity of 150m/s. Assuming isentropic flow, determine a) the temperature and b) the pressure of the air where the air velocity is equal to the speed of sound. C) what is the ratio of the area at this location to the entrance area?
The ratio of the area at this location to the entrance area can also be determined. The temperature at this location is 291.7K, the pressure is 1.058 MPa, and the area ratio is 1.603.
To solve this problem, we can use the isentropic flow equations and the speed of sound formula. The first step is to determine the Mach number at the nozzle entrance. We can use the following formula:
Mach number = velocity of air/speed of sound
Using the given values, we can calculate that the Mach number is 0.407. Since the flow is isentropic, we can assume that the entropy of the air remains constant throughout the nozzle.
a) To determine the temperature of the air where the velocity is equal to the speed of sound, we can use the following formula:
Temperature ratio = [tex]$1 + \frac{(\gamma - 1)}{2} \times M^2$[/tex]
where gamma is the ratio of specific heats of air, which is 1.4. At the speed of sound, the Mach number is 1. Using the formula, we get:
Temperature ratio = [tex]$1 + \frac{(1.4-1)}{2} \times 1^2 = 1.2$[/tex]
The temperature at the nozzle entrance is given as 350K. Therefore, the temperature where the velocity is equal to the speed of sound is:
Temperature = temperature at entrance / temperature ratio = 350 / 1.2 = 291.7K
b) To determine the pressure of the air where the velocity is equal to the speed of sound, we can use the following formula:
Pressure ratio = [tex]$\left(1 + \frac{(\gamma - 1)}{2} \times M^2 \right)^\frac{\gamma}{\gamma-1}$[/tex]
At the speed of sound, the Mach number is 1. Using the formula, we get:
Pressure ratio = [tex]$\left(1 + \frac{(1.4-1)}{2} \times 1^2 \right)^\frac{1.4}{0.4} = 1.891$[/tex]
The pressure at the nozzle entrance is given as 2MPa. Therefore, the pressure where the velocity is equal to the speed of sound is:
Pressure = pressure at entrance / pressure ratio = 2 / 1.891 = 1.058 MPa
c) To determine the ratio of the area at this location to the entrance area, we can use the following formula:
Area ratio = [tex]$\frac{1}{M} \times \left(\frac{2 + (\gamma-1) \times M^2}{\gamma+1}\right)^{\frac{\gamma+1}{2(\gamma-1)}}$[/tex]
At the speed of sound, the Mach number is 1. Using the formula, we get:
Area ratio = [tex]$\frac{1}{1} \times \left(\frac{2 + (1.4-1) \times 1^2}{1.4+1}\right)^{\frac{1.4+1}{2(1.4-1)}} = 1.603$[/tex]
Therefore, the ratio of the area at the location where the velocity is equal to the speed of sound to the entrance area is 1.603.
To learn more about Mach number
https://brainly.com/question/13794923
#SPJ4
Puck A and puck B are free to slide without friction on a horizontal air table; the mass of puck A has been measured to be 165. 0 grams , but the mass of puck B is unknown. The pucks are made of super-ball like material, so any collision between them should be elastic. An experiment is done with puck B at rest at the center of the air table, and with puck A sent at 55. 0 cm/s to make a glancing collision with puck B. After the collision, puck A is measured to have a speed of 29. 0 cm/s , and is observed to have been deflected by 27. 0 degrees from its original direction. What was the y component of puck B's momentum after the collision?
The y component of puck B's momentum after the collision is 0 g cm/s.
What is momentum?Momentum is the quantity of motion of a moving object, measured as a product of its mass and velocity. In physics, it is a conserved quantity, meaning that the total momentum of a closed system remains constant, regardless of the interactions within the system. Momentum can be transferred from one object to another, or between objects and their environment. Momentum is the driving force behind many physical phenomena, including collisions, friction, rocket propulsion, and the orbits of planets and stars.
[tex]p_A[/tex] (before) = [tex]m_A[/tex] * [tex]v_A[/tex] = 165.0 g * 55.0 cm/s = 9077.5 g cm/s
[tex]v_A[/tex] (x) = [tex]v_A[/tex] * cos(27.0°) = 29.0 cm/s * cos(27.0 °) = 27.61 cm/s
[tex]v_A[/tex] (y) = [tex]v_A[/tex] * sin(27.0 °) = 29.0 cm/s * sin(27.0 °) = 14.26 cm/s
Using these components, we can calculate the momentum of puck A after the collision:
[tex]p_A[/tex] (after) = [tex]m_A[/tex] * [tex]v_A[/tex] = 165.0 g * 27.61 cm/s = 4562.1 g cm/s
[tex]p_A[/tex] (before) + [tex]p_B[/tex] (before) = [tex]p_A[/tex] (after) + [tex]p_B[/tex] (after)
9077.5 g cm/s + [tex]p_B[/tex] (before) = 4562.1 g cm/s + [tex]p_B[/tex] (after)
[tex]p_B[/tex] (before) = 4562.1 g cm/s - 4562.1 g cm/s = 0
Since the momentum of puck B before the collision was 0, its momentum after the collision must also be 0. Therefore, the y component of puck B's momentum after the collision is 0 g cm/s.
To learn more about momentum
https://brainly.com/question/1042017
#SPJ4
Suppose you are sitting in a boat that is motionless on the water. What happens when someone standing on a dock nearby tosses a watermelon to you, assuming that you catch it? Explain this outcome according to the law of the conservation of momentum.
Please Show work. I need help.
According to the law of conservation of momentum, the total momentum of a system remains constant if no external forces act on it. In this scenario, the boat and the person are initially at rest, so their total momentum is zero.
When the person on the dock tosses the watermelon to you, the watermelon will have an initial momentum in the direction of the throw. Since there are no external forces acting on the system, the total momentum of the system must still be zero after the toss.
To maintain the total momentum at zero, you and the boat must acquire an equal but opposite momentum to balance out the momentum of the watermelon. As a result, the boat will move backward in response to the forward momentum acquired by you when you catch the watermelon.
This outcome demonstrates the law of conservation of momentum in action, where the total momentum of the system (you, the boat, and the watermelon) remains constant before and after the toss.
To know more about momentum refer here
https://brainly.com/question/30677308#
#SPJ11
What does kinetic energy depend on? (choose all that apply)
a mass
b height
c speed
d time
Kinetic energy depends on the mass and the motion
A laser beam is aimed through a circular aperture of diameter 1 mm.
a. If the laser beam is red with a wavelength of 632. 8 nm, what is the angle from the center of the Airy disk to the first dark ring? (2 points)
sin(p) = 632. 8*10^-9 /. 001
sin^-1(. 0006328) =. 0363 degrees
b. If the screen you are projecting the Airy disk onto is 2 m from the aperture, what is the distance between the center of the disk and the first dark ring? (2 points)
Thanks everyone who can help!
The angle from the center of the Airy disk to the first dark ring is 0.0363 degrees, and the distance between the center of the disk and the first dark ring on a screen 2 meters away from the aperture is: 1.268 mm.
a. To find the angle from the center of the Airy disk to the first dark ring, we will use the formula sin(p) = (wavelength) / (aperture diameter). Plugging in the values, we get sin(p) = 632.8 * 10^-9 / 0.001. Then, we calculate the inverse sine, sin^-1(0.0006328) = 0.0363 degrees.
b. To determine the distance between the center of the Airy disk and the first dark ring on a screen that is 2 meters from the aperture, we will use the formula distance = (angle) * (distance to screen).
In this case, distance = 0.0363 degrees * 2 meters.
First, convert the angle to radians: 0.0363 degrees * (pi / 180) = 0.000634 radians.
Then, multiply by the distance to the screen: 0.000634 radians * 2 meters = 0.001268 meters or 1.268 mm.
In summary, the angle from the center of the Airy disk to the first dark ring is 0.0363 degrees, and the distance between the center of the disk and the first dark ring on a screen 2 meters away from the aperture is 1.268 mm.
To know more about aperture, refer here:
https://brainly.com/question/8062356#
#SPJ11
Complete question:
A laser beam is aimed through a circular aperture of diameter 1 mm.
a. If the laser beam is red with a wavelength of 632. 8 nm, what is the angle from the center of the Airy disk to the first dark ring? (2 points)
sin(p) = 632. 8*10^-9 /. 001
sin^-1(. 0006328) =. 0363 degrees
b. If the screen you are projecting the Airy disk onto is 2 m from the aperture, what is the distance between the center of the disk and the first dark ring? (2 points)
Write a short paragraph describing why you think the outcomes of scientific investigations related to universal laws would be similar regardless of what part of the world they might be conducted
Because universal laws are principles that apply consistently across the universe, regardless of place or culture, the findings of scientific inquiries into universal laws would be comparable regardless of where they were done.
These principles are founded on empirical observations and experiments, thus they may be tested and repeated in many circumstances. Scientists perform their research using the same rigorous standards and procedures, regardless of where they are done, to guarantee that their findings are legitimate and credible. As a result, the rules of physics, chemistry, biology, and other disciplines would be the same in any area of the planet, as would the results of scientific inquiries into them.
To learn about universal laws
https://brainly.com/question/4936600
a stationary magnet has its north pole pointing upward. a conducting circular loop is moving downwards beneath the magnet. the induced current in the coil, as seen from above, and the force on the conducting loop due to the magnet are:
As the loop moves away from the magnet, the force weakens and is greatest when it is directly beneath the magnet.
When a conducting circular loop moves downwards beneath a stationary magnet with its north pole pointing upward, an induced current is produced in the loop. This induced current flows in a counterclockwise direction, as seen from above.
Additionally, the loop experiences a force due to the magnet. This force is perpendicular to both the direction of motion of the loop and the direction of the magnetic field produced by the magnet. The force is given by the formula F = BIL, where B is the strength of the magnetic field, I is the current induced in the loop, and L is the length of the loop that is in contact with the magnetic field.
Since the loop is moving downwards, the force on it is upwards, opposite to the direction of motion. The force is strongest when the loop is directly under the magnet and decreases as the loop moves away from the magnet.
To learn more about : magnet
https://brainly.com/question/14997726
#SPJ11
During a new moon the moon is where in relation to the sun and earth?.
During a new moon, the moon is located between the sun and the Earth. The illuminated side of the moon is facing away from the Earth and towards the sun, so it is not visible from the Earth.
The side of the moon facing the Earth is in shadow, which is why a new moon is not visible in the night sky. The alignment of the sun, Earth, and moon during a new moon is also what causes a solar eclipse, when the moon passes directly in front of the sun, blocking its light from reaching the Earth.
To know more about illuminated side refer here
https://brainly.com/question/30371476#
#SPJ11
